Huawei B2338-168ODU User manual

LTE Outdoor CPE B2338-168
(Package includes B2338-168ODU & B2338-168IDU)
V100R001C00
Quick Start Guide
Issue
Draft A
Date
2016-10-18
HUAWEI TECHNOLOGIES CO., LTD.

Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[email protected]

LTE CPE B2338-168
Quick Start Guide
About This Document
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
About This Document
Change History
Changes between document issues are cumulative.
The latest document issue contains all the changes made in earlier issues.
Draft A (2016-10-18)
This issue is the first release.

LTE CPE B2338-168
Quick Start Guide
Contents
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
Contents
About This Document.................................................................................................................... ii
1 What You Need..............................................................................................................................1
2 ODU and IDU Panels...................................................................................................................2
2.1 ODU Panel....................................................................................................................................................................2
2.2 IDU Rear Panel.............................................................................................................................................................3
2.3 IDU Front Panel............................................................................................................................................................4
3 Installation......................................................................................................................................6
3.1 Select a Location...........................................................................................................................................................6
3.2 Mounting the Device ....................................................................................................................................................6
4 Connect to the Internet...............................................................................................................10
4.1 Login in the web GUI.................................................................................................................................................10
4.2 Operation in the web GUI...........................................................................................................................................11
5 Europe - EU Declaration of Conformity ..............................................錯誤! 尚未定義書籤。

LTE CPE B2338-168
Quick Start Guide
1 What You Need
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1 What You Need
LTE Outdoor CPE
LTE IDU Device
Quick Start Guide
Mount Kit: Washer*2, Metal
Strap*2, Bracket
One ground cable and one
RJ-45 cable for connecting IDU
and computer
Power Adapter & Power
Plug
CAT5 Outdoor Shielded
Patch Ethernet cable for
connecting IDU and ODU
(not included in the
package)

LTE CPE B2338-168
Quick Start Guide
2 ODU and IDU Panels
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
2 ODU and IDU Panels
2.1 ODU Panel
1. One SIM card slot for inserting SIM card.
2. One RJ-45 connector for connecting to the IDU POE port.
3. LED indicator inside.
4. A grounding screw on the rear panel.
ODU LED Indicators as the following table.
LED
name
Location
Color
LED Behavior
Status Indication
LED list
-
-
-
Main
Power
Blue
ON
Power On
Blinking
Factory Reset
OFF
Power Off

LTE CPE B2338-168
Quick Start Guide
2 ODU and IDU Panels
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
LED
name
Location
Color
LED Behavior
Status Indication
Ethernet
Status
Yellow
Steady ON
Ethernet connected
Blinking
Upgrading
OFF
No Ethernet action
SIM
status
Green
Steady ON
SIM Detected
Blinking when
On-hook
PUK / PIN Code
OFF
No SIM Detected
4G Status LED : Link
Status
When CPE is power on, each LED indicates each link
status
4G-Signal
Blue
Chasing light
Searching
Blue
Blinking
Network Entry
4G-1
Blue
Steady ON
SINR < 0dB
4G-2
Blue
Steady ON
0dB ≤ SINR < 4dB
4G-3
Blue
Steady ON
4dB ≤ SINR < 9dB
4G-4
Blue
Steady ON
9dB ≤ SINR < 16dB
4G-5
Blue
Steady ON
16dB ≤ SINR
2.2 IDU Rear Panel

LTE CPE B2338-168
Quick Start Guide
2 ODU and IDU Panels
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
1. Phone: Connect your telephone to indoor device with an RJ-11 telephone cable.
2. WPS button: Enable the user to configure WiFi security on WPS-enabled devices.
3. LAN ports: Connect PC, Hub, switch or other network equipment by using RJ-45
Ethernet cable.
4. PoE port: Connect with ODU RJ-45 connector.
5. Reset button: To reboot the device, press and hold the reset button less than 5 seconds.
To reset the device to factory defaults, press and hold the reset button more than 5
seconds.
6. Power switch: Power on or power off.
7. Power port: Connect the power adapter.
2.3 IDU Front Panel
.
IDU LED Indicators as the following table.
No.
LED name
Color
LED Behavior
Status Indication
1
Main Power
Green
On
Power On
Off
Power Off
2
System
Green
On
System is connected
Blinking
System is upgrading
Off
System is disconnected
3
LTE SIGNAL
STRENGTH
Green
On
Display signal Strength
1 LED: SINR< 0dB
2 LEDs: 0dB ≤ SINR < 4dB
3 LEDs: 4dB ≤ SINR < 9dB

LTE CPE B2338-168
Quick Start Guide
2 ODU and IDU Panels
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
No.
LED name
Color
LED Behavior
Status Indication
4 LEDs: 9dB ≤ SINR< 16dB
5 LEDs: 16dB ≤ SINR
Off
No signal
Chasing light
Searching
Blinking
Network Entry
4
LAN 1 & 2
Green
Blinking
Ethernet connected
Off
No Ethernet connected
5
2G
Green
On
Enable 2.4G WiFi
Blinking
Data Transmission
Off
Disable 2.4G WiFi
6
5G
Green
On
Enable 5G WiFi
Blinking
Data transmition
Off
Disable 5G WiFi
7
Phone 1 & 2
Green
On
Registered
Blinking
Busy
Off
De-registered

LTE CPE B2338-168
Quick Start Guide
3 Installation
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
3 Installation
Before installing the ODU, please verify that you have all the items listed in 1 What You Need.
If any of the items is missing or damaged, please contact your LTE service provider.
3.1 Select a Location.
The ODU should be pole-mounted outdoors and aligned so its antenna faces the nearest LTE
base station. When selecting a suitable location for the unit, consider these guidelines:
1. When choosing a location to install the ODU, please note that the ODU's front panel
should point towards your service provider's nearest base station.
You do not need to be able to see the base station from the ODU's position. However, if
you experience the difficulties with signal reception, a Line of Slight (LoS) connection
may have better result.
2. Place the ODU away from power and telephone lines.
3. Avoid placing the ODU nearby any metallic reflective surfaces.
4. Be sure to ground the ODU with an appropriate grounding wire by attaching it to the
grounding screw on the unit and to a good ground connection.
3.2 Mounting the Device
Step 1 Preparation.
1. SIM card is inserted in the SIM slot by following the direction mark.
2. Make sure the grounding screw on the rear panel.
3. Connect a Grounding cable between the ground terminal of the ODU (marked ) and a
ground connection. (Suggest to with Ethernet lighting protector between Ethernet cable
and indoor PoE supplier for better lighting and surge protection).
4. For additional lightning protection, it is recommended to use a lightning arrestor
immediately before the Ethernet cable enters the building.