Hubbell Furnas Brand Series 54 User manual

Workplace Solutions
Gleason Reel Corp. • 600 South Clark St. • P.O. Box 26 • Mayville, WI 53050 • Phone: [phone] • www.hubbell-gleason.com 25
Series 54 Rotary Limit Switches
Limit the travel of electrically operated doors, conveyors, hoists, machine tool work tables and similar devices. Equipment having rotating
mechanisms, or linear motion which can be translated into rotational motion, can be controlled by these versatile switches. Series 54 switches can
be mounted in any position and are easy to wire and adjust.
Switches Feature
• Four Gear Ratios
• Standard, Long Dwell or Fine Adjustment Cams
• Right or Left Hand Shaft
• Easy to Wire and Adjust
• Mount in Any Position
• Rugged Die-cast Aluminum Housing
• Available for NEMA 1, NEMA 4, and NEMA 12 Applications
• Multi-use Shaft - Attach Drive Sprocket using Woodruff Key, Pin or Setscrew
Application
Series 54 switches are designed to serve as pilot controls for magnetic reversing starters and contactors which in turn make and break full voltage between
line and load. Contacts in the switch are operated when the external shaft is rotated. For the switch to perform a pilot control function, the contact must be
wired in series with the coil circuit of a magnetic reversing starter or contactor.
The shaft may rotate in either direction. When tripped, if rotation direction is reversed, the contacts will reset in 1/4 to 1 1/2 turns, depending on shaft-to-cam
ratio. Switches with Long Dwell Cams are available. These cams provides for the contacts to be actuated for a longer period of time as might be required in
hoist or similar applications.
Fine adjustment cams are also available. This feature increases accuracy in setting the number of turns to cause the contact to operate.
MODELS–Series 54 Model numbers are for RIGHT HAND SHAFT. For left hand shaft add Lto model number.
LIMIT SWITCHESLIMIT SWITCHES
Kits include switch block, cam and mounting hardware
Contact Block Specifications
15 Amp 120, 240, 480 or 600 VAC.
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC
0.8 Amp 115 VDC, 0.4 Amp 230 VDC
Pilot Duty 600 VAC Max.
Gear
Ratio
Turns of Drive Shaft to Trip Contacts Contact
Blocks
Circuits NEMA 1 & 12
Industrial Use
Model No.
NEMA 4
Watertightse
Model No.
Max. Min. Overtravel Reset NO NC
Standard Cams
18 to 1 16 1 1.75 0.25
2
3
4
2
3
4
2
3
4
54BB23FE
54BB33FE
54BB43FE
54BB23EE
54BB33EE
54BB43EE
36 to 1 32 1 3.5 0.5
2
3
4
2
3
4
2
3
4
54BB23FB
54BB33FB
54BB43FB
54BB23EB
54BB33EB
54BB43EB
72 to 1 64 1.5 7.5 1
2
3
4
2
3
4
2
3
4
54BB23FC
54BB33FC
54BB43FC
54BB23EC
54BB33EC
54BB43EC
108 to 1 96 2 11 1.5
2
3
4
2
3
4
2
3
4
54BB23FD
54BB33FD
54BB43FD
54BB23ED
54BB33ED
54BB43ED
Long Dwell Cams
18 to 1 15 1 2.5 0.5
2
3
4
2
3
4
2
3
4
54EB23FE
54EB33FE
54EB43FE
54EB23EE
54EB33EE
54EB43EE
36 to 1 30 1.5 5 1
2
3
4
2
3
4
2
3
4
54EB23FB
54EB33FB
54EB43FB
54EB23EB
54EB33EB
54EB43EB
72 to 1 60 2 10 1.5
2
3
4
2
3
4
2
3
4
54EB23FC
54EB33FC
54EB43FC
54EB23EC
54EB33EC
54EB43EC
108 to 1 90 2 15 3
2
3
4
2
3
4
2
3
4
54EB23FD
54EB33FD
54EB43FD
54EB23ED
54EB33ED
54EB43ED
Fine Adjustment
18 to 1 16 1 1.75 0.25 2 2 2 54BB73FE 54BB73EE
36 to 1 32 1 3.5 0.5 2 2 2 54BB73FB 54BB73EB
72 to 1 64 1.5 7.5 1 2 2 2 54BB73FC 54BB73EC
108 to 1 96 2 11 1.5 2 2 2 54BB73FD 54BB73ED
2.13
(54)
(4) Mounting Holes
for No. 10 Screw
Tapped for
1" Conduit
Approximate Shipping
Weight 6 lbs (2.7 kg)
0.50
(13)
0.56
(14)
3.31
(84)
3.50
(89)
4.25
(108)
1.81
(46) 1.81
(46)
5.31 (135)
4.875 (124)
1.00(25)
0.625(16)
Dimensions–inches (mm)
Field Modifications
Contact Block Kit (1 NO 1 NC) Cat. No.
Standard Cam
Long Dwell Cam
54BBGB
54EBGB
Contact Block Kit (2 NO 2 NC) Cat. No.
Standard Cam
Long Dwell Cam
54BBGD
54EBGD
Accessories Cat. No.
Adjustment Tool D27760001