Digital Programmable Timer
KEY FEATURES
• Supports multiple timer intervals
• Energy code presets for Title 24, IECC, and ASHRAE 90.1
• Visual and audible turnoff warning
• 3 Way and Multiple Way Switching
• No Neutral Required
• No Load Requirement
• Dip switch control of features
• Zero Arc Point Switching
• UL and cUL listed
• Five-year warranty
OVERVIEW
With its aesthetically pleasing features, the TD300 combines style with functionality as it provides energy saving control of in-
candescent and fluorescent lighting, as well as certain motor loads such as fans, hot tub heaters and circulating pumps. The timer
offers two presets for energy code compliance – two hour timing for Title 24 and IECC and 4 hour timing for ASHRAE 90.1. A
timed override allows lights and HVAC (heating, ventilating and air conditioning) to remain on for a specified amount of time for
after-hours cleaning crews. The TD300 is easy to install and can replace any wall switch.
FEATURES and BENEFITS
Features Benefits
Energy Code Presets • 2 hour timer for Title 24 and IECC
• 4 hour timer for ASHRAE 90.1
Supports multiple timer intervals • A turnoff timer can be set in the following intervals
- 5 minute steps between 5 minutes – 1 hour
- 10 minute steps between 1-4 hours
- 30 minute steps between 4-12 hours
-1 hour steps between 12-24 hours
Timed manual override option • A button push keeps lights and HVAC on past the preset
turnoff for a specified amount of time
• Adjustable to accommodate lighting for after-hours cleaning
crews
Visual and audible warnings • Provides one second flicker or beep warning:
- Flicker warning is at two minutes before the turnoff
- Beep warning starts two minutes before turnoff
and continues every fifteen seconds
Zero Arc Point Switching • Provides support for any lighting load, such as:
- Electronic ballasts
- Incandescent lighting
- Motor loads (the maximum electrical loads for a circuit)
TD300
Hubbell Building Automation, Inc. |9601 Dessau Road |Building One |Austin, Texas 78754 |{512} 450-1100 |{512} 450-1215 fax
hubbell-automation.com
5.2013
