HuddleCamHD HuddlePair User manual

HuddleCamHD HuddlePair Quick Start Guide
When you first receive your HuddlePair read through the included manual. Inside the
box, you will find your webcam, a speakerphone, a user manual, a USB 2.0 charging cable, and
a USB power adapter. Once you have read through the included manual, you can start by
plugging your HuddlePod Air speakerphone into a power source using the included USB 2.0
charging cable and USB power adapter. The HuddlePod Air can be used completely wirelessly
using the built-in battery for up to 7 hours. For many conference room scenarios, we suggest
keeping the HuddlePod Air plugged into power.
Next, you can decide whether you would like to secure your HuddlePair to top an existing LCD
display or use the built-in quarter-twenty mounting screw to attach the camera to a standard

mount. For this example, we will secure the HuddlePair camera to an LCD monitor by placing
the mounting base securely on the top of an LCD monitor using the included clamp.
The HuddlePair only requires one USB 2.0 connection to your dedicated computer or
laptop for use. You can go ahead and plug this USB 2.0 cable to your computer. The
HuddlePair drivers will automatically load the very first time you connect the system. This single
USB 2.0 cable will provide your favorite video conferencing software with access to a webcam,
speaker, and microphone.
Once your HuddlePod air is fully charged you can decide whether you want to keep it
plugged in or use it wirelessly. You can now go ahead and turn on your HuddlePod Air with the
on button in the center of the device. Notice the buttons used for mute, speaker on and off, and
volume controls. Once your HuddlePod Air is on, it will be available to your computer as your
microphone and speaker.
You can now select the HuddlePair as your webcam, microphone and speaker in your
video conferencing software. It’s that easy.