Huion Inspiroy 2 S User manual

Inspiroy 2 S M L
Contents
Product Overview ...................................................... 2
Introduction ......................................................... 2
Accessories ......................................................... 2
Connection .......................................................... 4
Driver Installation ..................................................... 6
Windows ........................................................... 6
mac .............................................................. 9
Linux ............................................................. 12
Driver ............................................................. 21
Driver Interface Overview ............................................... 21
Pen Tablet Setting .................................................... 23
Digital Pen Setting .................................................... 36
Driver Setting ....................................................... 41
How to Use the Digital Pen .............................................. 45
Troubleshooting ...................................................... 46
1 / 48

Inspiroy 2 S M L
Product Overview
Introduction
Thanks for choosing HUION Inspiroy 2 pen tablet (Inspiroy 2 S/M/L). Inspiroy 2, the second
generation of the HUION Inspiroy series, is a professional pen tablet that owns an innovative
Scroller and programmable press keys, which enables you to enjoy drawing and creating with
higher efficiency. With HUION Inspiroy 2 pen tablet, you can freely write and draw, making
lines varied in width, painting pictures in different shades of colors, and gaining a pen-on-
paper experience.
To better know and use this product, please read this user manual carefully.
Note: The pictures in the User Manual are for reference only and may be subject to change
depending on the operating system as well as the driver version. A change in design or
specification may also occur without notice.
Accessories
Please see the detailed product introduction.
2 / 48

Inspiroy 2 S M L
Indicator Light:
There is an indicator light on the pen tablet to help you check the status of the pen tablet and
the digital pen. Detailed information for reference is down below:
Product Color Status
Inspiroy 2 S Dim white light The pen tablet is connected to a device successfully via a cable.
Brig
ht
white
light
The pen signal is detected or any of the press keys is pressed.
Product Color Status
In
spi
Bright white light The pen tablet is connected to a device successfully via a cable.
3 / 48

Inspiroy 2 S M L
roy
2
M/
L
Scroller:
Roll the wheel to execute the currently set function.
Group Key:
Each Group Key controls a group of shortcuts assigned to the 8 programmable press keys and
the Scroller of a pen tablet. You can set them in the driver.For more information.
Accessories
After unboxing your package, make sure that you have the following items:
Pen Tablet*1
Battery-free Digital Pen*1
Pen Holder*1
Pen Nib*10
USB-C Cable*1
Quick Start Guide*1
Connection
4 / 48

Inspiroy 2 S M L
Wired Connection
1. Take out the USB-C cable from the box (Some computers require a USB-C adaptor), and use
it to connect Inspiroy 2 to a computer.
2. Please choose and download the correct driver Driver-Inspiroy 2 S/M/L from our official
website.
3. Open the driver and a picture of Inspiroy 2 will appear, indicating that the pen tablet is
successfully connected to your computer. Now you can use your pen tablet.
Android System Connection
1. Make sure that the operating system of your phone or tablet is above Android OS 6.0 or
HarmonyOS and supports OTG;
2. For certain models, you need to enter the Setting page of your phone or tablet to enable
"OTG";
3. Take out the USB-C adaptor and connect the pen tablet to your phone or tablet as shown in
the figure below.
5 / 48

Inspiroy 2 S M L
Driver Installation
Windows
How to Install the Driver on Windows Device
Notice:
① Before installing the driver, please close all graphic software and antivirus programs. The
6 / 48

Inspiroy 2 S M L
note (“HuionTabletCore.exe” failed to launch!) below appears only on devices with Windows
OS, indicating that the driver is blocked by antivirus programs or drawing applications.
② Please make sure your computer operating system is Windows 7 or later.
③ Open the driver and a picture of Inspiroy 2 will appear, indicating that the pen display is
successfully connected to your computer. Now you can use your pen display.
④ If the connection fails, please restart the driver or your computer.
Note: The pen display cannot work once the driver is uninstalled or deleted. In this case
please click Driver-Inspiroy 2 to reinstall a driver, and your pen display and digital pen will
restore to their default settings.
Driver Installation
1. Connect the pen display to your computer.
2. Choose the correct driver for your device from our website:Driver-Inspiroy 2
3. Click Driver-Inspiroy 2 to download it.
4. Double-click the driver and click “OK” to proceed.
5. Check the box to agree with the User Agreement and click “Install Now”.
7 / 48

Inspiroy 2 S M L
6. After the installation has been completed, click on “Try it now”.
7. A picture of Inspiroy 2 will appear on the driver interface to indicate a successful
connection. Now you can use your pen display.
8 / 48

Inspiroy 2 S M L
mac
How to Install the Driver on Mac Device
Notice:
1. Please make sure your computer operating system is macOS 10.12 or later.
2. Open the driver and a picture of Inspiroy 2 will appear, indicating that the pen display is
successfully connected to your computer. Now you can use your pen display.
3. If the connection fails, please restart the driver or your computer. For more information,
please refer to Troubleshooting. See section.
Note: The pen display cannot work once the driver is uninstalled or deleted. In this case
please click Driver-Inspiroy 2 to reinstall a driver, and your pen display and digital pen will
restore to their default settings.
Driver Installation
1. Connect the pen display to your computer.
9 / 48

Inspiroy 2 S M L
2. Choose the correct driver for your device from our website: Driver-Inspiroy 2
3. Click Driver-Inspiroy 2 to download it.
4. Unzip the driver file and drag the HuionTablet driver application into the “Applications”
folder.
5. Open the folder and then find and double-click the HuionTablet driver application.
6. Connect the pen display to your Mac, and click “Open System Preferences" when prompted.
Go to Security & Privacy > Privacy > Accessibility settings and click the lock icon to unlock the
settings.
Tick the checkbox on the left of the HuionTablet driver application to enable accessibility. Then
click the lock icon to lock the settings.
10 / 48