HULALA HOME TVSBSD0505 User manual

NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for
future reference.
1/16
ITEM NO. TVSBSD0505

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers
or polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
80LBS
16

PARTS
LIST
16

Explosive View
16

HARDWARE
LIST
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
16
SPARE
S
6
91
9

6 16
ASSEMBLY
INSTRUCTIONS
Place panel 1 on clean padded surface.
Use screwdriver and screw E to
connect push catch J with panel
1,insert wood dowel D into panel 1,use
screwdriver to connect cam bolt A with
panel 1,make sure all holes aligned
and fasten all screws to secure.
Use screwdriver and cam lock B to
connect panel 3,5,6,4 with panel
1,make sure all parts aligned and
fasten all cam lock to secure,then
cover the cam lock B with sticker L.

16
7
3
Insert panel 9 & 10 into the grooves of
panel 4,6,5,3,insert wood dowel D
into panel 3,5,6,4,make sure
Use allen key M and bolt C to
connect panel 2 with assembled
unit1,3,5,6,4,make sure all
aligned and fasten all bolts
to secure.

16
Rx6
R
R
R
Use screwdirver and
screw E to connect
metal connector R with
panel 2,then fasten
screws to secure.
Connect leg 13 & 14 with
metal connector on panel 2,
then fasten to secure.
Ex24
624

9 16
8
Turn the assembled unit
upright.
Use screwdriver to connect
screw E and plastic
connector H with back
panel 9 & 10, fasten to
secure. 9
9
10
Use screwdriver to connect screw E
with tipping kits O on rear edge of top
panel 1,then fasten to secure.

16
9
10
Insert part I into the holes of panel
3,5,6,4,make sure all holes aligned
Slide shelf 7 & 8 into place on part I.
Insert shelf pin I into desired level on part 3,5,6,4

11 16
11
12
Use screwdriver to connect screw E with round
metal catch K and hinge F on left door panel 11
& right door panel 12,fasten to secure.
Use screwdriver to connect screw E with hinge G
on center door panel 12,then fasten to secure.

12 16
13
F*4
Use screwdriver to connect screw E and hinge F on
left door panel 11 & right door panel 12 with left panel
3 and right panel 4,make sure all holes and hinges
aligned,fasten to secure
Slightly loose bolt on hinge and carefully reposition
the door to set the door properly aligned

13 16
14
G*2
Use screwdriver to connect screw E with hinge G
on center door panel 12 on panel 6,mae sure all
holes and hinges aligned and fasten to secure.

14 16
15
Please adjust the levelevs to keep the cabinet in balance.

15/16
16
Install the .
1. Mark the position on the wall, this should be same as the position of O
where are on of panel 1; Drilled and insert the Q
by hammer;
2.Assemble the part O on the wall. Align the hole in the part O to the
expandable screw Q, screw N in and tighten by screwdriver S;
3.let the plastic belt P go through the both O and pull to tighten.
N
Q
Q
N
Q

Are you having
with assembly? Missing
send email with your order
For return, Please check the return policy
the retailer or MarketPlace you bought
Appreciated your purchasing from us.
Pop up your life by our furniture
16/16
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us
with product or service as needed. We provide 30 days
warranty starting from the time you receive the item. Each
customer must provide a record of their order such as the
order number, or item receipt for any items that are out of
the warranty period you may also still receive replacement
parts by purchasing them with our company if they are
available.