HULALA HOME SBHM0691 User manual

ITEM NO.SBHM0691
NOTE:
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
HULALA
H O M E
01/24

MAINTAINANCE
AND WARNING
Keep furniture away from heat sources.
Do not clean furniture with harsh cleaner
or polishes. Do not use detergents,
Solvents, abrasives, spray packs or
leather cleaner. Usenon-color mild soap
with warm water to clean spills(Mix 1:10
soap to water)
Do not place furniture under direct
sunlight, material will possibly fade over
time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture that is not
protectedby a padded barrier .
Not for commercial use, only for
residential use 。
Weight Limitation
100LBS
02/24

OVERVIEW
A
B
C
D
E
F
G
G
L
L
L
L
M
H
I
J
K
03/24

Persons Required For Assembly
：
HARDWARE
LIST
A
2Personen
1 PC
BCD
1 PC 1 PC 1 PC
E
1 PC
FG
2 PCS
H
IJL
K
1 PC
1 PC
1 PC
M
1 PCS
4 PCS
1 PC
1 PC
04/24

PARTS
LIST 1
Be sure to inspect all packing material
carefully for small parts, that may have
come loose inside the carton during
shipment.
SPARE
x52
󲹰1
x26
󲹰2
x1
x1
󲹰1
󲹰2
05/24

PARTS
LIST 2
Be sure to inspect all packing material
carefully for small parts, that may have
come loose inside the carton during
shipment.
x4
x8
x4 x4 x8
󲹰󲺂 󲹰󲺃 󲹰󲺄
󲹰󲺀 󲹰4
x4
󲹰8 󲹰󲺆
󲹰1󲹽
󲹰11 󲹰12
x4 x2 x1 x1
06/24

ASSEMBLY
INSTRUCTIONS
STEP1:
Prepare leg (L) 、 bottom panel (B) and bolt #3
、allen key
#12.Use bolt #3 to attach leg (L) to bottom panel (B),make
sure all holes aligned and tighten bolt #3 with allen key #12.
#12 󲻅1 󲻅󲺅
#3󲻅󲺅
#12
#3
#3
#3
L
L
L
L
L
#3
B
#3
07/24

STEP2:
Prepare leg (M)Screw leg (M) into the corresponding hole of
bottom panel (B) with hand.
B
B
M
08/24

STEP3:
Prepare side panel (C) and middle vertical panel (E).
Insert side panel (C) &middle vertical panel (E) into the
preassembled step 2 ,use allen key #12 to lock it
#12
#12
C
BB
C
C
E
E
B
B
E
#12 x1
09/24

STEP4:
Prepare side panel (D).Insert side panel (D) into the
preassembled step 3
, use allen key #12 to lock it.
#12
C
E
D
D
B
B
D
#12 x1
10/24

#12
#12
#12
A
C
E
D
C
AE
A
D
A
#12 󲻅1
STEP5:
Prepare top panel (A).
Insert top panel (A) into the preassembled step 4
,use allen
key #12 to lock it.
11/24

F
F
#11 󲻅1 #2 󲻅2󲺃
#11
#2󲹭󲻅2󲺃
#2 F
D
C
STEP6:
Prepare back panel (F).
Open bake panel (F), and then insert back panel (F) into the
groove of preassembled step 5, use screw #2 to attach back
panel (F) to preassembled
step 5.
Open
12/24

STEP7:
Prepare shelf holder #6 and panel (G).
Insert shelf holder #6 into the corresponding hole of panel
(C)&(E)&(D),make sure shelf holders #6 are level
，and then
attache panel (G) to it.
Shelf holder can be
adjusted up or down
#6 󲻅󲺅
#6󲻅󲺅
E
D
#6
CG
G
#6
#6
#6
#6
#6
#6
#6
13/24

STEP8:
Prepare door (H)&(K)
、hinge #4、 screw #1 and
screwdriver #11.Use screw #1 to attach hinge #4 to doors
(H)&(K)， make sure all holes aligned and tighten screw #1
with screwdriver #11.
H
K
#11 󲻅1 #1 󲻅󲺅 #4 󲻅4
#11
#4󲻅4
#1󲻅󲺅
#1
#1
#4
#4
#1
#4
#1
#4
14/24

STEP9:
Prepare door (I)&(J)、
hinge #5 、screw #1 and screwdriver
#11.Use screw #1 to attach hinge #5 to doors (I)&(J)
，make
sure all holes aligned and tighten screw #1 with screwdriver
#11.
#11
#1󲻅󲺅
#5󲻅󲺁
#1
#1
#5
#1
#5
#5
#1
I
J
#11 󲻅1 #1 󲻅󲺅 #5 󲻅󲺁
#5
15/24

STEP10
:
Prepare preassembled doors (H)&(K)
、 the preassembled step
7 、
screw #1 and screwdriver #11.
Aligne the corresponding hole of preassembled doors (H)&(K)
with the corresponding hole of side panel (C)&(D)
，and then
use screw #1 to attach hinge #4 to side panel (C)&(D),tighten
screw #1 with screwdriver #11.
#11 #1󲻅1󲺃
#4
K
C
D
#11 󲻅1 #1
󲻅1󲺃
H
C&D
H&K
H&K
C&D
16/24

STEP11:
Prepare preassembled doors (I)
、 the preassembled step10
、 screw #1 and screwdriver #11.Aligne the corresponding
hole of preassembled door (I) with the corresponding hole of
middle vertical panel (E)
， and then use screw #1 to
attach hinge #5 to middle vertical panel (E),tighten screw #1
with screwdriver #11.
I
#1󲻅󲺅
#11
#5
E
#11 󲻅1 #1 󲻅󲺅
I
E
I
E
17/24

#1󲻅󲺅 #11
#5
J
#11 󲻅1 #1 󲻅󲺅
STEP12:
Prepare preassembled doors (J)
、 the preassembled step 11
、 screw #1 and screwdriver #11.Aligne the corresponding
hole of preassembled door (J) with the corresponding hole of
middle vertical panel (E) ， and then use screw #1 to attach
hinge #5 to middle vertical panel (E),tighten screw #1 with
screwdriver #11.
J
E
E
E
J
18/24

Hinge adjustment method
Horizontal
by screw adjustment!
Vertical via slots in
the mounting plate
or via cam adjustment!
Concealed hinges are three-way adjustable:
Side panels
Door
Side panels
Door
Side panels
Door
In-and-out
by loosening the hinge arm
mounting screw or via cam
adjustment!
Side panels
Door
Side panels
Door
Side panels
Door
Concealed hinges are three-way adjustable:
Concealed hinges are three-way adjustable:
19/24

STEP13:
Attention:
After installation, adjust the adjustable leveler to keep the
cabinet balanced .
Attention:
After installation, adjust the
adjustable leveler to keep
the cabinet balanced .
20/24