Hunter XC hybrid Operating instructions

SEASONAL ADJUSTMENT WATER DAYS
ALL
MANUAL-ALL STATIONS START TIMES
SYSTEM OFF CURRENT TIME/DAY
1
MANUAL-ONE STATION RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
PRG
Battery Operated Controllers
Owner’s Manual and
Programming Instructions

ENG
Introduction���������������������������������������������������������������������� 1
XC Hybrid Components������������������������������������������������� 1
Mounting the Controller to the Wall��������������������������������� 3
Connecting Valves ������������������������������������������������������������ 3
Installing Batteries ����������������������������������������������������������� 4
Connecting a Master Valve ����������������������������������������������� 4
Connecting a Weather Sensor������������������������������������������� 5
Testing the Weather Sensor ������������������������������������������� 5
Manually Bypassing the Weather Sensor ������������������������� 5
Power Failures ������������������������������������������������������������������ 6
Installing the Transformer (optional)��������������������������������� 6
Watering Schedule������������������������������������������������������������ 7
Programming the Controller ��������������������������������������������� 8
Setting the Date and Time �������������������������������������������� 8
Setting the Program Start Time(s) ���������������������������������� 8
Eliminating a Program Start Time ����������������������������������� 9
Setting Station Run Times ��������������������������������������������� 9
Setting Days To Water �������������������������������������������������� 9
Selecting Specific Days of the Week to Water ����������������� 9
Selecting Interval Watering ����������������������������������������� 10
Setting Event Day(s) Off����������������������������������������������� 10
Automatic Watering ���������������������������������������������������� 10
System Off������������������������������������������������������������������ 10
Programmable Rain Off ����������������������������������������������� 10
Seasonal Adjustment �������������������������������������������������� 11
Manually Run a Single Station ������������������������������������� 11
Manually Run All Stations �������������������������������������������� 11
One Touch Manual Start and Advance �������������������������� 11
Advanced Features ��������������������������������������������������������� 12
Programmable Sensor Override ����������������������������������� 12
Test Program of All Stations����������������������������������������� 12
Easy Retrieve™ Program Memory��������������������������������� 13
Programmable Delay Between Stations������������������������� 13
Clearing the Controller's Memory/
Resetting the Controller ���������������������������������������������� 13
Troubleshooting Guide������������������������������������������������ 14
Specifications ����������������������������������������������������������������� 15
Operating Specifications ��������������������������������������������� 15
Electrical Specifications �������������������������������������������������� 15
Explanation of Symbols ����������������������������������������������� 15
Certificate of Conformity to European Directives����������� 16
TABLE OF CONTENTS

1
ENG
INTRODUCTION
XC HYBRID COMPONENTS
Introducing the latest addition to the Hunter XC controller
product line; the XC Hybrid (XCH) battery operated controller.
The XC Hybrid is a full-featured irrigation controller that
combines maximum programming flexibility with the versatility
of battery operation for a wide range of installations. Using
DC latching solenoid technology, the XCH is ideal for remote
or isolated installations that do not have access to AC power.
The XCH is truly a hybrid controller that can operate from a
wide variety of power sources. In situations where AC power is
available, a plug-in transformer can be used to supply power
to the controller. A solar panel option (coming soon) can also
be attached to the XCH to continually supply power to the
controller without the need for batteries.
16
PRG
15
18
17
B
A C
SEASONAL ADJUSTMENT WATER DAYS
ALL
MANUAL-ALL STATIONS START TIMES
SYSTEM OFF CURRENT TIME/DAY
1
MANUAL-ONE SATION RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
MO TU WE TH FR SA SU ODD
EVEN
AM PM
%24HR
2,4...30
1,3...29
13
2 3 911 4 6
10512
1
7
8
14
PLASTIC VERSION
STAINLESS VERSION

ENG
2
A – LCD Display
1. Run Times – Allows user to set each valve station run time
from 1 minute to 4 hours.
2. Start Times – Allows 1 to 4 start times to be set in each
program.
3. Station Number – Indicates currently selected station number.
4. Program Designator – Identies program (A, B, or C) in use.
5. Day of the Week – Identies day of the week.
6. Interval Watering – Identies month when programming
current date.
7. Odd/Even Watering – Identies if Odd or Even watering has
been selected.
8. Flashing Sprinkler – Indicates that watering is taking place.
9. System Off – Allows user to discontinue all programs and
watering. Also allows the user to set the programmable "rain
off" which stops watering for a period from 1 to 7 days.
10. Umbrella – Indicates that the rain sensor is active.
11. Seasonal Adjustment – Allows the user to make run time
changes according to the seasons without reprogramming the
controller. Bars on the left allow quick visual reference to the
seasonal adjustment percentage.
12. Rain Drop – Indicates watering will occur on the selected day.
13. Crossed Rain Drop – Indicates the watering will NOT occur
on the selected day.
14. Calendar – Indicates interval watering schedule has been
programmed. Icon also appears when programming the current
day.
B – Wiring Compartment
15. Terminal Strip – Use to attach transformer, sensor, and valve
wires from their source to the controller.
16. Reset Button – Use to reset the controller.
17. Battery Holder – Holds six AA alkaline batteries.
C – Control Buttons
Button – Increases the selected item ashing in the display.
Button – Decreases the selected item ashing in the display.
Button – Returns selected ashing display to previous item.
Button – Advances the selected ashing display to the next item.
Button – Selects program A, B or C for different watering zone
requirements.
18. Sensor Bypass Switch.
D – Dial Settings
Run – Normal dial position for all controller automatic and manual
operation.
Current Time/Day – Allows current day and clock time to be set.
Start Times – Allows 1 to 4 start times to be set in each program.
Run Times – Allows user to set each valve station run time from 1
minute to 4 hours.
Water Days – Allows the user to select interval days to water.
Seasonal Adjustment – Allows user to make run time changes
according to the seasons without reprogramming the controller.
Bars on the left allow quick visual reference to the seasonal
adjustment percentage.
1Manual-One Station – Allows user to activate a one-time
watering of a single valve.
ALL Manual-All Stations – Allows user to activate a one-time
watering of all valve stations or a few selected stations.
System Off – Allows user to discontinue all programs and
watering. Also allows the user to set the programmable rain off
which stops watering for a period from 1 to 7 days.
E – External Transformer (Optional)
A plug in transformer can be used to supply AC power to the
controller.

3
ENG
MOUNTING THE CONTROLLER TO THE WALL
1. Secure one screw into the wall. Install screw anchors if
attaching to drywall or masonry wall.
2. Slide the keyhole on top of the controller over the screw.
3. Secure the controller in place by installing screws in the
holes below the terminal strip.
CONNECTING VALVES
NOTE: The XCH operates DC latching solenoids
only (order Hunter P/N: 458200). 24 VAC solenoids
will NOT operate with the XCH. DC solenoids can
be easily identified by red and black leads. The red
lead is attached to the station output, while the
black lead is attached to the common wire.
1. Route valve wires between the control valve location and
controller.
2. At valves, attach a common wire to the black solenoid
wire on all valves. Attach a separate control wire to the
remaining red wire of each valve. All wire connections
should be done using waterproof connectors.
3. Route the valve wires through the conduit. Attach the
conduit through the bottom right side of the controller.
4. Secure the valve common wire to the C (Common) screw
on the terminal strip. Attach each of the individual valve
control wires to the appropriate station terminals and
tighten their screws.
WIRE SIZE DISTANCE FROM VALVE
TO CONTROLLER
18 AWG 550 feet
16 AWG 870 feet
14 AWG 1380 feet
12 AWG 2200 feet
Valve Common Wire
(Black Leads)
Valve 1
Valve 2
Valve 3
Valve 4
Station Wires
(Red Leads)

ENG
4
INSTALLING BATTERIES
PRG
SEASONAL ADJUSTMENT WATER DAYS
ALL
MANUAL-ALL STATIONS START TIMES
SYSTEM OFF CURRENT TIME/DAY
1
MANUAL-ONE SATION RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
XCH-Stainless
Battery Install
The XC Hybrid operates on six AA alkaline batteries, and the XC Hybrid Stainless uses
six C batteries. A battery carrier is supplied with your controller. Insert the batteries
as indicated on the battery carrier. Connect that battery connector inside the access
compartment to the battery carrier and insert the carrier into the lower left side of the
controller as shown. To access battery carrier on the XC Hybrid Stainless, remove the
screw in the top center of the controller and swing the facepack down as shown.
CONNECTING A MASTER VALVE
NOTE: Complete this section only if you have a
master valve installed in your irrigation system. A
master valve is a “normally closed”valve installed
at the supply point of the main line "that" opens
only when the controller initiates a watering
program.
1. At the Master Valve, attach the common wire to the black
solenoid wire of the valve. Attach a separate control wire to
the remaining red solenoid wire.
2. The common wire should be attached to the Cterminal
inside the controller. The other wire coming from the master
valve should be attached to the MV terminal inside the
controller. Tighten each terminal screw. Valve Common Wire
Valve 1
Valve 2
Valve 3
Valve 4
Valve
Wires
Master Valve
Master Valve Wire
(Black Lead)
(Red Lead)

5
ENG
CONNECTING A WEATHER SENSOR
A Hunter weather sensor or other micro-switch type weather
sensors can be connected to the XC. The purpose of this
sensor is to stop automatic watering when weather conditions
dictate. WRC (Wireless RainClik) is not compatible with
XCHybrid.
1. Remove the metal jumper plate that is attached across
the two SEN terminals inside the controller.
2. Connect one wire to one SEN terminal and the other wire
to the other SEN terminal.
When the weather sensor has
deactivated automatic watering, the
OFF, and icon will appear on the
display.
Testing the Weather Sensor
The XC provides simplified testing of a rain
sensor when the sensor is wired into the
sensor circuit. You can manually test proper
operation of the rain sensor by running
a MANUAL ALL STATIONS cycle or by
activating the system using the ONE TOUCH
MANUAL START (see page 11). During the
Manual cycle, pressing the test button on the Mini-Clik®will
interrupt watering.
Manually Bypassing the Weather Sensor
If the rain sensor is interrupting irrigation you can bypass it
by using the bypass switch on the front of the controller. Slide
the switch to the SENSOR BYPASS position to disable the rain
sensor from the system to allow for controller operation. You
can also bypass the weather sensor for manual operation by
using the MANUAL – ONE STATION function.
Mini-Clik Rain Sensor
/DAY
ACTIVE
BYPASS

ENG
6
INSTALLING THE TRANSFORMER (OPTIONAL)
POWER FAILURES
The XC Hybrid is designed to operate on batteries or 24
VAC power. If AC power is available, a 24 VAC output plug
in transformer can be attached to the two 24 VAC terminals
inside the lower access area.
The controller has non-volatile memory. Programmed
information will never be lost due to a power outage (when
using AC power) or if the AA batteries go dead. IN / OUT VERSION CATALOG
NUMBER
120/24 VAC US 526500
230/24 VAC European 545700
240/24 VAC Australian 545500

7
ENG
PROGRAM A PROGRAM B PROGRAM C
LOCATION
1
2
3
4
5
6
7
8
9
10
11
12
STATION
STATION RUN TIME STATION RUN TIME STATION RUN TIME
1
2
3
4
PROGRAM
START TIMES
HUNTER XC Hybrid
NOTES:
DAY OF THE WEEK
ODD/EVEN OR INTERVAL
MO
TU
WE
TH FR SUSA
MO
TU
WE
TH FR SUSA
MO
TU
WE
TH FR SUSA
WATERING SCHEDULE

ENG
8
PROGRAMMING THE CONTROLLER
5. The time will be displayed. Use the
and buttons to select AM, PM, or
24 hour. Press the
button to move
to hours. Hours will be flashing. Use
the and buttons to change the
hour shown on the display. Press the
button to move to minute. Minutes will
be flashing. Use the and buttons
to change the minutes shown on the
display. The date, day, and time have
now been set.
Setting the Program Start Time(s)
1. Turn the dial to the START TIMES
position.
2. The factory preset is set on program A.
If necessary, you can select program B,
or C by pressing the button.
3. Use the or button to change
the start time. (The start times advance in
15 minute increments).
4. Press the button to add an additional start time, or
button for the next program.
NOTE: One start time will activate all stations
sequentially in that program. This eliminates the
need to enter each station’s start time. Multiple
start times in a program can be used for separate
morning, afternoon, or evening watering cycles.
Start times may be entered in any order. The XC
will automatically sort them.
The XC display shows the time and day when the controller is
idle. The display changes when the dial is rotated to indicate the
specic programming information to enter. When programming,
the ashing portion of the display can be changed by pressing
the
or buttons. To change something that is not ashing,
press the or buttons until the desired eld is ashing.
Three programs A, B, and C, each with the ability to have four
daily start times, permit plants with different watering require-
ments to be separated on different day schedules.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed
or programmed. For illustration purposes in this
manual, flashing characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the CURRENT TIME/DAY
position.
2. The current year will be flashing. Use
the or buttons to change the year.
After setting the year, press the
button
to proceed to setting the month.
3. The month and day will be in the display.
The month will be flashing and the
icon will be displayed. Use the or
buttons to change the month. Press the
button to proceed to setting the day.
4. The day will be flashing and the
icon will be displayed. Use the or
buttons to change the day. Press the
button to proceed to setting the time.
CURRENT TIME/DAY
START TIMES
CURRENT TIME/DAY

9
ENG
Selecting Specic Days of the Week to Water
1. With the cursor on a specific day
(the cursor will always start with MO),
press the button to activate a
particular day of the week to water.
Press the button to cancel watering for that day. After
pressing a button the cursor automatically advances to the
next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show a to indicate their status is
ON. The last is the last day of watering for that program.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering
instead of specific days of the week (odd days: 1st, 3rd, 5th,
etc.; even days: 2nd, 4th, 6th, etc.).
1. With the cursor on Su press the
button once. The
icon and odd will
be displayed.
2. If odd day watering is desired, turn
the dial back to the run position.
3. If even day watering is desired, press
the button once. The icon and
EVEN will be displayed. You can move
back and forth from ODD to EVEN by
pressing the and buttons.
NOTE: The 31st of any month and February 29th
are always “off” days if Odd watering is selected.
Eliminating a Program Start Time
With the dial set to START TIMES
position, push the or button until
you reach 12:00 AM (Midnight). From
here push the button once to reach
the OFF position.
Setting Station Run Times
1. Turn the dial to RUN TIMES position.
2. The display will show the last
program selected (A, B, or C), the
station number selected, icon,
and the station will be flashing. You
can switch to another program by
pressing the button.
3. Use the or button to change the station run time on
the display. You can set the run times from 0 to 4 hours.
4. Press the
button to advance to the next station.
Setting Days To Water
1. Turn the dial to the WATER DAYS
position.
2. The display will show the last program
selected (A, B, or C). You can switch to another program
by pressing the button.
3. The controller will display the seven days of the week (MO,
TU, WE, TH, FR, SA, SU). Each day will have a icon or
a icon above the day. The icon would represent an
“On” water day, while a icon would represent an “Off”
watering day.
PROGRAMMING THE CONTROLLER
START TIMES
RUN TIMES
WATER DAYS
Even
2, 4,...30
Odd Day Watering
Even Day Watering
SuSuMoMo TuTu WeWe ThTh FrFr SaSa

ENG
10
Automatic Watering
After programming the XC, set the dial to the
RUN position to enable automatic execution of all
selected watering programs and start times.
System Off
Valves currently watering will be shut off after
the dial is turned to the SYSTEM OFF position
for two seconds. All active programs are dis-
continued and watering is stopped. To return
the controller to normal automatic operation,
simply return the dial to the RUN position.
Programmable Rain Off
This feature permits the user to stop all
programmed waterings for a designated
period from 1 to 7 days. At the end of the
programmed rain off period, the controller
will resume normal automatic operation.
1. Turn the dial to the SYSTEM OFF
position. Wait for OFF to be displayed.
2. Press the button as many times as needed
to set the number of days off (up to 7 days).
3. Turn the dial back to the RUN position at which
OFF, a number, the and icons will be
displayed.
The days off remaining will decrease at
midnight each day. When it goes to zero,
the display will show normal time of day
and normal irrigation will resume at the
next scheduled start time.
Selecting Interval Watering
With this option you can select interval
watering from 1 to 31 days.
1. With the cursor on EVEN, press the
button once and
the
icon will appear and a 1 flashing in the display.
Interval watering schedule appears on the display.
2. Press the or button to select the number of days
between watering days (from 1 to 31 days). This is called the
interval.
The controller will water the selected program at the next start
time and will then water at the interval programmed.
Setting Event Day(s) Off
The XC allows you to program a No Water Day(s). This feature is
useful to inhibit watering on specific day(s). For example, if you
always mow the lawn on Saturdays, you would designate Saturday
as a No Water Day so that you are not mowing wet grass.
1. Turn the dial to the WATER DAYS position.
2. Enter an interval watering schedule as described on page 10.
3. Press the button to scroll to the NO WATER DAYS at the
bottom of the display. MO will be flashing.
4. Use the button until the cursor is at the day of the week
you wish to set as a No Water Day.
5. Press the button to set this day as a no water day. The
will illuminate over this day.
6. Repeat steps 4 and 5 until all desired event day(s) are off.
NOTE: You also have the option in the interval
watering schedule to program Odd or Even days
off.
PROGRAMMING THE CONTROLLER
SYSTEM OFF
RUN
RUN
SYSTEM OFF

11
ENG
Manually Run All Stations
ALL
1. Turn dial to MANUAL – ALL
STATIONS position.
2. Select program A, B, or C by
pressing the button.
3. Station run time will flash in the display. Use the or
button to select the amount of time for a station to water
if different from the run time displayed.
4. Use the button to move to the next station.
5. Repeat steps 3 and 4 to customize each station.
6. Press the button until you reach the station at which you
would like watering to begin.
Turn the dial clockwise to the RUN position (the controller will
water the entire program beginning with the station number
last left in the display, then return to the automatic mode with
no change in the previously set program).
One Touch Manual Start and Advance
You can also activate all stations to water without using the dial.
1. Hold down the button for 2 seconds.
2. This feature automatically defaults to program A. You can
select program B or C by pressing the button.
3. The station number will be flashing. Press the button to
scroll through the stations and use the or button to
adjust station run times. (If no buttons are pressed for a
few seconds during step 2 or 3, the controller will auto-
matically begin watering).
4. Press the button scroll to the station you wish to begin
with. After a 2 second pause, the program will begin. At
any time during the manual cycle, you can use the
or
buttons to navigate from station to station manually.
Seasonal Adjustment
Seasonal Adjust is used to make global
run time changes without re-program-
ming the entire controller. To use the
seasonal adjustment feature:
1. Turn the dial to the SEASONAL
ADJUSTMENT position.
2. The display will now show a flashing number followed by
a %, as well as the bar graph which always remains on the
display. Press the or button to adjust the percentage
of the seasonal adjustment. Each bar on the graph
represents 10%. This feature can adjust the controller from
10% to 150% of the original program.
To view the adjusted run times, simply turn the dial to the
RUN TIMES position, the displayed run time will be updated
accordingly as the seasonal adjustment is made.
NOTE: The controller should always be initially
programmed in the 100% position.
Manually Run a Single Station
1
1. Turn dial to MANUAL – ONE
STATION position.
2. Station run time will flash in the
display. Use the button to move to the desired station.
You may use the or button to select the amount of
time for a station to water.
3. Turn the dial clockwise to the RUN position to run the
station (only the designated station will water, then the
controller will return to automatic mode with no change
to the previously set program). Also see One Touch Start
and Advance.
PROGRAMMING THE CONTROLLER
MANUAL-ONE STATION 1
MANUAL-ALL STATIONS ALL
SEASONAL ADJUSTMENT

ENG
12
ADVANCED FEATURES
Test Program of All Stations
The XC allows the user a simplified method for running a test
program. This feature will operate each station in numerical
sequence, from the lowest to the highest.
1. With the dial in the RUN position, press and hold the
button. The station number will be displayed and the time
will be flashing.
2. Use the or buttons to set the run time from 1 to 15
minutes. The run time needs to be entered only once.
3. After a 2 second pause, the test program will start.
Programmable Sensor Override
The XC allows the user to program the controller so that
the sensor disables watering on only desired stations. For
example, patio gardens that have pots under overhangs and
roofs may not receive water when it rains and will continue to
need to be watered during periods of rain. To program sensor
override:
1. Turn the dial to the RUN position.
2. Press and hold the button down while turning
the dial to START TIMES position.
3. Release the button. At this point, the
display will show the station number, ON,
and the icon, will be flashing.
4. Press the or button to enable or
disable the sensor for the station shown.
ON = Sensor enabled (will suspend
irrigation)
OFF = Sensor disabled (will allow watering)
5. Use the or buttons to scroll to the next
station that you would like to program the sensor override.
NOTE: The controller default is for the sensor to
disable watering on all zones when rain occurs.
When the XC receives an input from the
sensor to disable watering, the display
will indicate those stations that have been
programmed to override the sensor. A
station that is running in the sensor override mode will flash
the and icons alternately.
Sensor Enable
Sensor Disabled
RUN

13
ENG
Easy Retrieve™Program Memory
The XC is capable of saving the preferred watering program
into memory for retrieval at a later time. This feature allows
for a quick way of resetting the controller to the original
programmed watering schedule.
To save the program into the memory
1. With the dial in the RUN position, press and hold the
and buttons for 5 seconds. The display will scroll three
segments from left to right across the display indicating
the program is being saved into memory.
2. Release the and buttons.
To retrieve a program that was previously saved into
memory.
1. With the dial in the RUN position, press and hold the
and buttons for 5 seconds. The display will scroll three
segments from right to left across the display indicating
the program is being saved into memory.
2. Release the and buttons.
Programmable Delay Between Stations
This feature allows the user to insert a delay between stations
between when one station turns off and the next one turns on.
1. Start with the dial in the RUN position.
2. Press and hold the button down while turning the dial
to the RUN TIMES position.
3. Release the button. At this point the display will show
a delay time for all stations in seconds, which will be
flashing.
4. Press the or buttons to increase or decrease the
delay time between 20 seconds and 4 hours.
5. Return the dial to the RUN position.
Clearing the Controller's Memory/Resetting the
Controller
If you feel you have misprogrammed the controller, there is a
process that will reset the memory to the factory defaults and
erase all programs and data that have been entered into the
controller.
1. Press and hold down the button.
2. Press and release the reset button in the lower
wiring compartment.
3. Wait 2 seconds and release the button. The display
should now show 12:00 AM. All the memory has been
cleared and the controller may now be reprogrammed.
ADVANCED FEATURES

ENG
14
TROUBLESHOOTING GUIDE
PROBLEM CAUSES SOLUTIONS
The controller is continuously
watering
Too many start times have been
programmed
Only one start time is necessary to activate a
program. (refer to "Setting the Program Start
Time(s)" on page 8)
There is no display Check batteries or AC power Correct any errors
Display reads “Off, ” The rain sensor is interrupting
irrigation or the sensor jumper has
been removed
Slide the rain sensor bypass switch to the BYPASS
position to bypass the rain sensor circuit, or
reinstall the jumper
Rain sensor will not shut off the
system
Defective rain sensor
Jumper was not removed when
sensor was installed
Stations have been programmed to
override the sensor
Verify operation of rain sensor and proper wiring
Remove jumper from the sensor terminals
Reprogram the sensor override to enable the
sensor (refer to "Programmable Sensor Override"
on page 12)
Frozen display, or showing
incorrect information
Power surge Reset the controller (refer to "Clearing the Control-
ler's Memory/Resetting the Controller" on page
13)
Display shows a station is running
but the and icons are flashing
The sensor is interrupting irrigation,
however the station has been
programmed to override the sensor
Check the Programmable Sensor Override status
(refer to "Programmable Sensor Override" on page
12)
Automatic irrigation does not start
at the start time and controller is
not in the System Off mode
AM/PM of time of day not set correctly
AM/PM of start time not set correctly
Start Time is disabled (set for Off)
Batteries are dead
Controller is not receiving AC power
(if using a transformer)
Correct AM/PM of time of day
Correct AM/PM of start time
Refer to "Setting the Program Start Time(s)" on p 8
Replace batteries
Check AC power connections

15
ENG
SPECIFICATIONS
Electrical Specications
• Electronicshortcircuitprotection
• SixAA(1.5V)alkalinebatteriesrequired
• Non-volatilememoryforprogramdata
• ModelXCH-x00hasanIP2XRating
• Cleanonlywithaclothdampenedwith
mild soap and water
Explanation of Symbols
= AC
= Consult Documentation
= Ground
Operating Specications
• StationRunTimes:0to4hoursin
1-minute increments
• 3IndependentWateringPrograms
• StartTimes:4perdayperprogramfor
up to 12 daily starts
• WateringSchedule:365-daycalendar,
interval watering, odd/even watering
• AM/PM,24-hourclock
• Simplemanualoperation
• Sensoroverridebystation
• Programmableraindelay(1to7days)
• Seasonaladjustment(10%to150%)
• Sensorbypassswitch
• XCH-x00andXCHM-x00foroutdooruse
• Sealevelto2000mat0-50°C

ENG
16
CERTIFICATE OF CONFORMITY TO EUROPEAN DIRECTIVES
This product should not be used for anything other than what is described in this document. This product should only be serviced
by trained and authorized personnel.
FCC part 15:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Hunter Industries declares that the irrigation controller Model XCH complies with the standards of the European Directives of “elec-
tromagnetic compatibility” 87/336/EEC and “low voltage” 73/23/EEC.
__________________________________
Project Engineer

Hunter Industries Incorporated • The Irrigation Innovators © 2012 Hunter Industries Incorporated
1940DiamondStreet•SanMarcos,California92078 LIT-467 B 5/12
www.hunterindustries.com