SIP-6002 User Guide
8
At bottom of the pager:
Click “Save Changes” button to apply all the changes.
3.2.3 If your IP Phone is connected to the Internet directly, your IP phone’s IP
address will most likely be public IP address. Your setting should be,
Under User Account Setup:
Set“User ID”to the number provided by your service provider. If you use
FWD, here you can put your FWD number e.g. 180000.
Set “Password” to the password provided by your service provider.
Under Proxy Server Setup:
Set “Proxy” to the SIP proxy server IP address or domain name. In FWD case,
it is “fwd.pulver.com”.
At bottom of the pager:
Click “Save Changes” button to apply all the changes.
3.3 Call features
Name Code Description
--------------------------------------------------------------------------------------------------
Call forward *31 forward all calls to the target specified after
the activation code.
Example:
A with number 1000, B with number 2000,
pick up A, key in *312000, then hang up.
when number 1000 is called, B rings instead
of A. This will stay until someone picks up
A, then key in *32.
----------------------------------------------------------------------------------------------------
Cancel call forward *32 cancel call forward code
----------------------------------------------------------------------------------------------------
Call transfer None example: A call B, B transfer A’s call to C.
1)A dial B’s number.
2)B answer, then click hang up hook. After
head a dial tone, key in C’s number.
3)After C answers the phone, B hang up,
A’s call will transfer to C.
----------------------------------------------------------------------------------------------------
Three way conference None example: A call B and C for conference.
1)A dial B’s number.
