HYGEAR GEAR GO User manual

GEAR GO
User manual

Connected Home Gym
18 lbs
1.688 lbs
Function
Band material
Max user weight
Capacity
Safeguards
3.7V
Water
resistance
Input port
DC input
Charge Time*
(0-100%)
Bluetooth
version
Bluetooth
physical
range
5V
Connectivity
Dimensions
Battery Life
Product weight
Frequency
2

GEAR GO?
STRENGTH. FITNESS. FAST.
Get a full body workout anytime, anywhere with personalized training to hit your fitness goals.
GEAR GO is lightweight, portable, and easy to anchor to any door for a customized workout
experience based on your own workout performance.
Build lean muscle
Develop full body strength
Enhance endurance
Follow personalized workouts
Use indoors or outdoors
3

What’s In the Box GEAR GO
4
1:
2:
3: Handles
4: USB Cable
5: Carrying bag
2
1
3
5
6
4
Resistance bands with Sensor
Door anchor
6: Door Hanger - “Workout in Progress”
WORKOUT
IN
PROGRESS

How to Connect to the HYGEAR App
5
1. Scan the QR code to download the HYGEAR App
2. Make sure Bluetooth and location services are enabled
3. Open the HYGEAR app and follow the instructions to connect
your GEAR GO and create your HYGEAR account
4. To turn on the GEAR GO and press the button on your sensor unit
once to wake sensor. Red and blue lights will start flashing
5. The app will connect automatically. If your band does not
connect successfully, shut down the app, re-open, and try again.
40
PAC E
Total Reps
301
24
274
15:42
801
36
Total Weight
Total Calories
Training Time
Total Work Done
J
RPM
MIN
KG
Avg. Pace

Door Anchor Setup
6
with the Door Anchor
For a high anchor, place the Door Anchor
inside the top of the door
For a middle anchor, place the Door Anchor
above the door lock
For a low anchor, place the Door Anchor under
the door
Clip the carabiner on the GEAR GO to
the Door Anchor
Always close the door securely.

7
Assemble
Connect the sensor unit to
the door anchor.
1. Attach the handles to the
carabiners at the end of
each band.
2.

Important Safety Information for Door Anchoring
8
Only use the GEAR GO Door Anchor with professionally constructed doors that
can fully support your body weight.
It is safest and most secure to place the Door Anchor so that you pull, rather than push, the door closed.
That way, the door is less likely to open into you while you’re exercising.
When using any hinge-style door, always ensure it’s completely closed before starting your workout.
Check that the door is fully closed and secured by pushing or pulling it before starting your workout.
For additional safety, use a door that locks.
To avoid injury, always place the door sign, ‘Workout in Progress - Do Not Open’ on the opposite
side of the door before starting your workout.
WARNING: DO NOT use GEAR GO on glass doors, sliding doors, or any lightweight doors such as
closets or kitchen cabinets.

Standing Row
9
Tricep Extension (press downs) Chest Press
Exercise Examples

DO start slowly and take it easy before progressing to a more challenging or intense workout.
DO set your own limits and be responsible for your own safety.
DO check that you have attached the product properly and the bands are secure.
DO use a strong and secure anchoring point.
DO always perform a weight test by pulling hard on the anchor and handles once the
product is anchored in place.
As with any exercise equipment, it is essential to be mindful of your personal safety.
10
Safety: Do’s and Dont’s
DO inspect the resistance bands for holes, tears or cracks before starting your workout.
DO ensure the carabiners are correctly attached to the GEAR GO.
DO choose the right workout program for your fitness level and stay in control.

11
Dont’s
DO use GEAR GO only for its intended use, as described in this manual.
DO make sure the floor is not wet or slipppery to avoid minor or even severe injuries.
DO inspect your GEAR GO and all its components before each use
DO replace any damaged or worn components immediately.
DON’T continue exercising you feel pain or discomfort.
DON’T use GEAR GO if your hands are greasy, wet or overly sweaty.
DON’T push yourself too far beyond your comfort zone.
DON’T use GEAR GO if a band or any other element is damaged.
DON’T allow children under the age of 16 to use GEAR GO.
Safety: Do’s and Dont’s

DON’T touch GEAR GO or the power plug with wet hands.
DON’T bend or yank the plug or power cord from the electrical outlet.
DON’T use GEAR GO if any of the components are worn or damaged.
DON’T use an anchoring point that causes excessive friction or wear to the GEAR GO.
DON’T expose your GEAR GO to high temperatures.
12
DON’T expose GEAR GO to direct sunlight, rain or snow.
DON’T leave GEAR GO exposed outdoors for an extended period of time.
DON’T use strong chemical agents or cleaners, which may discolor or damage your GEAR GO.
DON’T download and install any firmware from an unauthorized provider. This may cause GEAR GO
to malfunction or become incompatible, which would void the product warranty.
Safety: Do’s and Dont’s

13
Failure to adhere to GEAR GO safety guidelines may result in minor or severe injury.
The user assumes the full risk of injury and all liability resulting from the use of GEAR GO
and all of its components.
Console your doctor before using the GEAR GO
Safety: Do’s and Dont’s

14
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the part responsible for compliance could void
the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement Caution: This equipment complies with FCC exposure limits set
forth for an uncontrolled environment.
FCC Statement
FCC Caution

15
"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help."
FCC ID:2AV6I-HY100
FCC Caution

EN
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment.
IC:26027-HY100
16
IC Statement

FR
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour
unenvironnement non contrôlé.
17
IC Statement

PN:DOC-HYD0002.V6