Hyper Tough HT19-401-003-22 User manual

HT19-401-003-22
CHARGING PROCEDURE INSTALLING THE BATTERY PACK
Cordless Sprayer
2 3
1
2. TO INSTALL THE BATTERY PACK
After recharging, insert the battery pack into the
battery port. A simple push and
slight pressure will be sufficient until a click is heard.
Check to see if the battery is fully secured.
BEFORE PUTTING INTO OPERATION
3. CONNECTING THE LANCE TO THE HANDLE
1) Insert the lance into the handle as shown.
2) Thread the cap onto the handle and tighten
securely.
1
2
1
2
20 VOLT MAX
1. CHARGING YOUR BATTERY PACK
Connect the battery charger to the power supply and
the indicator light should turn to green. Then, slide the
charger base on the battery pack to make connections
and the indicator light will turn red to show that the
charging has started. It will remain red until the battery
is fully charged.

HT19-401-003-22
Cordless Sprayer
4 5 6
BEFORE PUTTING INTO OPERATION
4. Loosen the nut (a) to extend the lance to the desired
position, and tighten the nut (a) again.
12
a
OPERATION
6. SPRAYING HOME AND GARDEN CHEMICALS
The sprayer may be operated with the handle resting in
the handle storage area or you may remove and hold
the handle. Aim the sprayer nozzle directly at the plants
or objects you wish to spray.
OPERATION
5.To release the lock-on, depress the trigger and slide
it backward.
20 VOLT MAX