HYSEN HY607 User manual

WIFI Digital Heating Thermostat User Manual
Many thanks for your selection of our products and services, and also for your trust and
support to us.
Search for "Smart RM" or “Smart
Life” Download the Wifi App with
the following icon
Turn on the thermostat, press and hold the
key combination and Activate
WIFI distribution network icon
Kindly remind :you should press any key to awake thermostat before setting
Features
Appearance
(1) Standard total Size is 86*86mm (5) hidden box and 60mm European box
(2) Touch buttons to make simple operation (6) Display size : 64*64mm
(3) The visible thickness above the wall is only 15mm86mm (7) Color:white
Functions
(A) Including built-in sensor and external sensor
(B) 0.5°C accuracy keeps temperature within the level you set.
(C) Children lock to prevent misoperation by children
(D) Data memory when power is off.
(E) Holiday mode make you enjoy more comfortable temperature in holiday
(F) The temperature of external sensor can be checked
Product Specifications
☆Power: 90-240Vac 50/60HZ ☆Range of temperature display:：0~40°C
☆Display accuracy:：0.5°C ☆Insulating condition: Normal environment
☆Probe sensor:：NTC(10k)1% ☆Running program: Set per 1 week as a cycle
☆Contact capacity:：3A/250V(WW);16A/250V(WE) ☆Output: Switch relay
☆Working environment temperature:：0~90°C ☆Installation: Wall mounted or on battery seat
☆Range of temperature adjustment:：5~35°C ☆Size(mm)：86*86*27
Before wiring and installing
1. Read these instructions carefully. Failure to follow them could damage the product or cause a
hazardous condition.
2. Check the ratings given in the instructions and on the product to make sure the produce is suitable
for your application.
3. Installer must be a trained experienced service technician.
4. After installation is complete.check out produce operation as provided in these instructions
CAUTION
Electrical shock or equipment Damage Hazard. or short equipment circuitry.
Disconnect power supply before installation
Wiring Diagram
Electric heating wiring diagram Water heating wiring diagram
(do not connect terminal "close 4" of electric valve)
Water heating and gas wall-hung boiler heating,
no contact wiring diagram,(disconnection when electric valve close)
Note:3 & 4 connect with power, 5 & 6 connect with gas boiler,if closed
type thermal actuator ,then connect 1&3,if open type thermal
actuator ,then connect 2&3
Displays
Description of icon
Auto mode;run preset program Manual mode
Temporary manual mode Clock
Holiday mode, Holiday days and temperature can be set to run in countdown mode
Heating,,icon disappears to stop heating EXT :External NTC sensor
WIFI connection, flashing EZ distribution mode Child lock
Cloud icon: flashing AP distribution network mode Open window
Operation key
NO
symbols
represent
A
Turn ON/OFF:Short press to turn on/ turn off
B
1 Short press to switch automatic mode and manual mode
2 Turn on thermostat, long press for 3-5 seconds to enter into programmable
setting
3. Turn off thermostat, long press for 3-5 seconds to enter into advanced A setting
C
1 Confirm key: use it with key
2 Only short press it to set time

3 Turn on thermostat,long press it for 3-5seconds to holiday mode setting. Appear
OFF, press or change to ON,then press to confirm opening holiday mode
4 Turn off thermostat ,long press to enter into advanced B setting
B
1 Decrease key
2 Long press to lock /unlock
D
1 Increase key :
2 Long press to inquire external sensor temperature
3 In the Auto model, press or enter to temporary manual mode
Programmable
5+2 (factory default),6+1 and 7 models 6 times period setting for user choose. In the advanced options
choose model of you need, under power on state, long press for 3-5 seconds enter into programming
mode setting, then short press choose: hour,minute, time period, and press and to adjust
data, finished setting, about 10 seconds will automatic save and exist.
1
2
3
4
5
6
Wake up
Out door
Back home
Out door
Back home
Sleep
6：00
20℃
8：00
15℃
11：30
15℃
13：30
15℃
17：00
15℃
22：00
15℃
The optimum comfort temperature is 18℃-22℃.
Advanced options A
Under turn off state, long press for 3-5 seconds to access advanced A setting.
From A1 to AE, short press to choose the option, and adjust data by , , short press to switch
next option.Remain about 5 seconds after finish setting will quit setting.
NO
Setting Options
Data Setting Function
Factory Default
A1
Measure Temperature
Calibration
-9-+9℃
0.5℃Accuracy
Calibration
A2
Temperature control
return difference setting
0.5-2.5℃
1℃
A3
Children lock setting
0:half lock 1:full lock
0
A4
Power with memory
function
0:Power with memory function
1:Shutdown power after power off
2:Shutdown power after power on
0
A5
Backlight sleep brightness
0: 0% of brightness
1: 50% of brightness
2: 100% of brightness
1
A6
Weekly programming
selection
0: 5+2 1:6+1 2 :7
0
A7
Setting temperature
lowest limit
1-10℃
5℃
A8
Setting temperature
highest Limit
20-70℃
35℃
A9
Protection of low
temperature
1 :1-10℃
2:Exceed 10℃, screen display【--】,Low
temperature protection was cancelled.
5
AA
Protection of high
temperature
1::35-70℃
2: low than 35 ℃, screen display 【-- 】,high
temperature protection was canceled
45
AB
Return different for high
temperature protection
1-9
2
AC
Running temperature of
open window function
1:10-20℃
2: low 10℃,screen display 【--】,open window
function was canceled
15
AD
Running time of open
window function
10-20 min
10
AE
Reset
Long press until whole display
Advanced options B
Under turn off state, long press for 3-5 seconds to access advanced B setting
NO.
Setting Options
Data Setting Function
Factory Default
BN
Choose sensor
N1: only inner sensor
N2: only external sensor
N3: both sensor
N1
BC
Descaling function
0: closed 1: open
0
BO
version
V1.0
1.0
Return difference : limit valve of external sensor is 45℃for factory default (A6),value of external
sensor control return difference (A3) is 2. when temperature rise to 45℃,then relay stop working and will
remind high temperature production alarm. If temperature decline to 43℃relay continue to work and
heating alarm will be relieved. (it can be operated ,only when indoor temperature is lower than setting
temperature )
Sensor fault display:please choose correct working way of built-in and external sensor, if choose
wrongly or sensor fault (breakdown), “E1”or “E2”will be displayed on the screen. Thermostat will stop
heating until the fault is eliminated
Warranty：
We offer the warranty of 18 months, from the sales day. The products of our company can have lifetime
warranty ,if it is not the quality problems, or beyond the warranty period, we will charge for the after-sale
service.