Hyundai HPS-300 User manual

POWER
STATION
HPS-300/600/1100/1600
USER MANUAL HPS-300/600/1100/1600
For Your Safety
Read and understand this manual before use.
Keep this manual for future reference.

We are still constantly improving this power station, therefore, some parts of this power station may be
changed in order to achieve the better quality, but the main functions and operations will not be alternated
and changed. Your understanding would be greatly appreciated.
HPS-300/600/1100/1600

HYUNDAI 01
Table of Contents
SAFETY .................................................................................................................................................................
GENERAL DESCRIPTION .....................................................................................................................................
MAIN PARAMETERS ............................................................................................................................................
OPERATION CONTROL AND DESCRIPTION .....................................................................................................
OPERATION ..........................................................................................................................................................
STORAGE AND DOWNTIME MAINTENANCE .....................................................................................................
2
3
4
5
6
10

HPS-300/600/1100/1600
02
1. SAFETY
Please pay attention to the following before using this product, otherwise it may damage your electronic
devices or cause a danger. To avoid fire or electrical shock hazard, observe all ratings on unit and products
you intend to use.
1) Rechargeable Lithium-iron-phosphate (LiFePO4) battery is equipped with this product so take
particular attention on operation, storage and delivery.
2) Recharge only with the charger specified by the manufacturer. A non-specified charger may create a risk of
fire.
3) Charge it in a ventilated location; do not put this product in water and do not throw or beat this product.
4) Keep this product and related accessories in a safe place, which is not accessible to children. Do not
expose it to sources of ignition or other heat sources to avoid danger.
5) Avoid touching the charging/discharging socket with the metal objects. Otherwise will cause a short circuit
and injured.
6) Inadequate ventilation may cause damage to the unit. Do not put anything on top of the unit.
7) Do not disassemble the appliance and do not use it when the temperature is above 40 degrees.
8) Inspect the unit for dirt, dust, or moisture on a regular basis.
9) Do not insert any objects into output port or ventilation holes.
10) Any repair must be carried out by the manufacturer or an authorized repair agent in order to avoid danger.
Do not attempt to replace the internal battery. It shall be done by a qualified service center.
11) Do not insert any conductors into output port deliberately.

HYUNDAI 03
2. GENERAL DESCRIPTION
This power station is made of rechargeable Lithium-iron-phosphate (LiFePO4) battery, inverter circuit
and battery management system (BMS). It supports AC&DC input charging by power source.
* Scope of application
USB Port: Smart phone, MP3 Player, Digital Camera, Tablet, E-reader, etc.
DC 12V Output Ports: LED lamp, etc.
DC 12V Cigarette Port: 12V appliances, etc.
AC Output Port: Electric appliances such as Televisions, Laptops, Cooker, etc.
* Electric appliances which you intend to use must be less than the device’s continuous output power.
(HPS-300: 300W / HPS-600: 500W / HPS-1100: 1000W / HPS-1600: 1500W)

HPS-300/600/1100/1600
04
3. MAIN PARAMETERS
Model HPS-300 HPS-600 HPS-1100 HPS-1600
Capacity 24Ah (12.8V) 20Ah (25.6V) 40.5Ah (25.6V) 58.5Ah (25.6V)
Battery type Lithium-iron-phosphate (LiFePO4)
AC output Port 230/240V, 50Hz, Pure sine wave output (2×AC Port)
Continue power 300W 500W 1000W 1500W
Peak power 600W 1000W 2000W 3000W
4*USB output 5V/2A, 9V/2A, 12V/1.5A
1*Type-C Port 5-20V,
PD 60W Max 5-20V, PD 100W Max
2*DC 12V Port 12V/5A
EC5 port DC12-14.4V
80A(MAX) DC12.8V 10A
1*DC 12V Cigarrette plug 12V/10A
Charging ways Wall &solar charging
Charging Input DC 12-30V 120W
(MAX) MPPT DC 12-30V 200W (MAX) MPPT
Operation temperature 0~45°C
Product size (L*W*H mm) 250*190*230 250*190*230 385*190*230 480*190*230
Weight 6.7Kg 8.2Kg 14.9Kg 19.8Kg
Package Color box
Power station 1EA
Exclusive charger 1EA
Instruction manual 1EA
Solar charger Optional
Smart Jumper Clamp Optional
* List of contents

HYUNDAI 05
4. OPERATION CONTROL AND DESCRIPTION
1DC ON/OFF status
2AC/Solar charging indicator
3Battery display
4AC output power
5Operating time
6AC ON/OFF status
7TYPE-C output port
8USB output port
9AC output port
10 DC 12V cigarette port
11 DC ON/OFF
12 Power Switch
13 Power-on indicator
14 AC ON/OFF
15 Ventilation Hole
16 USB output port
17 DC 12V output port
18 EC5 port
19 Cooling fan
20 * DC Input 1 (7909)
21 ** DC Input 2 (5521)
FRONT
BACK
05
09
20
17
21
10
18
07 15
19
08 16
04
03 13
12
02
01 11
06 14
* Connect a power adapter
** Connect a cable from solar charger

HPS-300/600/1100/160006
5. OPERATION
1) Using power station
a. Press power switch (12) to turn on the power station, then LCD indicator (13) will be launched.
b. Press AC ON/OFF (14) button to turn it on, AC ON character (6) will display.
c. Connect one end of the cable to the AC socket (9) and the other end of it to your electric appliances
after 3 seconds from AC function turned on.
d. Press AC ON/OFF button (14) again to turn it off when you stop to use it, and AC OFF character (6)
will display.
e. Press DC ON/OFF button (11) to turn it on, DC character (1) will display.
f. Connect one end of the cable to any DC port like USB-A (8), Type-C (7), DC round port (16) or car
cigarette port (17), and connect the other end of cable to your mobile phone, Laptop, Drone or other
digital electronic equipment.
g. Press DC ON/OFF button (11) again to turn it off when you stop to use it, and DC OFF character (1)
will display.
* How to know if your electronic devices will work with the power station?
First, you need to determine the amount of power your electronic device requires. This may require some
research by yourself, examining the user guide for your electronic device should suffice.Second, you
will need to check the capacity for the individual output ports. For example, the AC port of HPS-600 is
monitored by an inverter that allows for 500W of continuous power. This means if your devic is a pulling
more than 500W for an extended period of time, the portable power supply will shut off.
WARNING :
Please do not insert any conductors into output port deliberately.
NOTE:
1. When the power is lower than 1%, both AC and DC stop to work, turn off the power switch to protect
batteries from being damaged by loss of power.
2. When the power is lower than or equal to 10%, the battery level symbol is turned to red from green.
3. When the power level is lower than or equal to 5%, the battery level symbol flashes in red.
4. If possible, keep your power station fully charged before long-term downtime. (Please fully recharge your
power station in every 6 months at least for long-term usage)

HYUNDAI 07
2) Charging power station
a. Charging with AC cable (Max charging power : HPS-300 : 120W / HPS-600/1100/1600 : 200W)
Plug the charging cable into wall outlet, then connect the other side to the DC Input port 1 (20, DC
7909) of the power station, you can see the charging state from the LCD display (2).
b. Charging with solar charger (Max charging power : HPS-300 : 120W / HPS-600/1100/1600 : 200W)
* Solar charger is optional
- Place your solar charger where it can get as much direct sunlight as possible.
- Connect the solar charger by solar charging cable, then insert the plug of the cable into the DC Input
port 2 (21, DC 5521) on the back side of the portable power station. You can know the charging
state from the LCD display (2).
- It will stop charging when the battery is full of energy.
NOTE:
1. For wall charging, recharge only with the charger specified by the manufacturer.
2. Solar charging will be halted automatically for the protection of solar charger during the night when there
is no light. In order to resume solar charging, please disconnect and re-connect the solar charger.
3. For solar charging, it is recommended to use HYUNDAI solar charger or unless must use solar charger
as following specification.
a. Connector : DC 5521 male connector
b. Charging type
• MPPT Charging type
• DC output : 12~30V (Output voltage of 24V will be better)
4. Additional controllers are not required whether charging the power station by PWM or MPPT type solar charger.
5. AC charging and solar charging are not available at the same time.
Charge from Wall outlet
Solar Panel
Solar Charger

HPS-300/600/1100/160008
3) EC5 Port
a. The power station has enough power to assist start a vehicle's engine, while before using the EC5 ,
please make sure the remaining battery capacity is at least 60%.
b. Connect the positive and negative polarities of the battery clamps to the positive and the negative
polarities of car battery (Red to +, black to -).
c. Turn the car key to start it up.
d. Disconnect the clamps with battery and the jumping port of your power station.
NOTE:
Make sure the gas engine displacement of the vehicle is less than 4L.
1. Make sure the battery power is over 60%
2. Make sure the battery clamps is not broken.
3. Before starting, make sure the red and black clips are clamped tightly to the battery poles of your car,
keep the two clips with enough safety distance, to prevent the two from falling off or collision because of
the engine vibration after car starting.
4. It is strictly prohibited to connect the red and black clip directly, otherwise it may cause accidents.
5. Please keep away from the engine when starting the car to avoid any physical injury that may cause by
car engine running.
6. Please remove the product from battery within 30 seconds after engine started, otherwise it might cause
damage to the portable power supply or even cause accident
7. People who are not familiar with this product (especially children) is strictly prohibited to use this
function.
8. Please remove all personal jewelry, such as rings, bracelets, necklaces, and watches before jump
starting.
Car battery

HYUNDAI 09
4) Alarm information description
a. Overload
When the using output power is more than specific output power which the model can be applied, the
alarm area will display “OVERLOAD”. It is necessary to reduce the power of the electronic devices. If
the AC output is turned off at this time, Press the AC ON/OFF button again and restart.
b. High temperature
When the internal temperature is higher than 35 degrees Celsius or the output power is greater than
200W, the cooling fan starts to work. When the internal temperature is higher than 80 degrees Celsius,
the temperature alarm starts. The AC and DC outputs are off and the alarm area shows “HI TEMP”,
which will stop working at once. You need to wait until the temperature drops below 40 degrees
Celsius to restart.

HPS-300/600/1100/160010
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
6. STORAGE AND DOWNTIME MAINTENANCE
Failure to maintain your power station by following steps can result in battery damage.
1. Please charge your power station before storage and fully recharge it every 6 months at least.
Store it in a cool and dry place.
2. If the main power supply shuts down automatically because of lower battery capacity,
please recharge it within 3 months. Otherwise, the battery capacity won’t be recovered.
NOTE:
Cold temperatures (below freezing) can impact the battery capacity of the power station.
If you are living in sub-zero conditions, you can drain power from it. Never charge it in the sub-zero
conditions, which will damage the lithium-ion battery and battery capacity may not be recovered

POWER STATION HYUNDAI
EC
Declaration of
Conformity 2021
General Manager
Inseok Jeong
We :
Date : 2021.07.01
HYUNDAI Corporation
25, Yulgok-ro 2-gil, Jongno-gu, Seoul 03143 Korea
Declare that the product detailed below :
POWER STATION
MODEL : HPS-300, HPS-600, HPS-1100, HPS-1600
Satisfies the requirements of the Council Directives :
Low voltage directive 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
ROHS Directive 2011/65/EU & (EU) 2015/863
and conform with the norms :
EN 55032: 2015+A11: 2020
EN 55035: 2017+A11: 2020
EN 61000-3-2: 2019
EN 61000-3-3: 2013+A1: 2019

HYUNDAI Corporation
25, Yulgok-ro 2-gil, Jongno-gu,
Seoul 03143, Korea,
Post Code : 03143
82 2 390 1114
www.hyundaicorp.com
Copyright HYUNDAI Corporation All rights reserved.
Made in P.R.C
+