I-Tech NVIP117 Series User manual

Rev. : 1.0
P.3
4.PackageContents
Before Unpacking
It isvery importanttolocatetheLCD KeyboardDrawerinasuitableenvironment.
The surfaceforplacingand fixing the LCDKeyboardDrawershouldbe stableandlevel
ormounted intoasuitablecabinet.
Makesurethe placehasgood ventilation,isout ofdirect sunlight, awayfromsourcesof
excessivedust, dirt,heat, water,moistureand vibration.
Convenienceforconnecting the LCD KeyboardDrawertothe related facilitiesshouldbe
well considerstoo.
Unpacking
The LCD KeyboardDrawercomeswiththe standardpartsshownasabove. Checkand make
suretheyareincluded and ingood condition.Ifanything ismissing,ordamage,contactthe
supplierimmediately.
LCDMonitorDrawerwithIPKVMSwitch1Piece
UserManual1Piece
DCPowerAdapter1Piece
PowerCord1Piece
Mounting Bracket1Pair
Fasteners4Pieces
CD-63-in-1KVMcable8Pieces
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.4
5.OptionalAccessories
6.PeripheralProducts
RKP115 / RKP117 / RKP119UserManual
ModelDescription
CV-4014-PortPS/2KVMswitch
CV-8018-PortPS/2KVMswitch
CV-1601 16-Port PS/2KVMswitch
IP-8028-PortIPKVMswitch
IP-160216-PortIPKVMswitch
CV-101CAT.5PS/2KVMextender
CD-6/ 10/ 156ft/ 10ft /15ft PS/23-in-1cable
CA-2/ 6/10/ 152ft/ 6ft/ 10ft / 15ft PS/23-to-3cable
SUN-31SUN / iMACUSB toPS/2adapter
VideoInput
12V / 24V/ 48VDC PowerSupply
KVMCable
CascadeCable
Conversion Adapter
Others

Rev. : 1.0
P.5
Pleaseread allof theseinstructionscarefullybeforeyou usethe device.
Savethismanualforfuturereference.
UnplugtheLCD KeyboardDrawerfromthepoweroutletbeforecleaning.
Donotsprayliquidcleanersoraerosoldirectlyonthe device. Wetaclothwitha
neutraldetergent(e.g.cleanwater) andsqueezeittight,thencleanthescreen
slightlywithit.
DonotexposetheLCDKeyboardDrawerdirectlytorain,water,moistureor
sunlight.
Avoidpressureonthe LCD screentopreventpermanentdamagetothedisplay.
Donotattempttoservicethe deviceyourself. Improperoperationmayvoidyour
warranty. Referall servicingtoqualifiedservicepersonnel.
Safestorageenvironment oftheLCD KeyboardDrawerisrangingbetween 20oC
and60oC.Permanent damagecouldoccuriftheLCD KeyboardDrawerisstored
outside thesaferange.
UnplugtheLCDKeyboardDrawerimmediatelyandcallqualifiedservice
personnelunderthefollowingconditions:
1.Ifthe monitorhasbeen exposed torain,liquidorwater.
2.Ifthe monitorhasbeen dropped orthe casing hasbeendamaged.
Whatthewarrantydoes notcover
1.Anyproduct,onwhichtheserialnumberhasbeendefaced,modifiedor
removed.
2.Damage,deteriorationormalfunction resulting from:
a)Accident,misuse,neglect,fire,water,lightning,orotheractsofnature,
unauthorized productmodification,orfailuretofollowinstructionssupplied
withthe product.
b)Repairorattemptedrepairbyanyonenotauthorized byus.
c)Anydamageof theproductduetoshipment.
d)Removalorinstallationof the product.
e)Causesexternaltotheproduct, suchaselectricpowerfluctuation orfailure.
f)Useof suppliesorpartsnot meetingourspecifications.
g)Normalwearand tear.
h)Anyothercauseswhichdoesnotrelatetoaproduct defect.
3. Removal, installation, andset-upservicecharges.
7.Important Safeguards
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.6
8.StructureDiagram
1.PS/2keyboard
2.Aluminiumfrontpanel
3.Class AactivematrixTFT LCD panel
4.Rearmetalcase
5.LCD inverter
6.LCD membrane
7.Ball bearing telescopicslideswithstopper
8.Adjustablemountingbracket
9.OptionalKVMswitch
•‚ƒ„…
‡ˆ†‰
‰
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.10
LCD
Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.11
LCD MembraneDiagram
Left Right Exit
Menu/SelectionPower
MAINMENU
BRIGHT/CONTRAST
AUTOADJUST
PHASE/CLOCK
H/VPOSITION
MISC
RESET
MainMenu
Bright/ Contrast
Toenterintothe Bright, Blacklevel&Contrast sub-menu
AutoAdjust
Toperformautomaticoptimisationsof allfunctions
An “Adjusting”message isdisplayed duringthe process
Phase / Clock
Toenterintothe phase&clock sub menu
H/VPosition
Toenterintothe H/VPosition sub-menu
MISC
Toenterintothe MISCsub-menu
Reset
Reset tothedefaultfactorysettings
10.LCD Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.12
Bright/ Contrast
1.Brightness
Toperformbrightness adjustment of the inputRGBsignal
UsetheLeft&Rightbuttontoadjust andbuttonto “Brightness”
2.Contrast
Toadjust the contrastlevelof theinput signal
Usethe Left&Right button toadjust and button to “Contrast”
Phase/ Clock
1. Phase
Toadjust input videosampling clock’sphase
Usethe Left&Right button toadjust and button to “Phase”
2. Clock
Toadjust input videosampling clock
Usethe Left&Right button toadjust and button to “Clock”
H/VPosition
1. H.Position
Toadjust the horizontalsizeof theframe
Usethe Left &Right button toadjustand buttonto “H.position”.
2.V.Position
Toadjust the verticalpositionof theframe
Usethe Left&Right button toadjust and button to “V.position”.
10.LCD Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.13
MISC
1.Information
The firstheaderrowshowsthe current resolution setup
The second headerrowshowsthe horizontalfrequency ofthecurrent
input signal
The thirdheaderrowshowsthe verticalfrequency ofthecurrentinput
signal
2.OSDTimer
Tomodifythe durationof theOSDtime-out
3.Color
a) 5500K
Select ColourTempat 5500K
b)6500K
Select ColourTempat 6500K
c) 9500K
Select ColourTempat 9500K
d)User
Change ColourTempbymanual
4.Language
Toselectthelanguageof OSDmenu 7Languages:
(1)English
(2)Japanese(日本語)
(3)Chinese(中文)
(4)German
(5)Francais
(6)Espanol
(7)Italiano
10.LCD Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.14
ResolutionSettings
ForMicrosoftWindows
Step1 Pressrightclickon the desktop
Step2 Choose “Properties”
Step3 Change the “Screen Resolution”
Step4 Change the “Screen refreshrate”
10.LCD Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.15
10.LCD Session
ResolutionSettings
ForSUN Servers
ResolutionconfigurationproceduresshouldberunbyqualifiedSUN
serveradministrator
Sun Serversareusing resolution at 1152 x900x76Hz.
Supported resolutionmode for15”LCD:
1024 x768 x70/75Hz
Supported resolutionmode for17”LCD:
1280 x1024 x75Hz
You needtochange the SunServerresolution beforeyouconnectto
LCD Display.
Pleasedothe following procedurestochangethe resolution settings:
1.Asroot:
You mayfind the followingcomment “/user/sbin/m64config”.
2.Toviewcurrentresolution:
Type “/user/sbin/m64config prconf”.
3. Tochange to1024x768 @70MHz:
Type “/user/sbin/m64config res1024x768x70 now”.
4.The screen willbe rubbish.
5. Then type “pkillXsun”.
And Type “pkillXsession”torestart theXsession.
UnderCommon Desktop Environment (CDE).
TochangetheOpenBootresolution,youcantypethefollowing
command inOKprompt.
1.InOKprompt, type “setenvoutput-devicescreen:r1024x768x70”.
2.Type “printenv”toconfirmthe resolutionhasbeen changed
to1024x768x70Hz.
3.Then type, “reset”torestartthe system.
Note:RemembertoRESTARTthe serveraftertheseprocesses.
Note: RemembertoRESTARTthe serveraftertheseprocesses.
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.16
KVM
Session
RKP115 / RKP117 / RKP119UserManual

Rev. : 1.0
P.18
11.KVMSession
RKP115 / RKP117 / RKP119UserManual
k j kl
o
n m
Location Component
8or16 PCPorts
SerialPort
RJ-45 LAN Port
Cascade Port
VirtualMediaUSB Port
DCPowerInput
RearPanelComponents
j
k
l
m
n
o
Figure 11-1. Identifying IPKVMrearpanelcomponents
Rear View