i3 International Di721 User manual

©2011 i3International Inc.The i3logo is property of i3International Inc. All rights reserved. Specifications, configurations, components and options listed are subject to change without notice.This data sheet may not be reproduced without permission.
www.i3international.com
1.866.840.0004
U.S.A. 440 Lawrence Bell Drive, Suite
16, Williamsville. NY, 14221
Canada 780 Birchmount Road, Unit
16, Scarborough. ON, M1K 5H4
International Standards
Organization Registered Firm;
ISO 9001 Quality System Manufactured & Assembled in Canada
Di721 Indoor Dome Camera
- Surface mount
- Flush Mount Using Back Box
MOUTNING OPTIONS
- Flush mount
FEATURES
- Versatile design for installation in all indoor environments
- 700TVL Sony CCD
- 2.8~10.5mm lens
- Electronic Wide dynamic range (EWDR)
- Day/Night with Infrared Cut Filter
- Vandal resistant
- Flush Mountable
- Pendent cap included to standard ¾ inch fitting
- 3D noise reduction
- 3-axis rotation
- 12VDC / 24VAC
- Wire management
- i³ Superior 3 year warranty
APPLICATION & BENEFITS
The Di721 AmbiX series of domes integrates Electronic Wide Dynamic Range (EWDR), Day/
Night fuctionality in a vandal-resistant, user-friendly design for effective 24/7 surveillance.
Equipped with a 700 TVL Sony CCD sensor, this camera delivers vivid daytime color and active
night image capabilities.
This all purpose indoor dome was designed to save installation time as mounting adaptors for
various environments are no longer needed. Rich with practical enhancements, the Di721 is
ideal for a wide variety of security applications including retail, schools and commercial
properties.
- Easily accessible joystick for convenient control of OSD menu system and features
- Video patch lead enables local image verification on a portable monitor
- Pan-Tilt-Twist (3-axis) gimbal enables installers to correct off-center images for properly
centered images even along walls
- Conduit and electrical gang box compatible for easy installations
- Built-in pendant mount back box

Part Number
SPECIFICATION
Signal System NTSC PAL
IMAGE SYSTEM
Image Pickup Device 1/3” SONY Exview HAD CCD II
Effective Pixels (HxV) 976 (H) × 494 (V) 976 (H) × 582 (V)
ELECTRIC
Scanning System 2:1 Interlace V: 59.94 Hz , H: 15.734KHz 2:1 Interlace V: 50 Hz , H: 15.625 KHz
Sync System Internal/Linelock
Horizontal Resolution 700 TV lines
Bulit-in Lens f=2.8mm~10.5mm,F1.2 DC iris varifocal
View Angle Horizontal:99.6°(wide)~24.9°(tele)
Vertical:73.2°(wide)~18.8°(tele)
Gamma Correction 0.45
Minimum Illumination F1.2 @50IRE, 0.02ux,@30IRE, 0.01lux
S/N Ratio More than 50dB (AGC off)
Gain Control On / Off (selectable)
White Balance ATW/ Manual/ User/ Push/ Push lock
Electric shutter 1/60 sec 1/50 sec
Flickerless On / Off (selectable)
BLC Off/ BLC/ HLC (high Light Compensation) (selectable)
Day/Night Mode Digital Day/Night
DNR Yes
Motion Detection Yes, 4 areas (max)
Privacy Mask Yes, 8 zones (max)
High Light Compensation Yes
WDR On / Off (selectable)
OSD Yes
Multi Language English, Japanese, German, French, Russian, Portuguese, Spanish, Simplified Chinese
Video Output 1Vpp composite output, 75 ohm
Dome Color White / Black
Power Requirement DC 12V & AC 24V ± 10%
Power Consumption 2.5W (max)
ENVIRONMENT
Operating Temperature -10ºC ~ 50ºC (14 ºF ~ 122 ºF)
Operating Humidity 90% MAX
Storage Temperature -20ºC ~ 60ºC (-4 ºF ~ 140 ºF)
Storage Humidity 70% MAX
MECHANISM
Dimension(øxH) ø 112mm x 97mm
Weight 300g approximately
WARRANTY i³ Superior 3 year warranty
Di721 Di721P