i3 International i3-B731 User manual

• Power Supply
Ensure the supplied voltage meets the power consumption requirements of this
camera before powering the camera on. Incorrect voltage may cause irreparable
damage to the video camera and will effectively void the camera warranty.
• Cleaning
For maximum optical clarity, the camera dome or lens must remain clean. Use a-
soft, dry cloth to remove finger prints or dust from the dome cover.
Use a blower to remove dust from the lens.-
Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a-
small quantity of neutral detergent, then wipe dry.
Do not use volatile solvents such as alcohol, benzene, or thinners, as they may-
damage the surface finishes.
• Servicing
To avoid electrical shock and to preserve the product warranty, DO NOT-
disassemble the camera. Refer servicing to qualified personnel only.
• Package Contents
IR Bullet Camera x1-
Printed Quick Start Guide x1-
CD-ROM (User Manual) x1-
Guide Pattern Sticker (Mounting Template) x1-
TP4-25L screw x3-
1/4” x 1 3/8” plastic anchor x3-
• Camera Parts
• Camera Installation
Step 1. Mounting the camera
Place the “Guide Pattern Sticker” included with your purchase on the desired location.1.
Drill three holes on the installation surface and insert provided anchors into the pre-2.
drilled holes.
Install the bracket base onto the installation surface and fasten securely using the3.
provided screws.
Step 2. Connecting the cables
Connect the camera’s power/video cable to external power and monitor.
Waterproof IR D/N Bullet Camera i3-B731
Quick Start Guide
All manuals and user guides at all-guides.com
all-guides.com

Waterproof IR D/N Bullet Camera
QUICK START GUIDE
Step 3. Adjusting the camera angle
Loosen the adjustment screws and rotate the adjustment ring to loosen.
Adjust the angle for optimum image view. After the adjustment, re-tighten the adjustment
ring and re-fasten the adjustment screws.
PART NUMBER B731 IR BULLET CAMERA
Signal system NTSC, PAL
Image sensor 1/3” SONY Exview HAD CCD II
Scanning system 2:1 Interlace
NTSC: 59.94 Hz (V), 15.734KHz (H)
PAL: 50Hz (V), 15.625KHz (H)
Sync system Internal
Horizontal resolution 700 TV line
Day / Night mode Digital Day / Night
Built-in lens f=4.3mm, F1.8
IRIS control N/A
Effective pixels No. NTSC: 976 (H) × 494 (V), PAL: 976 (H) × 582 (V)
Min. illumination F1.8 color mode: 0.04 lux @50 IRE,
0.02 lux @30 IRE,
0 lux (IR LED Turn ON)
AGC, BLC, flickerless Auto, Always on(Center), N/A
White balance ATW (2500°K~10000°K)
S/N ratio > 50dB (AGC off)
Angle of view Horizontal:73.7°
Vertical:47.3°
WDR N/A
Video output 1Vpp composite output, 75 ohm
Gamma correction 0.45
Iris control N/A
DNR N/A
Motion detection N/A
IR LED Super power LED x24 pcs
IR wavelength 850nm
IR distance 25M (80 ft), base on object of view reflecting
IR light
IR turn on status Under 10 lux by photocell auto controlled
LED life > 10,000 hours (50ºC/122ºF)
Privacy mask N/A
Multi language N/A
ENVIRONMENT
Housing material Metal
Weight 300g (0.67 lb) approx.
Operating temperature -40°C ~ 50°
Operating humidity 90% RH max
Storage temperature -20°C ~ 60°C (-4º~140º F)
Dimensions (øxH) ø71mm x 68.8mm x 158.9mm
(2.8” x 2.71”x 6.26”)
Vandal resistance N/A
Protection class IP66
ELECTRICAL
Power requirement 12VDC ± 10%
Power consumption 4W (max.)
Electric shutter NTSC: 1/60~1/10k sec, PAL: 1/50~1/10k sec
WARRANTY i³ Superior 3 year warranty
All manuals and user guides at all-guides.com