IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard... User manual

ibm
ibmibm
ibm
Hard disk drive specifications
Ultrastar 146Z10
3.5 inch SCSI hard disk drive
IC35L018UWDY10
IC35L018UCDY10
IC35L036UWDY10
IC35L036UCDY10
IC35L073UWDY10
IC35L073UCDY10
IC35L146UWDY10
IC35L146UCDY10
Models:
Revision 2.2 02 February 2002
S07N9742-03 Publication number 3630
IBM storage products

This page intentionally left blank.

ibm
ibmibm
ibm
Hard disk drive specifications
Ultrastar 146Z10
3.5 inch SCSI hard disk drive
IC35L018UWDY10
IC35L018UCDY10
IC35L036UWDY10
IC35L036UCDY10
IC35L073UWDY10
IC35L073UCDY10
IC35L146UWDY10
IC35L146UCDY10
Models:
Revision 2.2 02 February 2002
S07N9742-03 Publication number 3630
IBM storage products

1st Edition (Rev. 2.0) S07N9742-01 (31 January 2002)
2nd Edition (Rev. 2.1) S07N9742-02 (01 February 2002)
3rd Edition (Rev. 2.2) S07N9742-03 (02 February 2002)
The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EI THER EXPRESS OR IMPLIED, IN-
CLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. IBM may make improve-
ments and/or changes in the product(s) and/or the program(s) described in this publication at any time.
It is possible that this publication may contain reference to, or information about, IBM products (machines and
programs), programming, or services that are not announced in your country. Such references or information must
not be construed to mean that IBM intends to announce such IBM products, programming, or services in your
country.
Technical information about this product is available by contacting your local IBM representative or the following:
Internet: http://www.ibm.com/harddrive
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of
this document does not give you any license to these patents. You can send license inquiries, in writing, to the IBM
Director of Commercial Relations, IBM Corporation, Armonk, NY 10577.
©Copyright International Business Machines Corporation 2002. All rights reserved.
Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Table of contents
327.5.1 Input voltage ............................................................. 327.5 DC power requirements ......................................................... 317.4 Cooling requirements ........................................................... 307.3.1 Corrosion test ............................................................ 307.3 Environment ................................................................... 287.2.2 Jumper signal description on J4 ............................................. 277.2.1 Jumper signal description on J6 ............................................. 267.2 Option jumper block ............................................................ 257.1.7 Auxiliary connector on 68-pin model ......................................... 247.1.6 SCSI bus electrical characteristics ........................................... 247.1.5 Hot plug/unplug ........................................................... 247.1.4 SCSI bus terminator ....................................................... 247.1.3 SCSI cable ............................................................... 227.1.2 SCSI bus connector ....................................................... 217.1.1 Power connector .......................................................... 217.1 Electrical interface specification .................................................. 217.0 Specification ................................................................. 196.2 Reassigned format (G-List) ...................................................... 196.1 Shipped format (P-List) ......................................................... 196.0 Physical format ............................................................... 175.2 Error recovery procedure ........................................................ 175.1 Equipment status .............................................................. 175.0 Data integrity ................................................................. 164.5.7 Throughput .............................................................. 154.5.6 Buffering operation (read ahead/write cache) ................................. 154.5.5 Data transfer speed ....................................................... 144.5.4 Spindle stop time ......................................................... 144.5.3 Drive ready time .......................................................... 134.5.2 Mechanical positioning ..................................................... 124.5.1 Command overhead ....................................................... 124.5 Performance characteristics ..................................................... 114.4 Cylinder allocation .............................................................. 104.3.2 World Wide ID - Block assignment ........................................... 104.3.1 Product ID ............................................................... 104.3 Inquiry Information ............................................................. 94.2 Data sheet ..................................................................... 94.1 Formatted capacity .............................................................. 94.0 Drive characteristics ........................................................... 73.3 Actuator ....................................................................... 73.2 Head disk assembly ............................................................. 73.1 Control electronics .............................................................. 73.0 Fixed disk subsystem description ............................................... 5Part 1. Functional specification ..................................................... 32.0 Outline of the drive ............................................................. 21.3 General caution ................................................................. 11.2 Glossary ....................................................................... 11.1 Introduction .................................................................... 11.0 General .......................................................................ixFigures ...........................................................................
Ultrastar 146Z10 hard disk drive specifications
iii

758.7.8 Log Sense Page E ........................................................ 748.7.7 Log Sense Page D ........................................................ 738.7.6 Log Sense Page 6 ........................................................ 728.7.5 Log Sense Page 5 ........................................................ 708.7.4 Log Sense Page 3 ........................................................ 688.7.3 Log Sense Page 2 ........................................................ 678.7.2 Log Sense Page 0 ........................................................ 668.7.1 Log Page parameters ..................................................... 658.7 LOG SENSE (4Dh) ............................................................. 648.6 LOG SELECT (4Ch) ............................................................ 578.5.1 Inquiry DATA ............................................................. 558.5 INQUIRY (12h) ................................................................ 538.4.2 Defect descriptor ......................................................... 528.4.1 Defect list ................................................................ 518.4 FORMAT UNIT (04h) ........................................................... 508.3 Byte ordering conventions ....................................................... 508.2 Abbreviations .................................................................. 508.1 SCSI Control Byte .............................................................. 498.0 SCSI Command Set ........................................................... 47Part 2. Interface specification ..................................................... 467.12.4 Flammability ............................................................ 467.12.3 German Safety Mark ..................................................... 467.12.2 European Standards Compliance .......................................... 467.12.1 UL and CSA standard conformity .......................................... 467.12 Safety ....................................................................... 457.11.3 BSMI Mark .............................................................. 457.11.2 C-Tick Mark ............................................................. 457.11.1 CE Mark ................................................................ 457.11 Electromagnetic compatibility ................................................... 447.10 Identification labels ............................................................ 437.9 Acoustics ..................................................................... 427.8.4 Non-operating shock ...................................................... 427.8.3 Operating shock .......................................................... 417.8.2 Non-operating vibrations ................................................... 417.8.1 Operating vibration ........................................................ 417.8 Vibration and shock ............................................................ 407.7.6 Breather hole ............................................................. 407.7.5 Heads unload and actuator lock ............................................. 397.7.4 Mounting positions and tappings ............................................ 387.7.3 Interface connector ........................................................ 377.7.2 Mechanical dimensions .................................................... 367.7.1 Outline .................................................................. 367.7 Mechanical specifications ....................................................... 357.6.7 Temperature Warning ..................................................... 347.6.6 Preventive maintenance ................................................... 347.6.5 Failure prediction (PFA/S.M.A.R.T.) ......................................... 347.6.4 Equipment errors ......................................................... 347.6.3 Seek/ID miscompare errors ................................................ 347.6.2 Data reliability ............................................................ 347.6.1 Start/stop cycles .......................................................... 347.6 Reliability ..................................................................... 337.5.4 Power consumption efficiency index ......................................... 337.5.3 Ripple voltage ............................................................ 327.5.2 Power supply current ......................................................
Ultrastar 146Z10 hard disk drive specifications
iv

1438.23.1 Receive Diagnostic Results Page 0 ........................................1438.23 RECEIVE DIAGNOSTICS RESULTS (1Ch) ......................................1418.22 REASSIGN BLOCKS (07h) ....................................................1408.21 READ LONG (3Eh) ...........................................................1398.20.3 Physical Sector Format (101b) ............................................1388.20.2 Bytes from Index Format (100b) ..........................................1388.20.1 Defect List Header ......................................................1378.20 READ DEFECT DATA (12) (B7h) ..............................................1368.19.3 Physical Sector Format (101b) ............................................1358.19.2 Bytes from Index Format (100b) ..........................................1358.19.1 Defect List Header ......................................................1348.19 READ DEFECT DATA (10) (37h) ...............................................1328.18 READ CAPACITY (25h) .......................................................1318.17.5 Echo Buffer Descriptor (Mode 1011b) ......................................1318.17.4 Read Data from Echo Buffer (Mode 1010b) .................................1308.17.3 Descriptor (Mode 0011b) ................................................1308.17.2 Read Data (Mode 0010b) ................................................1308.17.1 Combined Header And Data (Mode 0000b) .................................1298.17 READ BUFFER (ACH) ........................................................1288.16 READ (10) (28h) .............................................................1278.15 READ (6) (08h) ..............................................................1268.14 PRE-FETCH (34h) ...........................................................1248.13.5 Summary ..............................................................1248.13.4 Parameter list ..........................................................1228.13.3 Type ..................................................................1228.13.2 Scope .................................................................1208.13.1 Service Action .........................................................1198.13 PERSISTENT RESERVE OUT (5Fh) ...........................................1188.12.4 Parameter data for Read Reservation Descriptor ............................1178.12.3 Parameter data for Read Reservations .....................................1178.12.2 Parameter data for Read Keys ............................................1168.12.1 Service Action ..........................................................1168.12 PERSISTENT RESERVE IN (5Eh) .............................................1158.11 MODE SELECT (10) (55h) ....................................................1148.10 MODE SELECT (6) (15h) .....................................................1138.9 MODE SENSE (10) (5Ah) ......................................................1118.8.13 Mode Page 1C (Informational Exceptions Control) ...........................1108.8.12 Mode Page 1A (Power Control Parameters) ................................1048.8.11 Mode Page 19 (Port Control) .............................................1028.8.10 Mode Page 0C (Notch Parameters) .......................................1008.8.9 Mode Page A (Control Mode Page Parameters) .............................. 988.8.8 Mode Page 8 (Caching Parameters) ......................................... 978.8.7 Mode Page 7 (Verify Error Recovery Parameters) ............................. 968.8.6 Mode Page 4 (Rigid Disk Drive Geometry Parameters) ......................... 948.8.5 Mode Page 3 (Format Device Parameters) ................................... 928.8.4 Mode Page 2 (Disconnect/Reconnect Parameters) ............................ 888.8.3 Mode Page 1 (Read/Write Error Recovery Parameters) ........................ 858.8.2 Mode Page 0 (Vendor Unique Parameters) ................................... 818.8.1 Mode Parameter List ...................................................... 808.8 MODE SENSE (6) (1A) ......................................................... 798.7.11 Log Sense Page 2F ...................................................... 778.7.10 Log Sense Page 10 ...................................................... 768.7.9 Log Sense Page F ........................................................
Ultrastar 146Z10 hard disk drive specifications
v

18710.1.17 CLEAR QUEUE TAG (0Eh) .............................................18710.1.16 ABORT TAG (0Dh) ....................................................18710.1.15 TARGET RESET (0Ch) .................................................18710.1.14 LINKED COMMAND COMPLETE WITH FLAG (0Bh) .......................18610.1.13 LINKED COMMAND COMPLETE (0Ah) ..................................18610.1.12 MESSAGE PARITY ERROR (09h) .......................................18610.1.11 NO OPERATION (08h) .................................................18610.1.10 MESSAGE REJECT (07h) ..............................................18610.1.9 ABORT (06h) ..........................................................18510.1.8 INITIATOR DETECTED ERROR (05h) .....................................18510.1.7 DISCONNECT (04h) ....................................................18510.1.6 RESTORE POINTERS (03h) .............................................18510.1.5 SAVE DATA POINTER (02h) .............................................18310.1.4 PARALLEL PROTOCOL REQUEST (01,06,04H) ............................18110.1.3 WIDE DATA TRANSFER REQUEST (010203H) ............................17810.1.2 SYNCHRONOUS DATA TRANSFER REQUEST (010301H) ..................17810.1.1 TASK COMPLETE (00h) .................................................17710.1 Supported Messages .........................................................17710.0 SCSI Message System .......................................................1759.0 SCSI Status Byte .............................................................1748.45 WRITE SAME (41h) ..........................................................1738.44 WRITE LONG (3Fh) ..........................................................1728.43.6 Write Data to Echo Buffer (Mode 1010b) ...................................1728.43.5 Download Microcode and Save (Mode 0111b) ..............................1718.43.4 Download Microcode and Save (Mode 0101b) ..............................1718.43.3 Download Microcode (Mode 0100b) .......................................1708.43.2 Write Data (Mode 0010b) ................................................1708.43.1 Combined Header And Data (Mode 0000b) .................................1698.43 WRITE BUFFER (3Bh) .......................................................1688.42 WRITE AND VERIFY (2Eh) ...................................................1678.41 WRITE (10) (2Ah) ............................................................1668.40 WRITE (6) (0Ah) .............................................................1658.39 VERIFY (2Fh) ...............................................................1648.38 TEST UNIT READY (00h) .....................................................1638.37 SYNCHRONIZE CACHE (35h) .................................................1628.36 START STOP Unit (1Bh) ......................................................1618.35 SET DEVICE IDENTIFIER (A4h) ...............................................1608.34.3 Send Diagnostic Page 80 ................................................1598.34.2 Send Diagnostic Page 40 ................................................1598.34.1 Send Diagnostic Page 0 .................................................1578.34 SEND DIAGNOSTIC (1Dh) ....................................................1568.33 SEEK EXTENDED (10) (2Bh) ..................................................1558.32 SEEK (6) (0Bh) ..............................................................1548.31 REZERO UNIT (01h) .........................................................1538.30 RESERVE (10) (56h) .........................................................1528.29 RESERVE (6) (16h) ..........................................................1518.28 REQUEST SENSE (03h) ......................................................1508.27 REPORT LUN (A0h) .........................................................1488.26 REPORT DEVICE IDENTIFIER (A3h) ...........................................1478.25 RELEASE (10) (57h) .........................................................1468.24 RELEASE (6) (17h) ..........................................................1458.23.3 Receive Diagnostic Results Page 80 ......................................1448.23.2 Receive Diagnostic Results Page 40 ......................................
Ultrastar 146Z10 hard disk drive specifications
vi

21211.17 Diagnostics ................................................................21111.16.4 Self-initiated Reset .....................................................21111.16.3 SCSI Bus Reset and TARGET RESET Message ...........................21011.16.2 Power On Reset .......................................................21011.16.1 Reset Sources ........................................................21011.16 Reset .....................................................................20911.15 Contingent Allegiance Condition ..............................................20911.14.3 Initiator Data Transfer Mode Parameter ...................................20911.14.2 Initiator Mode Select/Mode Sense Parameters .............................20911.14.1 Initiator Sense Data ....................................................20911.14 Multiple Initiator Environment .................................................20811.13 Selection without ATN .......................................................20811.12 Non-arbitrating systems ......................................................20811.11 Single Initiator Selection .....................................................20811.10 Reselection Timeout ........................................................20811.9 Segmented Caching ..........................................................20711.8 Automatic Defect Reallocation .................................................20711.7 Write Cache .................................................................20611.6 Back to Back Write ...........................................................20611.5 Concurrent I/O Process .......................................................20611.4 Command reordering .........................................................20511.3.6 Device behavior on Command queuing ....................................20511.3.5 Queue Full status .......................................................20511.3.4 Command queuing rule ..................................................20511.3.3 Untagged queuing ......................................................20511.3.2 Tagged queuing ........................................................20511.3.1 Queue depth ...........................................................20411.3 Command queuing ...........................................................20411.2 Priority commands ...........................................................20311.1.9 Command processing while reserved ......................................19711.1.8 Degraded Mode ........................................................19711.1.7 Deferred Error ..........................................................19711.1.6 Command Processing During Startup and Format Operations .................19611.1.5 Unit Attention Condition ..................................................19411.1.4 Command Processing during execution of active I/O process .................19411.1.3 Incorrect Initiator Connection .............................................19411.1.2 Invalid LUN in Identify Message ...........................................19311.1.1 Priority of SCSI Status Byte Reporting .....................................19311.1 SCSI Protocol ...............................................................19311.0 Additional information ......................................................19210.4.7 MESSAGE REJECT Message ............................................19210.4.6 INITIATOR DETECTED ERROR Message .................................19110.4.5 DATA OUT Phase Parity Error ............................................19110.4.4 COMMAND Phase Parity Error ...........................................19110.4.3 MESSAGE IN Phase Parity Error (Message Parity Error) .....................19110.4.2 MESSAGE OUT Phase Parity Error .......................................19110.4.1 Unexpected BUS FREE Phase Error Condition .............................19110.4 SCSI Bus Related Error Handling Protocol .......................................19010.3 Attention Condition ...........................................................18910.2 Supported Message Functions .................................................18810.1.20 IDENTIFY (80 - FFh) ...................................................18810.1.19 IGNORE WIDE RESIDUE (2301h) .......................................18710.1.18 QUEUE TAG MESSAGES (20xxh, 21xxh, 22xxh) ..........................
Ultrastar 146Z10 hard disk drive specifications
vii

231Index ...........................................................................23012.2.14 Reserved (Byte 30 through 31) ..........................................23012.2.13 Physical Error Record (Byte 24 thru 29) ...................................22512.2.12 Vendor unique error information (Byte 20 through 23) .......................22412.2.11 Vendor Unique Error Information (Byte 18 through 19) ......................22212.2.10 Sense Key Specific (Byte 15 through 17) ..................................22212.2.9 FRU : Field Replaceable Unit (Byte 14) ....................................21812.2.8 Additional Sense Code/Qualifier (Byte 12 and 13) ...........................21712.2.7 Command Specific Information (Byte 8 through 11) ..........................21712.2.6 Additional Sense Length (Byte 7) ..........................................21712.2.5 Information Bytes (Byte 3 through 6) .......................................21612.2.4 Sense Key (Bit 3 - 0 of byte 2) ............................................21612.2.3 ILI: Incorrect Length Indicator (Bit 5 of byte 2) ...............................21612.2.2 Error Code (Bit 6 - 0 of byte 0) ............................................21612.2.1 Valid (Bit 7 of byte 0) ....................................................21612.2 Sense Data Description .......................................................21512.1 SCSI Sense Data Format .....................................................21512.0 SCSI Sense Data ............................................................21411.19 Information Unit Support .....................................................21411.18 Idle Time Function ..........................................................21211.17.2 Self-test by Send Diagnostic Command ...................................21211.17.1 Power on Diagnostics ..................................................
Ultrastar 146Z10 hard disk drive specifications
viii

Figures
50Figure 49. SCSI Control Byte ........................................................ 49Figure 48. Supported SCSI commands ............................................... 44Figure 47. Interface definition mark, SCSI LVD/SE multimode ............................ 43Figure 46. A-weighted sound power levels ............................................ 41Figure 45. Random vibration PSD profile breakpoints (non-operating) ..................... 41Figure 44. Random vibration PSD profile breakpoints (operating) ......................... 40Figure 43. Breather hole location .................................................... 39Figure 42. Mounting positions and tappings ........................................... 38Figure 41. Interface connector for 80-pin models ....................................... 38Figure 40. Interface connector for 68-pin models ....................................... 37Figure 39. Mechanical dimensions ................................................... 37Figure 38. Physical dimensions ...................................................... 36Figure 37. Outline of the 80-pin model ................................................ 36Figure 36. Outline of the 68-pin model ................................................ 33Figure 35. Power consumption efficiency index ........................................ 33Figure 34. Power supply generated ripple at drive power connector ....................... 33Figure 33. Power supply current of 18-GB models ...................................... 33Figure 32. Power supply current of 36-GB models ...................................... 32Figure 32. Power supply current of 73-GB models ...................................... 32Figure 31. Power supply current of 146-GB models .................................... 32Figure 30. Input voltage ............................................................ 31Figure 29. Module location .......................................................... 31Figure 28. Maximum allowable module surface temperature ............................. 30Figure 27. Temperature and relative humidity .......................................... 30Figure 26. Operating and non-operating conditions ..................................... 29Figure 25. SCSI device ID .......................................................... 28Figure 24. LED circuit .............................................................. 27Figure 23. Auto Start Delay & Delay Start 6/12 drive behavior ............................ 26Figure 22. Jumper pins ............................................................. 25Figure 21. Auxiliary connector ....................................................... 23Figure 20. Table of signals .......................................................... 22
Figure 19. Table of signals .......................................................... 21Figure 18. Power connector pin assignments .......................................... 19Figure 17. P-List physical format .................................................... 16Figure 16. Random access performance (sector size 512 bytes case) .................... 16Figure 15. Simple sequential access performance (sector size 512 byte case) ............. 15Figure 14. Data transfer speed (sector size 512 bytes case) ............................. 14Figure 13. Spindle stop time ........................................................ 14Figure 12. Drive ready time ......................................................... 14Figure 11. Latency time ............................................................ 14Figure 10. Head skew .............................................................. 14Figure 9. Cylinder Skew ............................................................ 13Figure 8. Full stroke seek time ...................................................... 13Figure 7. Mechanical positioning performance ......................................... 12Figure 6. Command overhead ....................................................... 11Figure 5. Cylinder allocation ......................................................... 10Figure 4. Block assignment of World Wide ID in Inquiry Command ........................ 10Figure 3. Product ID in Inquiry Command ............................................. 9Figure 2. Data sheet ................................................................ 9Figure 1. Formatted capacity .........................................................
Ultrastar 146Z10 hard disk drive specifications
ix

111Figure 103. Page 1C (Informational Exceptions Control) ................................110Figure 102. Page 1A (Power Control) ................................................109Figure 101. Report Transfer Capabilities Subpage .....................................108Figure 100. Negotiated Settings Subpage ............................................107Figure 99. Saved Training Configuration Subpage .....................................106Figure 98. Margin Control Subpage ..................................................105Figure 97. Page 19 (Port Control Parameters) Long Format .............................104Figure 96. Page 19 (Port Control parameters) Short format .............................102Figure 95. Page 0C (Notch Parameters) ..............................................100Figure 94. Page A (Control Mode Page Parameters) ................................... 98Figure 93. Page 8 (Caching Parameters) .............................................. 97Figure 92. Mode Page 7 (Verify Error Recovery Parameters) ............................. 96Figure 91. Mode Page 4 (Rigid Disk Drive Geometry Parameters) ........................ 94Figure 90. Mode Page 3 (Format Device Parameters) ................................... 92Figure 89. Mode Page 2 (Disconnect/Reconnect Parameters ) ........................... 88Figure 88. Mode Page 1 (Vendor Unique Parameters ) .................................. 85Figure 87. Vendor Unique Parameters - Page 0 ........................................ 84Figure 86. Page Code Usage ........................................................ 84Figure 85. MODE Parameter Page Format ............................................ 83Figure 84. MODE Parameter Block Descriptor ......................................... 82Figure 83. Mode parameter header (10) ............................................... 81Figure 82. Mode parameter header (6) ................................................ 81Figure 81. Page Code Usage ........................................................ 80Figure 80. MODE SENSE (1A) ....................................................... 79Figure 79. Log Sense Page 2F ....................................................... 79Figure 78. Log Sense Page 10 Extended Segment Number .............................. 78Figure 77. Log Sense Page 10 Self-Test Results ....................................... 77Figure 76. Log Sense Page 10, Self-Test Results ....................................... 76Figure 75. Log Sense Page F Application Client Log .................................... 75Figure 74. Log Sense Page E ........................................................ 74Figure 73. Log Sense Page D ........................................................ 73Figure 72. Log Sense Page 6 ........................................................ 73Figure 71. Log Sense Page 5 (part 2 0f 2) ............................................. 72Figure 70. Log Sense Page 5 (part 1 of 2) ............................................. 71Figure 69. Log Sense Page 3 (part 2 of 2) ............................................. 70Figure 68. Log Sense Page 3 (part 1 of 2) ............................................. 69Figure 67. Log Sense Page 2 (part 2 of 2) ............................................. 68Figure 66. Log Sense Page 2 (part 1 of 2) ............................................. 67Figure 65. Log Sense Page 0 ........................................................ 65Figure 64. LOG SENSE ............................................................. 64Figure 63. LOG SELECT (4C) ....................................................... 63Figure 62. INQUIRY DATA - EVPD = 1 (Page Code = 83h) .............................. 62Figure 61. INQUIRY DATA - EVPD = 1 (Page Code = 80h) .............................. 61Figure 60. INQUIRY DATA - EVPD = 1 (Page Code = 00) ............................... 60Figure 59. SUPPORT values and meanings ........................................... 59Figure 58. Command support data format ............................................. 57Figure 57. INQUIRY Data - CmdDt = 0EVPD = 0 ....................................... 56Figure 56. Page code descriptions .................................................... 55Figure 55. INQUIRY (12) ............................................................ 54Figure 54. Defect descriptor - Physical Sector format. .................................. 54Figure 53. Defect descriptor - Bytes from Index format. ................................. 53Figure 52. Defect descriptor - Block format. ........................................... 52Figure 51. Format of Defect List Header ............................................... 51Figure 50. FORMAT UNIT (04h) .....................................................
Ultrastar 146Z10 hard disk drive specifications
x

157Figure 157. SEND DIAGNOSTIC ....................................................156Figure 156. SEEK (10) .............................................................155Figure 155. SEEK (6) ..............................................................154Figure 154. REZERO UNIT .........................................................153Figure 153. RESERVE (10) ........................................................152Figure 152. RESERVE (6) ..........................................................151Figure 151. REQUEST SENSE .....................................................150Figure 150. LUN Reporting Parameter List Format .....................................150Figure 149. REPORT LUN .........................................................149Figure 148. REPORT DEVICE IDENTIFIER parameter list ..............................148Figure 147. REPORT DEVICE IDENTIFIER ..........................................147Figure 146. RELEASE (10) .........................................................146Figure 145. RELEASE (6) ..........................................................145Figure 144. Receive Diagnostic Results Page 80 .....................................145Figure 143. Translated address .....................................................144Figure 142. Receive Diagnostic Results Page 40 ......................................143Figure 141. Receive Diagnostic Results Page 0 .......................................143Figure 140. RECEIVE DIAGNOSTIC ................................................142Figure 139. Format of REASSIGN BLOCKS data ......................................141Figure 138. REASSIGN BLOCKS ...................................................140Figure 137. READ LONG ..........................................................139Figure 136. Defect Descriptors of Physical Sector Format ...............................138Figure 135. Defect Descriptors of Bytes from Index Format .............................138Figure 134. Defect List Header ......................................................137Figure 133. Read Defect Data (12) ..................................................136Figure 132. Defect Descriptors of Physical Sector Format ...............................135Figure 131. Defect Descriptors of Bytes from Index Format .............................135Figure 130. Defect List Header ......................................................134Figure 129. Read Defect Data (10) ..................................................133Figure 128. Format of READ CAPACITY command reply ...............................132Figure 127. READ CAPACITY ......................................................131Figure 126. Echo Buffer Descriptor ..................................................131Figure 125. Read Buffer Descriptor ..................................................130Figure 124. READ BUFFER Header .................................................129Figure 123. READ BUFFER ........................................................128Figure 122. READ (10) ............................................................127Figure 121. READ (6) ..............................................................126Figure 120. Pre-Fetch .............................................................125Figure 119. APTPL and information held by a drive ....................................124Figure 118. Service Action and parameters and generation counter ......................124Figure 117. PERSISTENT RESERVATION OUT parameter list ..........................123Figure 116. Conflict between new and existing PERSISTENT RESERVATION .............122Figure 115. Persistent Reservation Type Code ........................................122Figure 114. Persistent Reservation Scope Code .......................................120Figure 113. Persistent Reservation Service Action Code ................................119Figure 112. Persistent Reserve Out (5F) .............................................118Figure 111. PERSISTENT RESERVE IN Read Reservation Descriptor ...................117Figure 110. PERSISTENT RESERVE IN parameter data for Read Reservations ...........117Figure 109. PERSISTENT RESERVE IN parameter data for Read Keys ..................116Figure 108. Persistent Reserve In Service Action Codes ................................116Figure 107. Persistent Reserve In ...................................................115Figure 106. MODE SELECT (10) ....................................................114Figure 105. MODE SELECT (6) .....................................................113Figure 104. MODE SENSE (10) .....................................................
Ultrastar 146Z10 hard disk drive specifications
xi

226Figure 210. Sense Data Byte 22 POR Error ...........................................225Figure 209. Sense Data Byte 21 for POR Step ........................................225Figure 208. Sense Data Byte 20 for POR Step .......................................224Figure 207. Sense Data Byte 18 for Error Information ..................................223Figure 206. Progress Indication .....................................................223Figure 205. Actual Retry Count .....................................................222Figure 204. Field Pointer Bytes .....................................................221Figure 203. Sense Key / Sense Code / Qualifier combinations (4 of 4) ...................220Figure 202. Sense Key / Sense Code / Qualifier combinations (3 of 4) ....................219Figure 201. Sense Key / Sense Code / Qualifier combinations (2 of 4) ....................218Figure 200. Sense Key / Sense Code / Qualifier combinations (1 of 4) ....................215Figure 199. Format of Sense Data. ..................................................213Figure 198. Self-test menu for SEND DIAGNOSTIC command ..........................203Figure 197. Format Command Failure Degraded Mode .................................202Figure 196. Self Configuration Failure Degraded Mode .................................
201
Figure 195. Spindle Motor Degraded Mode - Spindle Stopped by Start Stop Unit
Command ....................................................................
200Figure 194. Spindle Motor Degraded Mode - Spindle Start Failure ........................199Figure 193. Spindle Motor Degraded Mode - Auto Start Delay/Spinning Up ................198Figure 192. Spindle Motor Degraded Mode - Disable Auto Start .........................188Figure 191. Ignore Wide Residue Message Format ....................................187Figure 190. Queue Tag Messages ...................................................184Figure 189. Initiator Request/Target Response (DT_REQ = 0, IU_REQ = 0 ................184Figure 188. Initiator Request/Target Response (DT_REQ = 1, IU_REQ = 0 ................183Figure 187. Initiator Request/Target Response (DT_REQ = 1, IU_REQ = 1) ...............183Figure 186. Parallel Protocol Request. ...............................................182Figure 185. Target Request to Initiator ...............................................181Figure 184. Initiator Request/Target Response ........................................181Figure 183. Wide Data Transfer Request. ............................................180Figure 182. Drive Response to Initiator's Transfer Period (SE mode) .....................180Figure 181. Target Response to Initiator's Transfer Period (LVD mode) ...................179Figure 180. Initiator Request/Drive Response (SE mode) ...............................179Figure 179. Initiator Request/Drive Response (LVD mode) ..............................178Figure 178. Synchronous Data Transfer Request. .....................................177Figure 177. Supported Messages ...................................................175Figure 176. SCSI Status Byte. Format of the SCSI STATUS byte. .......................174Figure 175. WRITE SAME (41) .....................................................173Figure 174. WRITE LONG .........................................................170Figure 173. WRITE BUFFER Header ................................................169Figure 172. WRITE BUFFER (3B) ...................................................168Figure 171. WRITE AND VERIFY ...................................................167Figure 170. WRITE (10) ............................................................166Figure 169. WRITE (6) .............................................................165Figure 168. VERIFY ...............................................................164Figure 167. TEST UNIT READY ....................................................163Figure 166. SYNCHRONIZE CACHE ................................................162Figure 165. START STOP Unit ......................................................161Figure 164. SET DEVICE IDENTIFIER Parameter List .................................161Figure 163. SET DEVICE IDENTIFIER ...............................................160Figure 162. Send Diagnostic Page 80 ................................................160Figure 161. Address to translate ....................................................159Figure 160. Diagnostic Page 40 .....................................................159Figure 159. Diagnostic Page 0 ......................................................158Figure 158. SEND DIAGNOSTIC (1D) ...............................................
Ultrastar 146Z10 hard disk drive specifications
xii

230Figure 216. Sense Data Byte 21 for SMART Alert Reason Code .........................229Figure 215. Sense Data Byte 23 for Read/Write Error ..................................229Figure 214. Sense Data Byte 22 for Read/Write Error ..................................228Figure 213. Sense Data Byte 21 for Read/Write Error ..................................228Figure 212. Sense Data Byte 20 for Read/Write Error ..................................227Figure 211. Sense Data Byte 23 for POR Error ........................................
Ultrastar 146Z10 hard disk drive specifications
xiii

Ultrastar 146Z10 hard disk drive specifications
xiv

1.0 General
1.1 Introduction
This document describes the specifications of the following IBM 3.5-inch SCSI drives:
!IC35L018UWDY10 (68 pin)
!IC35L018UCDY10 (80 pin)
!IC35L036UWDY10 (68 pin)
!IC35L036UCDY10 (80 pin)
!IC35L073UWDY10 (68 pin)
!IC35L073UCDY10 (80 pin)
!IC35L146UWDY10 (68 pin)
!IC35L146UCDY10 (80 pin)
The specifications in this document are subject to change without notice.
1.2 Glossary
Meaning
Kilobit
Kilobits per inch
Megabit
Megabits per second
Gigabyte
Megabyte
Kilobyte
Tracks per inch
Machine Level Control
Predictive Failure Analysis (Trademark of IBM Corp.)
Self-Monitoring Analysis and Reporting Technology
Automatic Drive Maintenance
Single Ended SCSI
Low Voltage Differential SCSI
Fibre Channel - Arbitrated Loop
Word
Kb
Kbpi
Mb
Mbps
GB
MB
KB
TPI
MLC
PFA
S.M.A.R.T.
ADM
SE
LVD
FC-AL
Ultrastar 146Z10 hard disk drive specifications
1

1.3 General caution
This drive can be damaged by ESD (Electric Static Discharge). Any damages incurred to the drive after
its removal from the shipping package and the ESD protective bag are the responsibility of the user.
Ultrastar 146Z10 hard disk drive specifications
2

2.0 Outline of the drive
!Storage capacities of 146.8 GB, 73.4 GB, 36.7 GB, and 18.3 GB
!Ultra 320 and Ultra 160
!Interleave factor 1:1
!Variable Sector Size (512-528 bytes/sector)
!Tagged Command Queuing support
!Automatic read/write data transfer
!8 MB segmented sector buffer (from 1 through 256)
!4.7 ms seek time in read operation
!Adaptive read ahead algorithm
!Write Cache
!Back to back write
!ECC on the fly
!Automatic defect reallocation
!Self diagnostics at power on
!Closed loop actuator servo
!High level of integration of the electronics
!Non head disk contact start stop
!Spindle rotation of 10,000 RPM
!Automatic actuator lock
!PFA (SMART)
!Glass substrate disks
NOTE: PFA (Predictive Failure Analysis) is a trademark of the IBM Corporation
Ultrastar 146Z10 hard disk drive specifications
3

This page intentionally left blank.