IBM SAN32M1 Manual

IBM TotalStorage SAN32M1 Switch
Installation and Service Manual
GC26-7665-01


IBM TotalStorage SAN32M1 Switch
Installation and Service Manual
GC26-7665-01


Second Edition (February 2005)
The following paragraph does not apply to any country (or region) where such provisions are inconsistent with local
law.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. Some states (or regions) do
not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply
to you.
Order publications through your IBM
® representative or the IBM branch office serving your locality.
©Copyright International Business Machines Corporation 2005. All rights reserved.
US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

© Copyright IBM Corp. 2005 iii
Contents
Chapter 1 General information
Switch description ...............................................................................1
Switch management.....................................................................2
Error-Detection, reporting, and serviceability features...........5
Zoning feature...............................................................................7
Multiswitch fabrics.......................................................................7
Switch specifications ...........................................................................9
Management server....................................................................11
Ethernet hub (optional)..............................................................13
SANpilot interface......................................................................13
Maintenance approach......................................................................14
Remote workstation configurations................................................15
Minimum remote console hardware specifications...............17
Field-replaceable units ......................................................................18
SFP transceivers ..........................................................................20
Cooling fans.................................................................................21
Power supplies............................................................................21
Connectors and indicators................................................................21
Initial Machine load button.......................................................22
Ethernet LAN connector............................................................22
Power and system error LEDs ..................................................22
FRU status LEDs.........................................................................23
Maintenance port........................................................................23
Software diagnostic features ............................................................23
SAN management application..................................................24
Element manager description .........................................................25
Using the Element Manager.............................................................28
Using dialog boxes ....................................................................28
Keyboard navigation..................................................................28
Hardware view ...........................................................................29
Window layout and function....................................................29
Closing the Element Manager...................................................44
SANpilot diagnostics .................................................................45
SNMP trap message support ....................................................46
E-Mail and call-home support ..................................................47
Tools and test equipment..................................................................47
Tools supplied with the switch.................................................48
Tools supplied by service personnel........................................49

SAN32M1 Fabric Switch Installation and Service Manual
iv
Chapter 2 Installation tasks
Factory defaults .......................................................................... 51
Installation options............................................................................ 54
Summary of installation tasks.......................................................... 55
Task 1: Verify installation requirements ......................................... 56
Task 2: Unpack, inspect, and install the Ethernet hub (optional)57
Unpack and inspect the Ethernet hub .....................................58
Desktop installation ................................................................... 58
Rack-Mount installation ............................................................60
Task 3: Unpack, inspect, and install the switch.............................62
Unpack and inspect the switch................................................. 62
Desktop installation ................................................................... 63
Rack-Mount installation ............................................................64
Task 4: Configure network information ......................................... 64
Task 5: LAN-Connect the switch ..................................................... 71
Task 6: Unpack, inspect, and install the management server...... 71
Task 7: Configure management server password and network
addresses............................................................................................. 75
Configure Password................................................................... 76
Configure private LAN addresses ...........................................77
Configure public LAN Addresses (optional) ......................... 78
Task 8: Configure management server information..................... 80
Access the management server desktop ................................. 80
Configure management server names..................................... 82
Configure gateway and DNS server addresses .....................85
Task 9: Configure Windows 2000 users .......................................... 88
Change default administrator password ................................ 89
Add a new user........................................................................... 90
Change user properties..............................................................92
Task 10: Set management server date and time ............................94
Task 11: Configure the call-home feature (optional)..................... 96
Task 12: Assign user names and passwords..................................97
Task 13: Configure the switch to the management application 101
Task 14: Record or verify management server restore information
103
Task 15: Verify switch-to-management server communication 105
Task 16: Configure PFE Key (optional).........................................106
Task 17: Configure management server (optional)..................... 109
Configure OSMS....................................................................... 109
Installation................................................................................. 109
Configure FMS.......................................................................... 110
SANtegrity™binding features................................................ 112
Fabric binding ........................................................................... 112

v
Contents
Switch binding...........................................................................113
Flexport..............................................................................................119
Open trunking ..................................................................................119
Open trunking log.....................................................................124
Task 18: Set switch date and time ..................................................124
Set date and time manually.....................................................125
Periodically synchronize date and time ................................126
Task 19: Configure SAN32M1 Element Manager applications 126
Configure switch identification ..............................................127
Task 20: Configure switch operating parameters........................128
Switch parameters.....................................................................129
Task 21: Configure fabric operating parameters..........................131
Fabric parameters......................................................................132
Configure ports (open systems mode)...................................134
Configure ports (FICON mode)..............................................136
Configure port addresses (FICON mode) .............................138
Configure SNMP trap message recipients ............................141
Configure and enable E-mail notification .............................142
Configure and enable Ethernet events...................................143
Configure and enable call-home event notification.............144
Configure threshold alerts.......................................................145
Procedures..................................................................................146
Task 22: Configure open trunking .................................................152
Task 23: Test remote notification (optional)..................................152
Task 24: Back up configuration data..............................................153
Task 25: Configure the switch from the SANpilot Interface
(optional) ...........................................................................................157
Configure switch ports.............................................................159
Configure switch identification ..............................................161
Configure date and time ..........................................................162
Configure operating parameters.............................................163
Configure fabric parameters....................................................165
Configure Network Information ............................................168
Configure SNMP.......................................................................170
Enable or Disable the CLI ........................................................172
Enable or Disable Host Control ..............................................173
Configure User Rights..............................................................174
Configure Port Binding............................................................176
Configure Switch Binding .......................................................177
Configure Fabric Binding ........................................................178
Enable or Disable Enterprise Fabric Mode............................180
Configure OpenTrunking ........................................................181
Install PFE Keys (Optional) .....................................................184

SAN32M1 Fabric Switch Installation and Service Manual
vi
Task 26: Cable Fibre Channel Ports...............................................186
Task 27: Connect Switch to a Fabric Director (Optional) ...........187
Chapter 3 Diagnostics
Maintenance analysis procedures ................................................. 191
Factory defaults ........................................................................ 191
Quick start ................................................................................. 191
MAP 0000: Start MAP .....................................................................195
MAP 0100: power distribution analysis ....................................... 218
MAP 0200: POST, reset, or IPL failure analysis........................... 224
MAP 0300: console application problem determination............226
MAP 0400: loss of console communication..................................235
MAP 0500: fan and CTP card failure analysis .............................256
MAP 0600: port failure and link incident analysis...................... 261
MAP 0700: fabric, ISL, and segmented port problem
determination................................................................................... 281
MAP 0800: server hardware problem determination.................297
Chapter 4 Repair information
Factory defaults ........................................................................ 305
Procedural notes .............................................................................. 306
Using log information.....................................................................307
EFC audit log............................................................................. 308
EFC event log ............................................................................308
EFC session log ......................................................................... 309
EFC product status log ............................................................ 309
EFC fabric log............................................................................ 310
Audit log.................................................................................... 311
Event log .................................................................................... 311
Hardware log ............................................................................ 312
Link incident log....................................................................... 314
Threshold alert log ................................................................... 315
SANpilot logs............................................................................ 318
Using views ......................................................................................320
Port list view ............................................................................. 320
FRU list view .................................................................................... 322
Node list view ........................................................................... 324
Performance view..................................................................... 325
Zone set view ............................................................................ 325
Performing port diagnostics ..........................................................327
Port LEDs................................................................................... 327

vii
Contents
Hardware view..........................................................................328
Performance view .....................................................................332
Perform loopback tests.............................................................334
Perform channel wrap test.......................................................338
Swapping ports.................................................................................339
Collecting maintenance data ..........................................................340
SANpilot interface ....................................................................341
EFC server..................................................................................343
Clean fiber-optic components ........................................................345
Power-On procedure .......................................................................346
Power-Off procedure .......................................................................347
Reset or IPL the switch....................................................................347
Reset the switch.........................................................................348
IPL the switch............................................................................349
Set the switch online or offline.......................................................349
Set online state...........................................................................350
Set offline state...........................................................................350
Block and unblock ports..................................................................351
Block a port ................................................................................351
Unblock a port...........................................................................352
Manage firmware versions .............................................................353
Determine a switch firmware version....................................353
Add a firmware version...........................................................354
Modify a firmware version description.................................357
Delete a firmware version........................................................358
Download a firmware version to a switch ............................358
Manage configuration data.............................................................361
Back up the configuration........................................................362
Restore the configuration.........................................................363
Reset configuration data ..........................................................364
Install or upgrade software.............................................................365
Chapter 5 FRU removal and replacement
Remove and replace FRUs..............................................................369
FRUs............................................................................................369
Procedural notes........................................................................369
RRP: SFP transceiver........................................................................370
Removal......................................................................................370
Replacement...............................................................................371
RRP: power supply ..........................................................................372
Removal......................................................................................372
Replacement...............................................................................373

SAN32M1 Fabric Switch Installation and Service Manual
viii
RRP: cooling fan FRU...................................................................... 374
Removal ..................................................................................... 374
Replacement.............................................................................. 375
RRP: CTP card - switch replacement ............................................376
Replacing a failed switch......................................................... 376
Chapter 6 Illustrated parts breakdown
Front-Accessible FRUs .................................................................... 379
Rear-Accessible FRUs...................................................................... 380
Power plugs and receptacles..........................................................382
Miscellaneous parts......................................................................... 385
Appendix A Messages
Element Manager messages ..........................................................387
A.................................................................................................. 387
C .................................................................................................. 389
D.................................................................................................. 399
E................................................................................................... 400
F................................................................................................... 402
I.................................................................................................... 404
L................................................................................................... 410
M .................................................................................................410
N.................................................................................................. 411
O.................................................................................................. 412
P................................................................................................... 412
R .................................................................................................. 414
S................................................................................................... 414
T................................................................................................... 416
U.................................................................................................. 421
Y .................................................................................................. 421
Appendix B Event code tables
System events (000 through 199) .................................................. 425
Power supply events (200 through 299) ...................................... 443
Fan module events (300 through 399) .......................................... 448
CTP card events (400 through 499) ..............................................454
Port module events (500 through 599) .........................................468
MPC module events (600 through 699) .......................................489
CMM module events (800 through 899) ......................................495