IC-M501
- 3 -
Name Operation Silk Print Function and Operation
Repress once 16 Recall CH16
Holding for one sec. 9 Recall CH9 or reprogramming CALL CH when CH 9 is
selected
16 Repress 16 with holding
HI/LOW button Editing CH name
Repress once CH/WX Toggle between user CH and WX
Holding for 1sec. DW Start/Stop Dual or tri watch
CH/WX Repress CH/WX with
holding HI/LOW button U/I/C Selecting USA, INT or CANADA mode
Repress once SCAN Start/Stop normal or priority scan
Holding for 1sec. TAG Tag or un-tag channel for scanning
SCAN Repress SCAN with
holding HI/LOW button Clear all tagged channel with holding those buttons
Repress once HI/LOW Switch output power between 25W and 1W
Holding for 1sec. No function
HI/LOW With Holding HI/LOW
button No function
Repress once DSC/ENT Selecting DSC call menu and selection
Holding for 1sec. POS Display LAT/LON and time
DSC/ENT Repress DSC with
holding HI/LOW button No function
Repress once LO/DX Turning on/off ATT on receiver
Holding for 1sec. IC Turning on/off intercom
LO/DX Repress LO/DX with
holding HI/LOW button Turning on/off scrambler
Repress once No function
Holding for 5 sec. DISTRESS Transmitting distress signals
DISTRESS Repress DISTRESS with
holding HI/LOW button No function
Turning knob Selecting CH
SELECTOR Turing Dial knob with
holding HI/LOW button Adjusting dimmer
POWER Repress POWER Turning on /off the radio
VOLUME Turing knob VOL Adjusting receive audio
SQUELCH Turning knob SQL Adjusting SQL
Turning on the radio with holding CH 16 will select radio setup mode
