Icom UT-133 User manual
INSTRUCTIONS
Bluetooth®UNIT
UT-133
Thank you for purchasing the UT-133
Bluetooth®
UNIT
.
Installing the UT-133 in a transceiver allows you to
use a variety of Bluetooth®devices.
Please read this instructions carefully and complete-
ly before installing the UT-133.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
The Bluetooth®work mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Icom
inc. is under license.
All other products or brands are registered trademarks or trade-
marks of their respective holders.
About the UT-133
The UT-133 is a Bluetooth
®
unit to be installed in a trans-
ceiver to communicate with other Bluetooth
®
devices.
Please refer to the transceiver’s instruction manual for de-
tails regarding installation and use of the UT-133 with the
transceiver.
Precautions
When you use a Bluetooth
®
device, pay attention to follow-
ing:
Bluetooth
®
devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using a transceiver with the UT-133 installed and
turned ON near such devices, interference may occur, caus-
ing a decrease in communication speed, and an unstable
connection.
In such cases, use the transceiver with the UT-133 away
from the other devices, or stop using those devices.
Electromagnetic Interference
The Bluetooth
®
communication range may vary, depending
on the environment in which the device operates. Micro-
wave ovens or wireless LAN may cause an interference.
In that case, stop using those devices or move away the
Bluetooth
®
device from the other devices.
This Bluetooth
®
device has a range of use. If the communi-
cation is unstable, use the device within the range.
Radio operator warnings
s$O NOT USE A TRANSCEIVER WITH THE 54 INSTALLED AND
turned ON near medical equipment, or near a person who
has a pacemaker. Radio waves from the transceiver may
cause interference, or endanger their life.
s$O NOT USE A TRANSCEIVER WITH THE 54 INSTALLED AND
turned ON near microwave ovens. Interference may occur.
s$ONOTMAKEANYCHANGESORMODIlCATIONSTOTHEUNIT
DO NOT put anything on top of the unit, before installing.
DO NOT drop, impact or vibrate the unit, before installing.
This may damage to the unit.
You may not be able to use some Bluetooth
®
device’s func-
tion, even if the unit is installed.
Bluetooth®
UT-133
Transceiver VS-3
Android
®
device
(third party)
Specifications
s"LUETOOTH
®
version: Bluetooth
®
Version 3.0
s4RANSMISSION/UTPUT #LASS
s3UPPORTEDPROlLES (&0(30300
s4HEMAXIMUMNUMBEROFPAIRED"LUETOOTH
®
devices:
8 devices*
*You can pair with up to 8 headsets and
data devices. The 8 paired devices can-
not be all headsets or all data devices.
s$IMENSIONS 7X(X$MM
7X(X$INCH
s7EIGHT GOZAPPROXIMATELY
s$EVICE.AME )COM"4DEFAULTVALUE
s0ASSKEY FOURZEROS
4HE SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR
obligations.
A-7142W-1EX
© 2014 Icom Inc.
+AMIMINAMI(IRANOKU/SAKA*APAN
FCC and IC information
s&/2#,!33"5.).4%.4)/.!,2!$)!4/23
This equipment has been tested and found to comply with
THELIMITSFORA#LASS"DIGITALDEVICEPURSUANTTOPARTOF
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
s2EORIENTORRELOCATETHERECEIVINGANTENNA
s)NCREASETHESEPARATIONBETWEENTHEEQUIPMENTANDRE-
ceiver.
s#ONNECTTHEEQUIPMENTINTOANOUTLETONACIRCUITDIFFER-
ent from that to which the receiver is connected.
s#ONSULT THE DEALER OR AN EXPERIENCED RADIO46 TECHNI-
cian for help.
#!54)/.#HANGESORMODIlCATIONSTOTHISDEVICENOTEX-
pressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.
4HISDEVICECOMPLIESWITH0ARTOF&##AND)NDUSTRY#AN-
ADALICENCEEXEMPT233STANDARDS/PERATIONISSUBJECTTO
the following two conditions: (1) this device may not cause in-
terference, and (2) this device must accept any interference,
including interference that may cause undesired operation
of the device.
This transmitter must not be co-located or operated in con-
JUNCTIONWITHANYOTHERANTENNAORTRANSMITTER
CAN ICES-3 (B)
,EPR£SENTAPPAREILESTCONFORMEAUXLAPARTIEDESRÞGLES
DELA&##ET#.2Dg)NDUSTRIE#ANADAAPPLICABLESAUXAPPAR-
EILSRADIOEXEMPTSDELICENCE,gEXPLOITATIONESTAUTORIS£EAUX
DEUXCONDITIONSSUIVANTESLgAPPAREILNEDOITPASPRODUIRE
de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Cet émetteur ne doit pas être co-localisé ou fonctionner en
CONJONCTIONAVECUNEAUTREANTENNEOU£METTEUR
NMB-3 (B)
s&OR-OBILE5SE
4HIS EQUIPMENT COMPLIES WITH &##)# RADIATION EXPOSURE
limits set forth for an uncontrolled environment and meets
THE &## RADIO FREQUENCY 2& %XPOSURE 'UIDELINES AND
233OFTHE)#RADIOFREQUENCY2&%XPOSURERULES4HIS
equipment has very low levels of RF energy that it deemed
TOCOMPLYWITHOUTMAXIMUMPERMISSIVEEXPOSUREEVALUATION
(MPE).
#ET £QUIPEMENT EST CONFORME AUX LIMITES DEXPOSITION AUX
rayonnements énoncées pour un environnement non contrôlé
ETRESPECTELESRÞGLES LESRADIO£LECTRIQUES 2&DE LA&##
lignes directrices d’EXPOSITIONETDEXPOSITIONAUXFR£QUENC-
es radioélectriques (RF) CNR-102 de l’IC. Cet équipement
£METUNE£NERGIE2&TRÞSFAIBLEQUIESTCONSID£R£ECONFORME
SANS£VALUATIONDELEXPOSITIONMAXIMALEAUTORIS£E
s&OR0ORTABLE5SE
4HIS EQUIPMENT COMPLIES WITH &##)# RADIATION EXPOSURE
limits set forth for an uncontrolled environment and meets
THE &## RADIO FREQUENCY 2& %XPOSURE 'UIDELINES AND
233OFTHE)#RADIOFREQUENCY2&%XPOSURERULES4HIS
equipment has very low levels of RF energy that are deemed
TOCOMPLYWITHOUTTESTINGOFSPECIlCABSORPTIONRATIO3!2
#ET £QUIPEMENT EST CONFORME AUX LIMITES DEXPOSITION AUX
rayonnements énoncées pour un environnement non contrôlé
ETRESPECTE LESRÞGLES LESRADIO£LECTRIQUES 2&DE LA&##
lignes directrices d’EXPOSITIONETDEXPOSITIONAUXFR£QUENCES
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet
UNE£NERGIE2&TRÞSFAIBLEQUIESTCONSID£R£ECONFORMESANS
£VALUATIONDUD£BITDABSORPTIONSP£CIlQUE$!3
Versions of the UT-133 which display the “CE”
symbol on the serial number label, comply with
the essential requirements of the Radio and
Telecommunications Terminal Equipment Di-
RECTIVE%#ANDTHERESTRICTIONOFTHE
use of certain hazardous substances in electri-
CALANDELECTRONICEQUIPMENT$IRECTIVE
EU.
You can get the DOC (Declaration Of Conformity) from your
nearest Icom dealer. See the Icom website for details of your
nearest dealer.
HTTPWWWICOMCOJPWORLD
About CE
After installing the UT-133, place the FCC/IC ID label on the
outside of the transceiver.
Other Icom Transceiver manuals
