ICP DAS USA iWSN-2200-E User manual

Technology support：[e-mail] P1
iWSN-2200-E Quick Start
v1.00, Mar. 2019
What’s in box
Without “Quick Start”, The package includes the following items:
iWSN-2200-E
(includes antenna)
Screw Driver
(1C016)
1 Appearance
Number
Instructions
1
LED indicators
2
Antenna connector
(type RP-SMA)
3
Rotary switch of
Communication
parameter setting
4
Terminal and
Ethernet port
(RJ-45 interface)
5
DIP switch of
operation mode
○
1
○
2
○
3
○
4
○
5

Technology support：[e-mail] P2
2 Pin assignments
3 Communication Parameter
Rotary
switch
Instructions
RF
Channel
0 ~ F = ch 0 ~ ch F
Group
ID
0 ~ 7 = GID 0 ~ GID 7
8 ~ F = Reserved, fix GID 0
Number
Name
Instructions
3
+Vs
+10V~+30VDC
2
GND
Ground
1
F.G.
Shield ground
Switch
Instructions
Init
Initial mode
Run
Run mode

Technology support：[e-mail] P3
4 LED indicators
The module provides three LED indicators, including power, wireless
transmission and wireless reception status. The table below will show
the LED status indicator.
Indicator
Status
Instructions
PWR
ON
Power on
OFF
Power off
RF_Tx
ON
Wireless data has
been transmitted
OFF
No data be transmitted
RF_Rx
ON
Wireless data has
been received
OFF
No data be received
5 Connecting power and computer to module
A. Confirm the Ethernet setting of your computer is correct and be
worked. Confirm both firewalls of Windows and Anti-virus has closed
or correct setting in your computer to avoid “Search Servers”
function in chapter 6 can’t search to iWSN-2200-E. (Please conform
to your administrator)
B. Connecting iWSN-2200-E and computer to same Hub/Switch or
same sub network.
C. Confirm the Init/Run switch of module to Run position, and adjust the
RF channel and Group ID switch to same with iWSN-1110X series.
D. Supplying power (+10~+30VDC) to iWSN-2200-E.

Technology support：[e-mail] P4
6 Configuring the correct network parameter
There are two methods to configure network parameter, the user can
use eSearch Utility or browser as below.
一、 Using eSearch Utility software:
A. Installing eSearch Utility, the user can download
from ICP DAS website as below link:
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/
B. Double click the eSearch Utility shortcut icon in desktop.
C. Click “eSearch Servers” button to search your iWSN-2200-E.
D. Double click your iWSN-2200-E to open “Configure Server
(UDP)” configuration dialog.
Power supply
iWSN-2200-E
F.G. GND +Vs
Ethernet
Hub/Switch
Computer

Technology support：[e-mail] P5
The factory default values of iWSN-2200-E as below table:
IP Address
192.168.255.1
Sub-net Mask
255.255.0.0
Gateway
192.168.0.1
E. Contacting your network administrator, and get correct network
configuration (ex: IP/Mask/Gateway). Key in the network
configuration (IP/Mask/Gateway), and then click “OK” button.
Note: iWSN-2200-E will use new setting after 2 seconds.
A
B
C
D

Technology support：[e-mail] P6
F. After 2 seconds, click “eSearch Servers” to search
iWSN-2200-E, and confirm the network configuration of previous
step whether be correct set.
二、 Using browser
E
F
Note: If your using browser is Internet Explorer, in order to
ensure the web server of iWSN-2200-E can display properly,
please be sure to close the IE cache first, the step as below:
(If your using browser isn’t Internet Explorer, please skip these
steps.)
Step1：In the IE browser menu, click ”Tools (T)” “Internet
Options (O)”.
Step2：After entry the option box, click “General” tab, and then
click ”Settings (S)” button in the browsing history record to
entry network data setting box.
Step3：In the “Temporary Internet Files” label, click “Every
visit to the page (E)”, and then click “OK” button to finish
setting.

Technology support：[e-mail] P7
A. After key in password in Login password field, click “Submit”
button.
B. After click “Network” item, the web will display IP Address
Selection page. Key in network configurations (IP/Mask/Gateway),
and click “Update Setting” button.
C. After click “Port1” item, the web will display Setting page. Key in
Port number, and click “Submit” button.
A
Default password：
admin
B
C

Technology support：[e-mail] P8
7 Self-Test
A. The eSearch Utility in chapter 6 have supply a test software, the
user can click “Tools” ”Modbus TCP Master” to open
Modbus TCP Master Utility.
B. Key in the IP address of iWSN-2200-E in Modbus TCP Master, and then
click ”Connect” button to connect iWSN-2200-E.
C. Key in Modbus command such as: 1 2 0 0 0 6 1 3 0 1 0 1 in command
field, and then click “Send command” button.
D. If the response messages such as 01 03 02 08 98 is correct, and the 08
98 is mean as 0x0898 (Hexadecimal) = 2200 (Decimal) that mean test
successfully.
A
B
C
D