iDPRT iX4P User manual

-1- -2-Rev.1.0
Packing List
iX4P
iX4E
Quick Start Guide
Xiamen Hanin Electronic Technology Co.,Ltd.
ADD:
TEL:
WEB:
5F, 8#, Gaoqi Nan Shi’er Road, AideAirport Industrial Park,
Xiamen, Fujian, China
[phone]
www.idprt.com
Printer Power Cord USB Cable
Label Roll Ribbon
Quick Start Guide
Quick Start Guide
！Note: The packing materials are actually based on the order.
Appearance and Components
Appearance and Components
Front View Rear View
Note: The views above are for your reference. Ports vary by your choice.
！
⑪
Lock
Unlock
Arrow mark for Lock or Unlock
Media Guide Lock
Powrer Switch AC Power Port
Ethernet Port USB B-type
Serial Port
USB HostParallel Port
Inside View（Take iX4E for example）
⑦
①
②
④
⑫
⑥
③
⑩
Print Mechanism
⑤
⑭
⑨
⑬













-3-

Media Sensor
Cover Assembly
Cover Openning
Control Panel
Display
USB Host 
iX4E Control Panel
iX4P Control Panel
①
②
③
④
⑤
⑥⑦
①
②
③
④
⑤
⑥
⑦
IX4P/E User Manual



task
Only can be used with the display

Start Label Learning
Feed
Pause

Menu
⑧


-4- -4-
Loading the Roll Loading the Ribbon
Rev.1.0
1. 
cover 
by hands.
3. Pull a part of ribbon, then pass the ribon
between the print mechanism
and the
media sensor.
4. Pass the ribbon over the print mechanism
and the ribbon take-up spindle, and then
wrap it serveral turns around the ribbon
take-up spindle.
！Note: Please refer to windows driver installa�on in iX4 Series User Manual.
1
2
Varies by regions
2.Connect the other end of power cord to the AC
power port.
1.Connect the power plug to power receptacle.
Power Cord
Loading the Ribbon

Clockwise
2. Load the out side ink ribbon into ribbon
supply spindle, 

-6-
-5-
2. Mount a label roll onto the media spindle. Be sure to push the roll all the way aligned
the inner wall of the printer. guide back on
the media spindle. Then rotate lock

3. 
it reaches  apart to adjust for the label
width.
Loading the Paper
5.the print head lever to make ribbon and label 
snugly.
1. Rotate the arrow mark that locates in media guide lock of media spindle to unlocking
, then remove the media guide.
4. When using the gap label, black mark label or punch hole label, you can manually adjust

.
Media Sensor 
Connec�ng the Power
Loading the Paper


Ribbon
Print mechanism
Media Sensor
Ribbon Take-up Spindle