IDTECH Xpress CM100 Instruction Manual

1
FCCID:WQJ-IDCA-12X1
OperationGuidelines
Xpress CM100 Reader

2
1. Scope
Thisdocumentdescribes theoperationguidelinesofxpressreader for EMCtest.Thisdocument
answeredfourquestionsasbelowshows.
1) How toinstallXpressReder.
2) How touseXpressReaderfor EMC test
Howtoinstall XpressReader
pleaseinstall thereaderasthesesteps:
1. PlugCable ConnectortoPC.Likepicture1Ashow.
2.

3
3. PlugPower connector (C)toRS232 Cable powerconnector(e),

4
4.PlugtheAC-Adapter nto AC100~240V ,thenXpress readercanwork.

5
2. Howtouse XpressReader
Afterpower on Xpress Reader andreader wasconnect withPC, thenusercouldreadany
PaypassMagstripecardor VisaMSD Card.Theoperate steps:
NowtheCardinboxisdemocardwhichcanbeusedfortest.
1. opernthePayPass Reader 10.4.exe

6
2.clickthe CarrierON ”,thenthedemo cardcanbetested.PutthecardonXpress
reader.
Changethe loop”numberto1000,thenclickthe WUPA”,Data windowswillshow
0400”
If wanttostop running,youcanclickthe stop ”,ifwanttoruncontinue,thenclick
The start”buttom

7
FCCComplianceand AdvisoryStatement
This devicecomplieswithPart 15 ofthe FCC rules. Operationis subject tothefollowing two
conditions:(1)thisdevicemaynot causeharmfulinterference,and(2)this devicemust accept
anyinterferencereceived,includinginterferencethatmaycauseundesired operation.
This equipmenthasbeentestedandfound tocomplywiththelimits foraClass Bdigitaldevice,
accordingtoPart15ofthe FCC rules.Theselimits aredesigned toprovidereasonable
protectionagainst harmfulinterferencein aresidentialinstallation.This equipmentgenerates,
usesand can radiateradiofrequencyenergyand if notinstalled andused inaccordancewith
the instructions,maycauseharmfulinterferencetoradio communications. However,there is
no guarantee thatinterferencewillnotoccurinaparticular installation.Ifthisequipmentdoes
causeharmfulinterferencetoradio or televisionreception,whichcanbedeterminedbyturning
the equipment off and on, theuser isencouragedtotrycorrectthe interferencebyoneormore
of thefollowingmeasures:
1.Reorientthereceiving antenna.
2.Increasethe separation betweentheequipmentand receiver.
3.Connect theequipmentintoand outlet on acircuitdifferentfromthattowhichthe receiver is
connected.
4.Consultthe dealer oranexperienced radio/TVtechnicianfor help.
Anyspecial accessoriesneededfor compliancemustbe specifiedintheinstruction manual.
Warning: Ashielded-typepower cord is required in ordertomeetFCC emissionlimitsand
alsotopreventinterferencetothe nearbyradioand television reception.It isessentialthat
onlythesuppliedpowercord be used. Useonlyshieldedcablestoconnect I/Odevicestothis
equipment.
CAUSION: Anychanges or modificationsnotexpresslyapproved bythepartyresponsible for
compliancecouldvoidyourauthoritytooperatetheequipment.
ICstatementThisClass BdigitalapparatuscomplieswithCanadianICES-003.Cetappareilnum rique
delaclasseBestconforme àlanormeNMB-003 duCanada.
FCC ID:WQJ-IDCA-12X1