IEI Technology IOVU-430M User manual

IOVU-430M Panel PC
Page i
IEI Technology Corp.
User Manual
MODEL:
IOVU-430M
Panel PC, 4.3" Touch Screen, 416 MHz Marvell XScale PXA270,
Fast Ethernet, USB, Mini SD, CAN bus, RS-232/422/485
RoHS Compliant, Front Panel IP 65 Protection
Rev. 1.01 – 6 December, 2010

IOVU-430M Panel PC
Page ii
Revision
Date Version Changes
6 December, 2010 1.01 Modified system mounting method
17 September, 2010 1.00 Initial release

IOVU-430M Panel PC
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

IOVU-430M Panel PC
Page iv
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 BENEFITS ................................................................................................................... 2
1.3 FEATURES................................................................................................................... 3
1.4 FRONT PANEL............................................................................................................. 3
1.5 CONNECTOR PANEL.................................................................................................... 4
1.6 DIMENSIONS............................................................................................................... 5
1.7 POWER SUPPLYAND BATTERY.................................................................................... 6
1.8 MODEL VARIATIONS ................................................................................................... 6
1.9 TECHNICAL SPECIFICATIONS ...................................................................................... 7
1.10 CERTIFICATIONS ....................................................................................................... 8
2 UNPACKING................................................................................................................. 9
2.1ANTI-STATIC PRECAUTIONS...................................................................................... 10
2.2 UNPACKING PRECAUTIONS....................................................................................... 10
2.3 UNPACKING CHECKLIST............................................................................................11
2.4 OPTIONAL ITEMS.......................................................................................................11
3 INSTALLATION ......................................................................................................... 12
3.1 INSTALLATION PRECAUTIONS................................................................................... 13
3.2 MINI SD CARD INSTALLATION ................................................................................. 13
3.3 EXTERNAL PERIPHERAL INTERFACE CONNECTORS................................................... 14
3.3.1 12 V~36 V DC Terminal Block......................................................................... 15
3.3.2 GPIO and CAN bus Connector........................................................................ 15
3.3.3 RS-232/422/485 Serial Port............................................................................. 16
3.3.3.1 Connecting the Serial Port........................................................................ 16
3.3.3.2 RS-232/422/485 Selection........................................................................ 17
3.3.3.3 Pinouts....................................................................................................... 18
3.3.4 USB Connector ................................................................................................ 19
3.3.5 Ethernet Connector.......................................................................................... 19
3.4 IN-WALL MOUNTING................................................................................................ 21

IOVU-430M Panel PC
Page v
3.5 SOFTWARE................................................................................................................ 23
3.5.1 Wireless AP ...................................................................................................... 23
A CERTIFICATIONS .................................................................................................... 26
A.1 ROHS COMPLIANT.................................................................................................. 27
A.2 IP65 COMPLIANT FRONT PANEL ............................................................................. 27
B SAFETY PRECAUTIONS......................................................................................... 28
B.1 SAFETY PRECAUTIONS............................................................................................. 29
B.1.1 General Safety Precautions............................................................................. 29
B.1.2 Anti-static Precautions .................................................................................... 30
B.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 30
B.2.1 Maintenance and Cleaning.............................................................................. 30
B.2.2 Cleaning Tools................................................................................................. 31
B.3 FCC PRECAUTIONS ................................................................................................. 32
C HAZARDOUS MATERIALS DISCLOSURE......................................................... 33
C.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY....................................... 34

IOVU-430M Panel PC
Page vi
List of Figures
Figure 1-1: IOVU-430M ...................................................................................................................2
Figure 1-2: Front Panel ..................................................................................................................3
Figure 1-3: IOVU-430M Peripheral Connectors ...........................................................................4
Figure 1-4: IOVU-430M Physical Dimensions (millimeters) .......................................................5
Figure 3-1: Mini SD Card Installation..........................................................................................13
Figure 3-2: IOVU-430M Peripheral Connectors .........................................................................14
Figure 3-3: Power Terminal Block...............................................................................................15
Figure 3-4: GPIO and CAN Bus Terminal Block........................................................................16
Figure 3-5: Serial Device Connector...........................................................................................17
Figure 3-6: COM1 mode setting ..................................................................................................17
Figure 3–7: Serial Port Pinouts...................................................................................................18
Figure 3-8: USB Connector..........................................................................................................19
Figure 3-9: LAN Connection........................................................................................................20
Figure 3-10: Ethernet Connector.................................................................................................21
Figure 3-11: Chassis Support Screws........................................................................................22
Figure 3-12: In-wall Cage Screw Holes.......................................................................................22
Figure 3-13: In-wall Mounting......................................................................................................23

IOVU-430M Panel PC
Page vii
List of Tables
Table 1-1: IOVU-430M Specifications ...........................................................................................6
Table 1-2: Technical Specifications..............................................................................................8
Table 2-1: Package List Contents...............................................................................................11
Table 2-2: Optional Items.............................................................................................................11
Table 3-1: External Interface Connectors...................................................................................14
Table 3-2: 12~36 V Power Connector Pinouts...........................................................................15
Table 3-3: GPIO and CAN Bus Connector Pinouts ...................................................................16
Table 3-4: RS-232 Pinouts ...........................................................................................................18
Table 3-5: USB Connector Pinouts.............................................................................................19
Table 3-6: Ethernet Connector Pinouts......................................................................................20
Table 3-7: Ethernet Connector LEDs..........................................................................................21

IOVU-430M Panel PC
Page 1
Chapter
1
1 Introduction

IOVU-430M Panel PC
Page 2
1.1 Overview
Figure 1-1: IOVU-430M
The IOVU-430M Panel PC comes with a 4.3" touch panel screen. It is powered by a
416 MHz Marvell XScale PXA270 processor and has 128 MB of SDRAM.
The IOVU-430M includes a Mini SD card with Windows CE 5.0 installed. The package
also includes a software development kit and documentation to help easily customize the
operating system according to needs.
The IOVU-430M is an extremely low power Panel PC. The system is fanless, which allows
quiet and reliable operation.
Connection to a variety of peripheral devices and networks is provided through a USB port,
a RS-232/422/485 serial port, and an Ethernet port. A CAN (Controller-Area Network)
bus connection allows the IOVU-430M to be used in a wide range of automotive and
industrial settings.
1.2 Benefits
Some of the IOVU-430M benefits include:
Customizable operating system to suit application needs.
Less downtime from overheating because there are not fans to fail
Cost savings with low power consumption
Easy installation with a wide range of input voltages supported

IOVU-430M Panel PC
Page 3
Can handle tough environments because of solid-state storage and IP64
protection of the front cover
1.3 Features
The IOVU-430M features are listed below:
416 MHz Marvell XScale PXA270 processor
128 MB of SDRAM
One Fast Ethernet port
One USB 1.1 port
One RS-232/422/485 serial communication connection
One GPIO and CAN bus connection
Projected capacitor multi-touch panel or 4-wire resistive single-touch panel
12-36 VDC input
RoHS compliant
1.4 Front Panel
The IOVU-430M front panel (Figure 1-2) comprises a 4.3" TFT WQVGA color touch
screen LCD in an ABS+PC plastic frame.
Figure 1-2: Front Panel

IOVU-430M Panel PC
Page 4
1.5 Connector Panel
The external peripheral interface connectors are located on the bottom and side panels of
the IOVU-430M . The peripheral interface connectors are shown in Figure 1-3.
Figure 1-3: IOVU-430M Peripheral Connectors
External peripheral interface connectors on the IOVU-430M include:
1 x CAN bus connector
1 x DC-IN terminal block
1 x GPIO connector
1 x RJ-45 LAN connector
1 x RS-232/422/485 connector
1 x mini SD card slot
1 x USB 1.1 connector

IOVU-430M Panel PC
Page 5
1.6 Dimensions
The physical dimensions of the IOVU-430M are shown in Figure 1-4 and listed below:
Width: 145 mm
Height: 104 mm
Depth: 34 mm
Figure 1-4: IOVU-430M Physical Dimensions (millimeters)

IOVU-430M Panel PC
Page 6
1.7 Power Supply and Battery
WARNING:
Whenever you need to remove a part for maintenance or upgrading,
switch off the power supply and unplug the power cord first.
And Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions
The IOVU-430M has a terminal block connector on the bottom panel.
1.8 Model Variations
The IOVU-430M is available in the following model variations.
Model No. Touch Panel Type Wi-Fi
IOVU-430M-CE5/MT/-R10 Projected-capacitor multi-touch No
IOVU-430M-CE5/MT/WL/-R10 Projected-capacitor multi-touch 802.11b/g
IOVU-430M-CE5/ST/-R10 4-wired resistive single-touch No
IOVU-430M-CE5/ST/WL/-R10 4-wired resistive single-touch 802.11b/g
Table 1-1: IOVU-430M Specifications

IOVU-430M Panel PC
Page 7
1.9 Technical Specifications
The IOVU-430M technical specifications are listed in Table 1-2.
Specifications
System
CPU 416 MHz Marvell XScale PXA270 processor
Memory
2 MB boot ROM
128 MB of SDRAM
1 GB Mini SD card
Real-time Clock Battery backup RTC
Watchdog Timer Software programmable supports 1~255 sec. system reset
Display
Display Type TFT LCD screen
Display Size 4.3"
Resolution 480 x 272, 262,000 colors
Video Support MPEG1
Brightness 400 cd/m2
Backlight MTBF 10,000 hrs
Pixel Pitch (mm) 0.066(H) x 0.198(V)
Viewing Angle (H-V) 100 / 60
Touch Panel Projected-capacitor multi-touch (IOVU-430M-CE5/MT/-RT10)
4-wired resistive single-touch (IOVU-430M-CE5/ST/-RT10)
I/O and Communications
Ethernet 1 x 10/100 Mb/s
CAN bus 1 x 3-pin terminal block CAN bus (CAN specification 2.0b)
GPIO 1 x 8-pin GPIO terminal block connector
Serial Ports 1 x RS-232/422/485
USB Interfaces 1 x USB 1.1

IOVU-430M Panel PC
Page 8
Specifications
Audio 2 x 1.5 Watt speakers
Power
Power Supply 12-36 VDC
Power Consumption 7 W
Environmental and Mechanical
Operating Temperature Minimum: -20ºC (-4°F)
Maximum: 50°C (140°F)
Humidity 5%RH to 90%RH (non-condensing)
Vibration
Operating Random Vibration Mode (MIL-STD-810F 514.5C-3)
1.Axes: 3 axes (Vertical / Transverse / Longitudinal).
2.10-500 Hz, 60min/axis.
3.Equivalent to Z:2.18 Grms X:1.6 Grms Y:1.96 Grms
Front Panel Color Pantone Black C
Physical Dimensions 145 mm x 104 mm x 34 mm
Net Weight 0.7 kg
Ingress Protection IP 65 compliant front panel
Table 1-2: Technical Specifications
1.10 Certifications
All IOVU-430M series models comply with the following international standards:
RoHS
IP 65 compliant front panel
For a more detailed description of these standards, please refer to Appendix A.

IOVU-430M Panel PC
Page 9
Chapter
2
2 Unpacking

IOVU-430M Panel PC
Page 10
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the IOVU-430M and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-430M. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IOVU-430M or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the IOVU-430M, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
IOVU-430M.
2.2 Unpacking Precautions
When the IOVU-430M is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.
Make sure the packing box is facing upwards so the IOVU-430M does not fall
out of the box.
Make sure all the components shown in Section 2.3 are present.

IOVU-430M Panel PC
Page 11
2.3 Unpacking Checklist
NOTE:
If some of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the IOVU-430M from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to [email protected].
The IOVU-430M is shipped with the following components:
Quantity Item and Part Number Image
1 IOVU-430M
1 Utility CD including SDK, utilities, and
technical documentation
1 Null modem cable
1 Touch pen
Table 2-1: Package List Contents
2.4 Optional Items
Item and Part Number Image
12V DC 60W power adapter with terminal block
connector, 90-264V AC input
63000-FSP0601AD101C760-RS
Table 2-2: Optional Items

IOVU-430M Panel PC
Page 12
Chapter
3
3 Installation

IOVU-430M Panel PC
Page 13
3.1 Installation Precautions
During installation, be aware of the precautions below:
Read the user manual: The user manual provides a complete description of
the IOVU-430M, installation instructions and configuration options.
DANGER! Disconnect Power: Power to the IOVU-430M must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the IOVU-430M is opened while the power cord is still connected
to an electrical outlet.
Qualified Personnel: The IOVU-430M must be installed and operated only
by trained and qualified personnel. Maintenance, upgrades, or repairs may
only be carried out by qualified personnel who are familiar with the associated
dangers.
Grounding: The IOVU-430M should be properly grounded. The voltage feeds
must not be overloaded. Adjust the cabling and provide external overcharge
protection per the electrical values indicated on the label attached to the back
of the IOVU-430M.
3.2 Mini SD Card Installation
The IOVU-430M supports a Mini SD card. Follow the steps below to install a Mini SD card.
Step 1: Slide the Mini SD card into the slot. Step 0:
Figure 3-1: Mini SD Card Installation