2
Contents
1 Preliminary note....................................................................................................3
1.1 Symbols used.................................................................................................3
2 Safety instructions ................................................................................................3
3 Functions and features.........................................................................................4
4 Function................................................................................................................4
4.1 Communication, parameter setting and evaluation ........................................4
4.2 Switching function ..........................................................................................5
5 Installation ............................................................................................................5
6 Electrical connection.............................................................................................6
7 Operating and display elements...........................................................................7
8 Menu.....................................................................................................................8
8.1 Menu structure ...............................................................................................8
8.2 Explanation of the menu.................................................................................9
9 Parameter setting ...............................................................................................10
9.1 General parameter setting............................................................................10
9.2 Configuration of the display (optional)..........................................................12
9.3. Setting of the output signals ........................................................................12
9.3.1 Setting of the output function...............................................................12
9.3.2 Setting of the switching limits ..............................................................12
9.4 User settings (optional) ................................................................................12
9.4.1 Setting the measurement method .......................................................12
9.4.2 Zero point calibration...........................................................................13
9.4.3 Setting the switching delays ................................................................13
9.4.4 Setting of the error behaviour of the outputs .......................................13
9.4.5 Setting of the switching logic for OUT1 ...............................................13
9.5 Service functions ..........................................................................................13
9.5.1 Reading of the min/max values for the system temperature ...............13
9.5.2 Reset of all parameters to factory setting............................................13
10 Operation..........................................................................................................14
10.1 Reading of the set parameters ...................................................................14
10.2 Fault indication ...........................................................................................14
