iHealth BP5 User manual

Wireless Blood Pressure Monitor (BP5)
QUICK START GUIDE
EN
Download the Free iHealth MyVitals App
For iOS devices: Prior to first use,
download and install "iHealth MyVitals"
from the Apple App Store.
For Android devices: Prior to first use,
download and install "iHealth MyVitals"
from the Google Play Store.
Follow the on-screen instructions to
register and set up your personal account.
Access the iHealth Cloud Account
Your iHealth account also gives you access
to the free and secure iHealth cloud
service. Go to www.ihealthlabs.com and
click "Sign In" for access once your
account has been created.
First Time Set Up Instructions

Connect to iOS device via Bluetooth
• Put on the monitor or press the START/STOP button, the Bluetooth
indicator will begin flashing.
• Turn Bluetooth "On" under the "Settings" menu on the iOS device.
• Wait until the model name printed on the monitor, (i.e. "BP5 xxxxxx")
and "Not Paired" appear in the Bluetooth menu, and select the
model name "BP5 xxxxxx" to pair and connect. The Bluetooth
indicator will remain steady upon successful connection. When
using the monitor for the first time, it may take up to 30 seconds
for your iOS device to detect the Bluetooth signal.
• Each subsequent time you use the monitor, "Connected" will be
displayed next to "BP5 xxxxxx" in the Bluetooth Menu.
• Launch the "iHealth MyVitals"app to start using your monitor.
• Please repeat these steps when you switch to another iOS
device with the Monitor.
Charge Battery Before First Use
Connect the monitor to a USB port using the charging cable provided
until the green indicator light stabilizes.

Waiting to connect Flashing blue light
Connected and measuring Steady blue light
Measurement completed and
ready to disconnect
Gradually extinguishing light
Monitor Status Bluetooth Indicator
MEASUREMENT PROCEDURES
Blood pressure can be affected by the position of the cuff and your
physiologic condition. It is very important that the cuff should be
placed at the same level as your heart.
Body Posture
Sitting Comfortably During Measurement
a. Sit with your feet flat on the floor without crossing your legs.
b. Place your hand palm-side up in front of you on a flat surface such
as a desk or a table.
c. The center of the cuff should be at your heart level.
Connect to Android Device via Bluetooth
• Put on the monitor or press the START/STOP button, the
Bluetooth indicator will begin flashing.
• Turn Bluetooth "On" under the "Settings" menu on the Android
device.
• When using the monitor for the first time, you should pair the
monitor to the Android device. Wait until the model name printed
on the monitor, (i.e. "BP5 xxxxxx") appears in the Bluetooth
menu,and select the model name "BP5 xxxxxx" to pair. it may
take up to 30 seconds for your Android device to detect the
Bluetooth signal.
• Launch the “iHealth MyVitals” app to start using your monitor.
• Please repeat these steps when you switch to another Android
device with the monitor.

up
Down
1/2”(1-2cm)
ON/OFF
i
H
e
a
l
t
h
Remember to:
1. Make sure that the appropriate cuff size is used; refer to the cuff
circumference range in the Specifications section of this manual.
2. Measure on the same arm each time.
3. Stay still during a measurement. Do not move your arm, body or
the monitor.
Apply the Cuff
a. Pull the cuff end through the metal loop, positioning it outward
(away from your body).
b. Place a bare arm through the cuff with the red arrow facing up and
position the cuff 1/2"(1-2cm) above the elbow joint.
c. Tighten the cuff by pulling it towards your body, securing it closed
with the Velcro fastener.
d. While seated, place your hand, palm-side up, in front of you on a flat
surface such as a desk or table. Position the monitor in the middle
of your arm so that it is aligned with your middle finger.
e. The cuff should fit comfortably, yet snugly around your arm. You
should be able to insert one finger between your arm and the cuff.
Lying Down During Measurement
a. Lie on your back.
b. Place your arm straight along your side with your hand palm-side up.
c. The cuff should be level with your heart.

4. Stay still and calm for one to one and half minutes before taking
a blood pressure measurement. Prolonged over-inflation of the
cuff may cause bruises on your arm.
Press the "START/STOP" button at any time to interrupt a measurement.
Press the "START/STOP" button for 2 seconds to turn off the monitor
manually.
Auto Connect Option
The auto connect option allows the monitor to find the last used
mobile device and re-establish the connection automatically. The auto
connect option can be enabled in the App.
Taking Measurements with mutiple iOS/Android devices
Turn off the Bluetooth of the last used iOS/Android device if the Auto
Connect option is enabled in your App, then follow the Set Up
Instructions in the Quick Start Guide.
Measuring without an iOS/Android Device
Enable the Offline Measurement function on the App. Apply the cuff,
follow the "Measurement Procedures", and then press the
"START/STOP" button to begin measurement. All offline measure-
ments will be uploaded to the App automatically upon the next
successful Bluetooth connection.
For answers to frequently asked questions, please visit
www.ihealthlabs.com
Note: Physical activity, eating, drinking, smoking, excitement, stress,
and many other factors influence blood pressure results.
Visit www.ihealthlabs.com to obtain additional product information.
For Customer Service email [email protected] or call
[phone]