Iluminarc IP Series User manual

I
Il lu um mi ip po od d I In ng gr ro ou un nd d I IP P S Se er ri ie es s
User Manual

Edition Notes
Ilumipod Inground IP Series User Manual
Edition Notes
The Ilumipod Inground IP Series User Manual Rev. 01f covers the description, safety precautions, installation,
programming, operation, and maintenance of the Ilumipod Inground 36 IP RGB, Ilumipod Inground 36 IP VW,
and Ilumipod Inground Tri-12 IP products. ILUMINARC
®
released this edition of the Ilumipod Inground IP Series
User Manual Rev. 01f in July 2011.
Trademarks
The ILUMINARC
®
logo, the ILUMINARC
®
name, and all other trademarks in this document related to services
or products by ILUMINARC
®
are trademarks owned or licensed by ILUMINARC
®
, its affiliates, or subsidiaries.
Any other product names, logos, brands, company names, or trademarks featured or referred to within this
document are the property of their respective trademark holders.
Copyright Notice
The entire content of this document, except where applicable and unless otherwise noted, is solely owned by
ILUMINARC
®
, a wholly owned trademark of CHAUVET & Sons Inc.
© Copyright 2011 ILUMINARC
®
All rights reserved.
Electronically published by ILUMINARC
®
in the United States of America.
Manual Usage
ILUMINARC
®
authorizes its customers to download and print this manual for professional information purposes
only. ILUMINARC
®
expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches), double sided. If using A4
paper (210 x 297 mm), configure your printer to scale the content of this document to A4 paper.
Intended Audience
Any person in charge of installing, operating, and/or maintaining any of these products should read the Guide
that shipped with it and this manual in their entirety before installing, operating, or maintaining the product.
Disclaimer
ILUMINARC
®
believes that the information contained in this manual is accurate in all respects. However,
ILUMINARC
®
assumes no responsibility for any error or omissions in this document. ILUMINARC
®
reserves the
right to revise this document and to make changes from time to time in the content hereof without obligation of
ILUMINARC
®
to notify any person or company of such revision or changes. This does not constitute in any way
a commitment by ILUMINARC
®
to make such changes. ILUMINARC
®
may issue a revision of this manual or a
new edition of it to incorporate such changes.
ILUMINARC
®
Publications Hot Line
If you have any comments about the accuracy of this document or general suggestions regarding how we can
improve it, please call us at [phone]. You can download the latest versions of all ILUMINARC
®
products’
manuals from www.iluminarc.com.
Document Revision
The Ilumipod Inground IP Series User Manual Rev. 01f supersedes all previous versions of this manual. Please
discard any older versions of this manual you may have, whether in printed or electronic format, and replace
them with this version.

Table of Contents
Ilumipod Inground IP Series User Manual (Rev. 02 ) i
Table of Contents
1. Introduction......................................................................................................1
What is in the Box ........................................................................................................ 1 
Unpacking Instructions................................................................................................. 1 
Text Conventions ......................................................................................................... 1 
Safety Notes................................................................................................................. 2 
Personal Safety...................................................................................................................2
Installing ..............................................................................................................................2
Power and Wiring................................................................................................................2
Operation.............................................................................................................................2
2. Product Description ........................................................................................3
Common Features........................................................................................................ 3 
Ilumipod Inground 36 IP VW Features.................................................................................3
Ilumipod Inground 36 IP RGB Features...............................................................................3
Ilumipod Inground Tri-12 IP Features..................................................................................3
Product Dimensions..................................................................................................... 4 
3. Installation........................................................................................................5
Installation Notes.......................................................................................................... 5 
Installation Sleeve Orientation.............................................................................................5
Installation Sleeve Setup.....................................................................................................5
Beam Angle Adjustment......................................................................................................6
AC Power ..................................................................................................................... 7 
Input Voltage and Frequency...............................................................................................7
Power Consumption............................................................................................................7
Junction Box Wiring...................................................................................................... 7 
Power Wiring.......................................................................................................................7
Signal Wiring .......................................................................................................................8
External Wiring............................................................................................................. 8 
Power Distribution ...............................................................................................................8
Signal Distribution................................................................................................................8
Controllers.................................................................................................................... 9 
DMX Controller....................................................................................................................9
ILUMICON...........................................................................................................................9
Ilumicode...........................................................................................................................10
4. Operation........................................................................................................11
Ilumicode.................................................................................................................... 11 
Ilumicode Panel Description..............................................................................................11
Menu Map .................................................................................................................. 11 
White Functions Menu Map...............................................................................................11
RGB Functions Menu Map ................................................................................................12
Programming.............................................................................................................. 13 
DMX Personality................................................................................................................13
DMX Starting Address.......................................................................................................13
Dimmer..............................................................................................................................13
ILUMICON Control ............................................................................................................14
Static Color........................................................................................................................14
Color Calibration................................................................................................................14
Color..................................................................................................................................14
Reset.................................................................................................................................14
DMX Values ............................................................................................................... 15 
ARC 1................................................................................................................................15
ARC 1 + D.........................................................................................................................15
ARC FULL.........................................................................................................................15
SPECIAL 1 ........................................................................................................................16
VW.....................................................................................................................................16
VW + D..............................................................................................................................16

Table of Contents
ii Ilumipod Inground IP Series User Manual (Rev. 02)
SOLID................................................................................................................................16
5. Technical Information ...................................................................................17
Product Maintenance ................................................................................................. 17
Product Repairs.......................................................................................................... 17
Troubleshooting Guide............................................................................................... 18
Exploded View............................................................................................................ 19
Photometrics .............................................................................................................. 20
Ilumipod Inground 36 IP 15º VW .......................................................................................20
Ilumipod Inground 36 IP 30º VW .......................................................................................21
Ilumipod Inground 36 IP 15º RGB .....................................................................................22
Ilumipod Inground 36 IP 30º RGB .....................................................................................23
Ilumipod Inground Tri-12 IP 16º.........................................................................................24
LED Disclaimer........................................................................................................... 25
LED Life.............................................................................................................................25
LED Binning.......................................................................................................................25
Color Rendering Index (CRI).............................................................................................25
Returns Procedure..................................................................................................... 26
Claims......................................................................................................................... 26
Contact Us.................................................................................................................. 26
Technical Specifications............................................................................................. 27
Ilumipod Inground 36 IP VW..............................................................................................27
Ilumipod Inground 36 IP RGB............................................................................................28
Ilumipod Inground Tri-12 IP...............................................................................................29

Introduction
Ilumipod Inground IP Series User Manual (Rev. 02) 1
1. Introduction
This icon
indicates useful,
although non-
critical information.
This icon
indicates
important
installation or
configuration information.
Failure to comply with this
information may prevent
the product from
functioning correctly.
This icon
indicates critical
installation,
configuration, or operation
information. Failure to
comply with this
information may render
the product partially or
completely inoperative,
damage third-party
equipment, or cause harm
to the user
The term “DMX”
used throughout
this document
refers to the USITT
DMX512-A transmission
protocol.
What is in the Box
One Ilumipod Inground IP product (36 IP RGB, 36 IP VW, or Tri-12 IP)
Warranty Card
Quick Reference Guide
Unpacking Instructions
Immediately upon receiving a product from ILUMINARC®, carefully unpack the carton.
Check the contents of the box to ensure that all parts are present and that they are in good
condition. If any part appears damaged from shipping, or if the carton shows signs of
mishandling, see the Claims section in the Technical Information chapter.
Text Conventions
Convention Meaning
1~512 A range of values in the text
50/60 A set of mutually exclusive values in the text
“ILUMICON UM” The name of another publication or manual
<SET> A button on the product’s control panel
SETTINGS A product function or a menu option
MENU > SETTINGS A sequence of menu options
1~10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to enter or select in a menu

Introduction
2 Ilumipod Inground IP Series User Manual (Rev. 02 )
There are no
user serviceable
parts inside this
product. Any reference to
servicing you may find in
this User Manual will only
apply to properly
ILUMINARC
®
authorized
technicians. Do not open
the housing or attempt
any repairs unless you
are an ILUMINARC©
authorized technician.
Please refer to all
applicable local
codes and
regulations for the proper
installation of this product.
Keep this manual
for future
consultation. If
you sell this product to
another user, make sure
that they also receive this
manual.
In the unlikely
event that your
Ilumipod
Inground IP product may
require service, please
contact ILUMINARC
®
Technical Support.
Safety Notes
Please read all the following safety notes carefully because they include important information
on how to install, use, and maintain this product safely.
Personal Safety
Avoid direct eye exposure to the light source while the product is on.
Always disconnect the Ilumipod Inground IP product from its power source before
servicing.
Always connect the Ilumipod Inground IP product to a grounded circuit to avoid the risk
of electrocution.
Installing
The Ilumipod Inground IP products are for outdoor use and they can work while
submerged in up to 1 m of water (IP67) for 30 min.
Observe the installation instructions regarding drainage to ensure that the water level is
never higher than 1 m to comply with the IP67 rating.
Power and Wiring
Always make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s sticker.
Never connect this product to a dimmer pack.
Make sure that the power cable is not cracked, crimped, or damaged.
Make sure that the sealed cover is properly adjusted to avoid water entering the unit.
Operation
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product
at a higher temperature.
In case of a serious operating problem, stop using this product immediately!

Product Description
Ilumipod Inground IP Series User Manual (Rev. 02) 3
2. Product Description
Other than their
LED configuration
and programming
features, these
three products share the
same dimensions, as well
as the installation, wiring,
and troubleshooting
procedures.
The lenses in
these three
products are non-
changeable.
Therefore, make sure to
use the right product
order code for the desired
lens angle.
The Ilumipod Inground IP Series includes three separate products: Ilumipod Inground 36 IP
RGB, Ilumipod Inground 36 IP VW, and Ilumipod Inground Tri-12 IP.
Common Features
Remotely addressable DMX-512 LED inground wash light
IP67 ingress protection
IP67 stainless steel gland nuts for cable entry
Adjustable module angle
Cast aluminum and stainless steel housing
Impact resistant glass lens cover (drive-over rated)
Polished stainless steel mounting ring
Ilumicode compatible
ILUMICON compatible
Ilumipod Inground 36 IP VW Features
Operating modes:
1-channel: Dimmer
2-channel: Warm white, cool white
3-channel: Warm white, cool white, dimmer
High power 1 W (750 mA) Warm White and Cool White LEDs
Installed (non-changeable) optical system:
15lenses Product order code: 11036010
30º lenses Product order code: 11036008
Ilumipod Inground 36 IP RGB Features
Operating modes:
1-channel: Dimmer
3-channel: RGB control
4-channel: RGB, dimmer
6-channel: RGB per module
7-channel: RGB, dimmer, macro, strobe, dimming speed
High power 1 W (750 mA) Red, Green, and Blue LEDs
Blackout/static/dimmer/strobe/pulse
Installed (non-changeable) optical system:
15lenses Product order code: 11036009
30º lenses Product order code: 11036007
Ilumipod Inground Tri-12 IP Features
Operating modes:
1-channel: Dimmer
3-channel: RGB control
4-channel: RGB, dimmer
6-channel: RGB per module
7-channel: RGB, dimmer, macro, strobe, dimming speed
High power 3 W (1,050 mA) tri-color LEDs
Blackout/static/dimmer/strobe/pulse
Installed (non-changeable) optical system:
16lenses Product order code: 11012001

Product Description
4 Ilumipod Inground IP Series User Manual (Rev. 02 )
Product Dimensions
(All Ilumipod Inground IP Series models)

Installation
Ilumipod Inground IP Series User Manual (Rev. 02) 5
3. Installation
Always keep the
power cables
away from the
signal cables by
running them in different
conduits and using
separate distribution
boxes.
Ilumipod Inground
IP products can
support a
distributed load of up to
3,000 kg (6,614 lbs) when
properly installed.
Installation Notes
The Ilumipod Inground IP products consist of two parts, the product housing and the concrete
installation sleeve. The product housing is IP67 rated, but the installation sleeve is not.
Carefully read the installation instructions for the concrete installation sleeve regarding leveling
and drainage.
You will have to run the AC power and signal cables into the concrete installation sleeve and
the product’s housing.
Do not use the product’s junction box to extend the power or signal cables to other units
because it may compromise the IP rating of the junction box. Instead, use individual cables
from the product to the corresponding distribution boxes.
Installation Sleeve Orientation
Orient the installation sleeve to allow the signal cable to enter the sleeve using one of the four
cable inlets and the power cable to use the opposite inlet, as seen in the following figure. This
will reduce the stress to the signal and power cables when setting down the product, while
keeping them separated under the product’s housing.
Installation Sleeve Setup
When setting up the installation sleeve, make sure any water that entered the sleeve can drain
out on its own. Locate the installation sleeve above the normal drainage level so the product
is never under more than 1 m of water (IP67) during heavy rain.
In addition, make sure that the installation sleeve and the stainless steel collar are horizontal
and even with the ground surface. This helps to distribute the load uniformly over the
product’s surface and avoids creating dangerous bumps.

Installation
6 Ilumipod Inground IP Series User Manual (Rev. 02 )
Make sure to
disconnect the
power to the
product before opening it.
Be careful when
opening and
closing the
product’s housing as it
may compromise the
product’s IP67 rating.
Beam Angle Adjustment
Ilumipod Inground IP products have two LED modules each. You can adjust the angle of
each of these modules to spread or narrow the product’s beam. Follow these steps:
1. Loosen the Allen bolts on the stainless steel collar by turning no more than a turn
or two counter-clockwise to release the aluminum latch from its “locked” position.
2. Lift the product from the installation sleeve, making sure not to stretch the power
and signal cables.
3. Loosen four of the six nuts that hold the collar to the housing, leaving untouched
any two adjacent nuts.
4. Wait a few seconds for the seal to expand, which lowers the possibility of
damaging the seal.
5. Complete the removal of the two remaining nuts.
6. Remove the stainless steel collar.
7. Carefully lift and remove the protective glass and the attached seal, making sure
not to reverse the glass.
8. Using only your hands, push on the sides of each module to adjust its angle, as
shown in the figure below.
9. Replace the glass and then re-silicone the seal to insure a watertight seal.
10. Replace the stainless steel collar, making sure to align it with the Allen screws
while keeping the glass surface flush with the collar.
11. Replace all six nuts and adjust them manually until they touch the housing.
12. Tighten the nuts uniformly by alternating between opposite nuts.
13. Reattach the product to the installation sleeve by turning the Allen bolts clockwise.
You should only need a turn or two to have the stainless steel collar firmly
attached.

Installation
Ilumipod Inground IP Series User Manual (Rev. 02) 7
Make sure to
connect the
Ilumipod Inground
IP product to a power line
with the proper voltage
and frequency, as per the
specifications in this
manual or on the
product’s sticker.
The listed
current rating
indicates the
maximum
current draw during
normal operation.
Always connect
the Ilumipod
Inground IP
products to protected
circuits (CB or fuse) with
an appropriate electrical
ground to avoid the risk of
electrocution or fire.
Never connect an
Ilumipod Inground
IP product to a
rheostat (variable resistor)
or dimmer circuit, even if
the rheostat or dimmer
channel serves only as a
0 to 100% switch.
Make sure to use
power and signal
cables with the
indicated outer diameters
to ensure that the
corresponding gland nut
makes full contact with
the cable’s external
insulation. This is required
to keep the product’s IP67
rating when fully adjusted.
AC Power
Input Voltage and Frequency
The products in the Ilumipod Inground IP Series have an auto-ranging power supply with an
input voltage range of 100~240 VAC, 50/60 Hz.
Power Consumption
To determine the power requirements for any of the Ilumipod Inground IP products see the
label affixed to the side of the product. Alternatively, you may refer to the corresponding
specifications chart in the Technical Information chapter of this manual.
Junction Box Wiring
The Ilumipod Inground IP products have an IP67 rated junction box where the power and signal
cables come into the unit. The cables access the junction box through individual (signal and
power) IP67 rated stainless steel gland nuts.
Make sure that the junction seal is clean before placing the cover back on. In addition, tighten
the gland nuts and the junction cover to prevent water from entering the junction box and
causing a short.
The figure below shows the connections in the junction box.
Power Wiring
To provide AC power for any of the Ilumipod Inground
IP products, you must run a single SJTW rated 3-
conductor cable (AWG18/3, 6~8 mm external diameter)
from the power distribution box into the installation
sleeve and the product’s junction box.
Strip the end of the AC power cable that will connect to
the junction box as indicated in the figure on the right.
Connection Wire (US) Wire (Europe)
Live Black Brown
Neutral White Blue
Ground Green/Yellow Green/Yellow
AC Power Input Wiring

Installation
8 Ilumipod Inground IP Series User Manual (Rev. 02 )
The signal cable
must match or
exceed the
electrical
characteristics of the
Belden® 9841 cable for
EIA RS-485 applications.
You can also use CAT 5,
CAT 5e, or CAT 6.
If you choose to
bury the power or
signal distribution
boxes, make sure that
they are IP67 rated.
Signal Wiring
To provide signal for any of the Ilumipod Inground IP products, you must run a single, IP67
rated DMX signal cable (shielded, 2-conductor, AWG24/2, 6.5 mm external diameter) from
the signal distribution box into the installation sleeve and the product’s junction box.
External Wiring
You must run AC power and signal wires from the respective AC and signal distribution boxes
into each of the Ilumipod Inground IP products.
Power Distribution
Connect the bare-ended power cable from the product to a power distribution box as indicated
below.
Signal Distribution
Connect the bare-ended signal cable from the product to a signal distribution box as indicated
below.
(
Black
)

Installation
Ilumipod Inground IP Series User Manual (Rev. 02) 9
If you have not
configured the
DMX starting
address and DMX
mode for each product,
they will all use their
default values. This
means that all products
will operate in unison.
Refer to the
Operation chapter
to learn how to
enable the
Ilumipod Inground IP
products to operate with
the ILUMICON controller.
Controllers
The products in the Ilumipod Inground IP Series can operate with a standard DMX controller,
the ILUMICON controller, or the Ilumicode controller. The sections below will show you how
to connect these products to the corresponding controllers. The instructions to operate these
products with each of the above controllers are in the Operation chapter of this manual.
DMX Controller
The Ilumipod Inground IP products can work with a standard DMX controller. The channel
assignments will depend on the selected personality (refer to the Menu Map on pages 11 and
12) and the DMX address assigned to each product (refer to Programming on page 13).
The figure below illustrates how to connect the DMX controller to the Ilumipod Inground IP
products.
ILUMICON
The Ilumipod Inground IP products can also work with the ILUMICON controller instead of
a standard DMX controller. Please refer to the ILUMICON User Manual to learn how to use
this controller with the Ilumipod Inground IP products.
The figure below illustrates how to connect the ILUMICON controller to the Ilumipod
Inground IP products.

Installation
10 Ilumipod Inground IP Series User Manual (Rev. 02 )
To assign
individual DMX
addresses to
each product, you
must connect the
Ilumicode controller
individually to each
product.
ILUMINARC®
suggests that you
connect no more
than 20 products
in this mode and keep the
total distance to less than
60 m (197 ft). Otherwise,
you might need to use an
optically isolated signal
amplifier.
Ilumicode
The diagram below shows how to connect the Ilumicode to this product.
Note that this connection will control multiple products at the same time, all having the same
DMX address.

Operation
Ilumipod Inground IP Series User Manual (Rev. 02) 11
4. Operation
When you scroll
through the
menu options,
you will see
many of them that do not
correspond with this menu
map. Skip them, as they
do not work with the
White output products.
If you scroll after
STRB, you will
see the
RED,
GREN, BLUE,
and AMBE
colors. Just
skip them as they do not
work with the VW
products.
Ilumicode
The products in the Ilumipod Inground IP Series lack a control panel. Therefore, they need an
external controller, the Ilumicode device, to change their configuration.
Ilumicode Panel Description
Menu Map
The products in the Ilumipod Inground IP Series have distinct menu maps based on the colors they
produce, whether RGB or White. The Ilumicode controller presents the functions for both types of
products.
White Functions Menu Map
(Ilumipod Inground 36 IP VW)
This menu map shows you which parameters of the Ilumicode controller correspond to the
Ilumipod Inground 36 IP VW product.
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the
currently selected value into the selected function
<UP> Navigates upwards through the menu list and increases
the numeric value when in a function
<DOWN> Navigates downwards through the menu list and
decreases the numeric value when in a function
<POWER> Turns the unit on. The unit will turn off automatically
after 30 seconds of inactivity.

Operation
12 Ilumipod Inground IP Series User Manual (Rev. 02 )
When you scroll
through the
menu options,
you will see
many of them that do not
correspond with this menu
map. Skip them, as they
do not work with the RGB
only output products.
If you scroll after
STRB, you will
see the AMBE,
COOL and
WARM colors. Just skip
them as they do not work
with the RGB products.
RGB Functions Menu Map
(Ilumipod Inground 36 IP RGB and Ilumipod Inground Tri-12 IP)

Operation
Ilumipod Inground IP Series User Manual (Rev. 02) 13
Make sure to
press <ENTER>
after selecting an
option. Otherwise, the
product will not save the
new setting. In this case,
the Ilumicode’s display
will show “SEND…”
The DMX Starting
Address setting
works with all but
the REMOTE
personality.
Programming
Carry out all the programming procedures indicated below from Ilumicode’s panel. Refer to the
corresponding Menu Map (pages 11 and 12) to learn how the menu options relate to each other
depending on the type of product.
Use <ENTER> and <MENU> to change levels in the Menu Map. This is equivalent to moving
right and left respectively. Use <UP> and <DOWN> to move forward and backwards
respectively within the Menu Map options.
Press <ENTER> to accept the selected value for an option. This will send that value to the
product(s).
DMX Personality
(All Ilumipod Inground IP products)
1. Go to PERSON and select any DMX personality that matches the product with
which you are working (ignore any other options).
36 IP RGB & Tri-12 IP 36 IP VW
ARC1
ARC+D
ARC FULL
SOLID SOLID
SPECIAL1
VW
VW+D
2. Make sure to arrange the DMX addresses of all products in the current DMX
universe to avoid address overlapping.
DMX Starting Address
(All Ilumipod Inground IP products)
1. Go to DMX.
2. Select a starting DMX address (001~512).
Dimmer
(All Ilumipod Inground IP products)
1. Go to DIMMER.
2. Select a dimmer curve (OFF or DIM1~4).
DIMMER Description
OFF Dimmer curve is linear with fader
DIM1 Non-linear (fastest)
DIM2 Non-linear (fast)
DIM3 Non-linear (slow)
DIM4 Non-linear (slowest)

Operation
14 Ilumipod Inground IP Series User Manual (Rev. 02 )
Do not connect
any other
controller to the
product(s) when using the
ILUMICON controller.
WHITE 1~11
define the white
color shown
when selecting a
value 201~255 in channel
5for the ARC FULL
personality.
RGBTOW
defines the white
color shown
when the COLOR
value is set to RGBTOW.
ILUMICON Control
(Only for 36 IP RGB and Tri-12 IP)
1. Go to PERSON.
2. Select the REMOTE personality.
Static Color
(Only for 36 IP RGB and Tri-12 IP)
1. Go to STATIC.
2. Select a color (RED, GREN, or BLUE).
3. Select a color value (000~255).
4. Select STRB.
5. Select a strobe frequency (0~20).
(Only for 36 IP VW)
1. Go to STATIC.
2. Select a color (COOL or WARM).
3. Select a color value (000~255).
Color Calibration
(Only for 36 IP RGB and Tri-12 IP)
1. Go to CALIB
2. Select a white color (WHITE 1~11) or RGBTOW.
3. Select an RGB color (RED, GREN, or BLUE).
4. Select a color value (0~255).
5. Repeat steps 3and 4for the other RGB colors to obtain a white color.
6. Repeat steps 2to 5for the other white colors.
Color
(Only for 36 IP RGB and Tri-12 IP)
1. Go to SETTINGS > COLOR.
2. Select the color method (OFF, RGBTOW, or UC).
Color Description
OFF When the RGB faders are all at “255”, the output is at its
maximum.
RGBTOW When the RGB faders are all at “255”, the output is the
selected white color (see Color Calibration).
UC When the RGB faders are all at “255”, the output matches the
same color output of previous versions of this product.
Reset
(Only for 36 IP RGB and Tri-12 IP)
1. Go to SETTINGS > RESET TO FACTORY SETTINGS.
2. Select an option (YES/NO).

Operation
Ilumipod Inground IP Series User Manual (Rev. 02) 15
DMX Values
ARC 1
Channel Function Value Percent/Setting
1 Red 000 255 0 ~ 100%
2 Green 000 255 0 ~ 100%
3 Blue 000 255 0 ~ 100%
ARC 1 + D
Channel Function Value Percent/Setting
1 Dimmer 000 255 0 ~ 100%
2 Red 000 255 0 ~ 100%
3 Green 000 255 0 ~ 100%
4 Blue 000 255 0 ~ 100%
ARC FULL
Channel Function Value Percent/Setting
1 Dimmer 000 255 0 ~ 100%
2 Red 000 255 0 ~ 100%
3 Green 000 255 0 ~ 100%
4 Blue 000 255 0 ~ 100%
5 Color Macro + White Balance
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 200
201 205
206 210
211 215
216 220
221 225
226 230
231 235
236 240
241 245
246 250
251 255
No Function
Red 100% - Green Up - Blue 0%
Red Down - Green 100% - Blue 0%
Red 0% - Green 100% - Blue Up
Red 0% - Green Down - Blue 100%
Red Up - Green 0% - Blue 100%
Red 100% - Green 0% - Blue Down
Red 100% - Green Up - Blue Up
Red Down - Green Down - Blue 100%
Red 100% - Green 100% - Blue 100%
White 1: 3,200 K
White 2: 3,400 K
White 3: 4,200 K
White 4: 4,900 K
White 5: 5,600 K
White 6: 5,900 K
White 7: 6,500 K
White 8: 7,200 K
White 9: 8,000 K
White 10: 8,500 K
White 11: 10,000 K
6 Strobe 000 004
005 255 No Function 0 ~ 20 Hz
7 Dimming Speed
000 009
010 029
030 069
070 129
130 189
190 255
Dimmer is set by Ilumicode
OFF (Dimmer is linear)
DIM1 (Fastest dimmer curve)
DIM2
DIM3
DIM4 (Slowest dimmer curve)

Operation
16 Ilumipod Inground IP Series User Manual (Rev. 02 )
SPECIAL 1
Channel Function Value Percent/Setting
1 Module 1 Red 000 255 0 ~ 100%
2 Module 1 Green 000 255 0 ~ 100%
3 Module 1 Blue 000 255 0 ~ 100%
4 Module 2 Red 000 255 0 ~ 100%
5 Module 2 Green 000 255 0 ~ 100%
6 Module 2 Blue 000 255 0 ~ 100%
VW
Channel Function Value Percent/Setting
1 Warm White 000 255 0 ~ 100%
2 Cool White 000 255 0 ~ 100%
VW + D
Channel Function Value Percent/Setting
1 Dimmer 000 255 0 ~ 100%
2 Warm White 000 255 0 ~ 100%
3 Cool White 000 255 0 ~ 100%
SOLID
Channel Function Value Percent/Setting
1 Dimmer 000 255 0 ~ 100%