Iluminarc Ilumipod 7 User manual

I
Il lu um mi ip po od d 7 7 I IP P O Op pt ti ic c R RG GB BW W
Quick Reference Guide

Ilumipod 7 IP Optic RGBW QRG
2
About this
Guide
The Ilumipod 7 IP Optic RGBW Quick Reference Guide (QRG) only
contains the product’s connection and mounting information as well as the
menu options and the DMX values.
Disclaimer
This QRG does not replace the product’s user manual. You must download
the corresponding user manual from the ILUMINARC® Web site
(www.iluminarc.com) to learn about the disclaimers, safety notes,
programming modes and technical information.
Safety Notes
•DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
•DO NOT look at the light source when this fixture is on.
•DO NOT touch the fixture when it is operating because it may be hot.
•DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•DO NOT mount this fixture overhead without using a safety cable.
•DO NOT submerge this product at more than 1 m and/or for longer than
30 minutes (IP67 rating). Regular outdoor operation is fine.
•DO NOT operate this fixture if you see damage on the housing, lenses,
or cables; have the damaged parts replaced by an authorized technician
at once.
•DO NOT connect this fixture to a dimmer or rheostat.
•ONLY connect this fixture to a grounded and protected circuit.
What is
Included
•One Ilumipod 7 IP Optic RGBW
•One mounting plate
•One mounting spike
•One Warranty Card
• One Quick Reference Guide
Features
•4, 5, or 7-channel DMX RGBW LED wash light
•Operating modes:
4-channel: RGBW control
5-channel: RGBW, dimmer
7-channel: RGBW, dimmer, color macros, strobe
•High power 1 W (350 mA) LEDs
•Static color control without DMX controller
•Cast aluminum, IP67, black housing
•Stainless steel, IP67 gland nuts
•Impact resistant glass lens cover
Options
•Ilumicode controller (for fixture configuration)
•
Ilumicon controller (for operation without a DMX controller)
Ordering
•18°lenses Order Number: 11007008

Ilumipod 7 IP Optic RGBW QRG
3
Mounting
Before mounting this product, read the safety notes at the beginning of the
Ilumipod 7 IP Optic RGBW User Manual and follow the mounting
procedures indicated in it.
This product comes with a plate to mount it on any firm, non-flammable
surface, whether horizontally or vertically, on the floor or overhead. The
articulated arm that connects the light to the base is adjustable and it can
swivel, thus providing full angle control.
A spike is included for mounting this product on soil (gardens and large
flowerpots).
Mounting Diagram
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Wiring
You can connect the bare-ended IP67 rated power cable from the fixture to
an IP67 junction box, as shown below. Make sure to use IP67 rated conduit
or direct buried cable (DBC) to link the junction boxes.
AC Power Junction
Box Wiring
Floor Mount
Overhead Mount

Ilumipod 7 IP Optic RGBW QRG
4
DMX Control
You will be able to control this product using a standard DMX controller.
The Ilumipod 7 IP Optic RGBW is set by default to the 7-channel ARC
FULL DMX personality and its DMX address is 001. The connections for
the DMX cables are indicated below.
To change the DMX personality, DMX address, or any other parameter of
the Ilumipod 7 IP Optic RGBW, you will need to use the optional Ilumicode
unit (see Settings on page 5).
DMX
Connection
You can connect the bare-ended IP67 rated signal cable from the fixture to
an IP67 junction box, as shown below.
Make sure to use IP67 rated conduit or direct buried cable (DBC) to link the
junction boxes.
DMX
Junction Box
Wiring

Ilumipod 7 IP Optic RGBW QRG
5
Settings
The Ilumipod 7 IP Optic RGBW uses the Ilumicode unit for configuration
purposes.
Ilumicode
Connections
The diagram below shows how to connect the Ilumicode to this product.
Note that this connection will control multiple fixtures at the same time, all
having the same DMX address. To assign individual DMX addresses to
each fixture, you must connect the Ilumicode unit to each fixture,
individually. This means that you will also have to disconnect the DMX
output of the fixture under configuration if there are other fixtures connected
to it.
Ilumicode
Connection
Diagram
ILUMINARC® suggests you to connect no more than 20 fixtures in this
mode, while keeping the total distance to less than 60 m (197 ft). Otherwise,
you might need to use an optically isolated signal amplifier.
•The RDM2go, which includes a built in ilumicode addresser along
with many other useful features is now available.
•The Ilumicoode addresser is required for product configuration
(sold separately).

Ilumipod 7 IP Optic RGBW QRG
6
Ilumicode
Panel
Description
Button Function
<POWER>
Turns the Ilumicode unit on
<MENU>
Scrolls through the main level or exits from the current menu
or function (NOTE: Press and hold it to turn the unit off)
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu options and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu options and decreases
the numeric value when in a function
Menu
Options
1st Level
Programming Levels
Description
DMX 001~512 Sets the DMX starting address
PERSON
ARC 2
4-channel: RGBW control
ARC 2 + D
4-channel: RGBW, dimmer
ARC FULL
7-channel: RGBW, dimmer, color
macros, strobe
CALIB
WHITE1~11 RED
GREEN
BLUE
WHITE
0~255
Determines the white balance for
the color macros
RGB
Determines the white balance when
RGBTOW is active
STATIC
RED
0~255 Configures the static color and
effect
GREN
BLUE
WHITE
STRB

Ilumipod 7 IP Optic RGBW QRG
7
DMX Channel Values
ARC FULL
Channel
Function
Value
Percent/Setting
1
RGB Dimmer
000 ó255
0~100%
2
Red
000 ó255
0~100%
3
Green
000 ó255
0~100%
4
Blue
000 ó255
0~100%
5
White
000 ó255
0~100%
6 Color Macros
000 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251 ó255
No function
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down Be: 100%
R: Up G: 0% Be: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W:100%
White 1: 3,200 K
White 2: 3,400 K
White 3: 4,200 K
White 4: 4,900 K
White 5: 5,600 K
White 6: 5,900 K
White 7: 6,500 K
White 8: 7,200 K
White 9: 8,000 K
White 10: 8,500 K
White 11: 10,000 K
7 Strobe
000 ó009
010
ó
255
No function
Slow~Fast
ARC2
Channel
Function
Value
Percent/Setting
1
Red
000 ó255
0~100%
2
Green
000 ó255
0~100%
3
Blue
000 ó255
0~100%
4
White
000 ó255
0~100%

Ilumipod 7 IP Optic RGBW QRG
8
ARC2 + D
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó255
0~100%
2
Red
000 ó255
0~100%
3
Green
000 ó255
0~100%
4
Blue
000 ó255
0~100%
5
White
000 ó255
0~100%
Contact
Us
USA WORLD HEADQUARTERS
General Information - ILUMINARC
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone]
Email: [e-mail]
World Wide Web
www.iluminarc.com
EUROPE
General Information - Chauvet Europe BVBA
Address:Stokstraat 18
9770 Kruishoutem
Belgium
Voice: [phone]
General Information - Chauvet Europe Ltd.
Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.eu
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.co.uk
MEXICO
General Information - Chauvet Mexico
Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: [phone]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of
record. Follow their instructions to request support or to return a product. Visit our website
for contact details.
Ilumipod 7 IP Optic RGBW QRG – Rev. 02
© Copyright 2015 ILUMINARC®
All rights reserved
Printed in the P. R. C.