Immergas 3.027290 User manual

IE
Cod. 1.042129 - Rev. ST.003678/001
Fig. 1
BRACKET KIT FORWALL MOUNTING
INERTIAL STORAGE TANK 75 LITRES
CODE 3.027290
GENERAL WARNINGS.
All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against
weathering.
This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in
the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in
force and principles of good practice.
Improper installation or assembly of the appliance and/or compo-nents, accessories, kit and devices can cause unexpected problems to
people, animals and objects. Read the instructions provided with the product carefully to ensure a proper installation. Installation and
maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and byauthorised
professionally qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.
WARNINGS:
Before making the holes to mount the bracket to the wall with the dowels supplied, we recommend referring to the main boiler
dimensions (Fig. 1) and to the related fixing seats of the frame.
MAIN DIMENSIONS

INSTALLATION (FIG. 2 - 3 - 4): To install proceed as follows:
- Fasten the mount (3) at the height desired on the wall inserting the screws in the specific holes prepared for the screws (2) and the
dowels (1) inside the kit (Fig. 2).
- Fasten the lower support (6) in the position shown in the dra-wing (Fig. 3). Insert the screws (2) and the dowels (1), present inside
the kit, into the specific holes. Insert the 2 screws (5) present inside the kit on the lower support.
- Fasten the frame (4) on the prepared seat on the boiler using the screws (5) inside the kit (Fig. 2).
- Hang the boiler to the bracket on the wall.
- Make sure that the boiler pedestal comes into contact with the lower support as shown in the drawing (Fig. 4).
KIT COMPOSITION.
Ref. Description Qty
1 Nylon dowel 12x60 7
2 Screw 8x80 for dowel 7
3 Wall-mounted boiler support 1
4
Frame for wall mounting boiler 1
5 Screws M6x15 6
6 Lower wall-mounted boiler support 1
Fig. 2
9
2
1
5
6
1
2
3
4
5
a
7
8
ASSEMBLY

Fig. 3
Fig. 4
FASTENING THE LOWER SUPPORT
LOWER SUPPORT POSITION ON PEDESTAL
Storage Tank 75 Litres
Reference Axis