4
How to Assemble :
1. Place the motor unit (No. 5) on a dry & flat surface.
2. Put juicer body (No. 4) inside the motor unit.
3. Fit juicer mesh (No. 3) inside the juicer body and by
slightly rotating press it downward untill it gets locked properly.
4. Put the juicer cover (No. 2) on top of it and lock the safety latch (No. 6)
5. Place the juicer jar (No. 8) and pulp jar (No. 7) in place.
6. Now the juicer is ready for use.
Please note that the product has built in safety switch which allows
the motor to start only when the safety latch is properly locked.
How to Use
1. Assemble the juicer as above.
2. Plug the juicer to the power source.
3. Rotate the speed selector knob to no.-1 position.
4. Cut the fruits into small pieces and put into the juicer through the feeder tube. (However the
juicer is provided with extra large feeder tube though which you can insert complete apple,
carrot, pear etc. It is advisable to run the juicer at 2nd speed if you are taking out juice of full
fruit).
5. Push the fruits with the food pusher (Do not press the fruits too hard as it will affect the juice
efficiency.)
6. Juice and pulp will start collecting in the juice and pulp collector respectively. Empty the
two containers as soon as they are about to be full.
Cleaning & Maintenance
1. Place the base on a dry flat surface.
2. Dismantle the juicer in reverse order of assembling.
3. To take out juicer mesh (no. 3), please remove it along with
juicer body (no.4).
4. Clean Food Pusher, Cover, Pulp Collector, and Juicer mesh with soapy water and rinse
thoroughly. To remove pulp from Juicer mesh, hold bottom side facing up under running
water and gently scrub with a soft nylon brush.
5. To protect against risk of electrical shock do not put the main unit in water or other liquids.
6. Never use gas or alcohol to clean any part of the unit. Never put any part of the Juice
Extractor in dishwasher or boiling water.
7. If not in use please put the juicer in a dry place to protect the motor. It is good to use the unit
frequently.
Please note that maximum juice shall be extracted from fruit incase the juicer is running on
1st Speed.
Please note that it is required / recommended to throughly clean juicer mesh during use for
maximum juice extraction.
1
2
3
4
5
6
7
8
9