Inalsa Twister User manual

HAND
BLENDER
Instruction Manual
TwisterTwister

1
Dear Customer,
Congratulations! On the purchase of your INALSA Hand blender, this is
designed to include many superior features that permit you the fullest
expression of your cooking skill and enthusiasm. You are now on the
threshold of a whole new world of cooking pleasure.
At INALSA, we have a reputation of manufacturing innovative, high quality
appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders,
Cooking Ranges, Juice Extractors, Cooktops, Microwave Ovens, Oven
Toaster Grillers, Hand Blenders, Electric Kettles, Rice Cookers, and Electric
Chimneys. Your newly acquired INALSA Hand blender bears the same
distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and
development where uncompromising standards are maintained and rigid
quality control measures are exercised on raw materials, components and
finally, the finished product.
Your INALSA Hand blender has a lot of thoughtful features built in to make
your cooking convenient. Please read these instructions carefully, so that you
may get the best out of the power packed features in your INALSA Hand
blender.
Welcome to the INALSA world of cooking pleasure!

2
Parts Identification
Technical Specifications*
Model Twister
Voltage 230V, 50Hz, AC
Parts No. Parts Name
1. Motor housing
2. Push button
3. Stem
4. Blade guard
5. Measuring cup
6. Egg whisker
7. Blade remover
Wattage 125W
Cord Plug 2 pin, 250V, 1.5m long
No. of speeds Single speed
Type of stem Stainless steel, Non-detachable
Attachments Egg whisking blade, Measuring cup,
Blade remover & Wall bracket
* Due to continuous improvements in product, specifications are subject to
change without prior notice.
2
3
4
5
6
7
1

3
Important Instructions
Do's
1. Thoroughly familiarize yourself with the functions of the hand blender
before operation.
2. Before connecting the appliance check the mains voltage comply with the
voltage specified.
3. The blades are very sharp, so be careful while operating the blender.
4. Repairs or the replacement of the main cord must only be done by
authorized service personnel.
5. Keep the appliance away from the reach of the children.
6. Always unplug the appliance before assembling, dismantling, cleaning or
storing.
7. The appliance is constructed to process normal household quantities only.
Don'ts
1. Do not run the blender continuously for more than one minute. Allow the
motor to cool down sufficiently before starting the next cycle.
2. Do not chop extremely hard food, such as nutmeg, coffee seeds and
grains.
3. Do not overload the motor. The quantity of material for blending or
chopping operation should not be more than one half of the measuring jar
capacity.
4. Do not operate the hand blender unless the attachments are properly
clamped with the motor housing part.
5. Do not allow the cord to hang over the edges of the table, or touch hot
surface.
6. Do not immerse the appliance in water.
7. Do not attempt to repair the hand blender at home or allow any
unauthorized person to do it either.
Before First Use
1. After unpacking the unit and before any use, make sure the mechanical
parts of the unit and all its attachments are not damaged.
2. Carefully go through the instruction manual before starting the operation.

4
How to operate your hand blender
The hand blender is perfectly suited for preparing sauces, purees, soups,
mayonnaise, chutney, baby foods, for mixing drinks and milkshakes.
1. Fix the blades as per the requirements to suit different operations.
2. Introduce the hand blender in the material to be processed, then press the
speed control switch.
3. You can operate the blender in the beaker. Even you can blend directly in
the saucepan while cooking.
Egg whisking
1. Remove the chopping and mixing blade with the help of blade remover.
2. Push the egg whisker blade in position and check whether it is properly
clamped in position.
3. Now introduce the hand blender in the material to be processed, then press
the speed control button.
Attachments
Wall bracket
This hand blender comes with wall hanging facility. It can easily be hung
in the kitchen wall bracket when not in use.
Blade remover
This facility provides the customer to remove the blades easily.
Cleaning and Maintenance
1. Unplug the blender from the supply switch.
2. Clean the steel stem part with a damp cloth only.
3. After processing salty food, you should rinse the blade right away.
4. In case of any defect, contact authorized service centre or company's
service personnel.