Inalsa Robot 180 User manual

HAND
BLENDER
Instruction Manual
ROBOT
180

1
Dear Customer,
Congratulations! On the purchase of your INALSA Hand Blender, this is designed to include
many superior features that permit you the fullest expression of your blending skill and
enthusiasm. You are now on the threshold of a whole new world of blending pleasure.
At INALSA, we have a reputation of selling innovative, high quality appliances such as Food
Processors, Mixer Grinders, Juicer Mixer Grinders, Cooking Ranges, Juice Extractors,
Cooktops, Microwave Ovens, Oven Toaster Grillers, Hand Blenders, Electric Kettles, Rice
Cookers, and Electric Chimneys. Your newly acquired INALSA Hand blender bears the same
distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and development
where uncompromising standards are maintained and rigid quality control measures are
exercised on raw materials, components and finally, the finished product.
Your INALSA Hand blender has a lot of thoughtful features built in to make your blending
convenient. Please read these instructions carefully, so that you may get the best out of the
power packed features in your INALSA Hand blender.
Welcome to the INALSA world of blending pleasure!

Parts Identification
Parts No. Parts Name
1. Hanging Loop
2. Cord Plug
3. Push ON/OFF Switch
4. Motor Housing
5. Stem
6. Blending Blade
Technical Specifications*
Model Robot 180
Voltage 220-230V,50/60Hz,AC
Wattage 180 Watts
Motor Universal motor
Rating 1 Minute
Cord plug 2 Pin, 2.5A, 250V, PVC, 0.95 metre long
Stem Plastic
* Due to continuous improvements in product, specifications are subject to change without prior notice.
2
1
2
3
4
5
6

3
Important Instructions
Do's
1. Thoroughly familiarize yourself with the functions of the hand blender before operation.
2. Before connecting the appliance check the mains voltage comply with
the voltage specified.
3. The blade is very sharp, so be careful while operating the blender.
4. Repairs or the replacement of the main cord must only be done by authorized service
personnel.
5. Keep the appliance away from the reach of the children.
6. Always unplug the appliance before cleaning or storing.
7. The appliance is constructed to process normal household quantities only.
Don'ts
1. Do not run the blender continuously for more than one minute. Allow the motor to cool
down sufficiently before starting the next cycle.
2. Do not overload the motor.
3. Do not allow the cord to hang over the edges of the table, or touch hot surface.
6. Do not immerse the appliance in water.
7. Do not attempt to repair the hand blender at home or allow any unauthorized person to do it
either.
8. Do not let any persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge use this appliance, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
9. Do not let any children in any case play with the appliance.
Before First Use
1. After unpacking the unit and before any use, make sure the mechanical parts of the unit
and all its attachments are not damaged.
2. Carefully go through the instruction manual before starting the operation.
How to Operate Your Hand Blender
The hand blender is perfectly suited for preparing sauces, purees, soups, mayonnaise,
chutney, baby foods, for mixing drinks and milkshakes.
1. Connect the ord plug (2) to the power supply.
2. Introduce the hand blender in the material to be processed, then press the push ON/OFF
switch (3).
3. Take out the blender out of the processed food & clean it.
Cleaning and Maintenance
1. Unplug the blender from the supply switch and clean it with soft & damp cloth.
2. After processing salty food, you should rinse the blade stem right away.
3. In case of any defect, contact authorized service centre or company's service personnel.
Do not run the blender continuously for more than one minute. Allow the motor to cool
down sufficiently before starting the next cycle.