Infineon EVAL_DRIVE_3PH_PFD7 User manual

EVAL_DRIVE_3PH_PFD7
Getting started guide
September 2019

Copyright © Infineon Technologies AG 2017. All rights reserved. 2
Agenda
Motor drive evaluation board
Hardware and software
Tools
Getting started
Resources
1
2
3
4
5

Copyright © Infineon Technologies AG 2017. All rights reserved. 3
Agenda
Motor drive evaluation board
Hardware and software
Tools
Getting started
Resources
1
2
3
4
5

Introduction
4
Copyright © Infineon Technologies AG 2017. All rights reserved.
Compact 3-phase motor drive system solution
Designed for sensorless motor control
Spin your motor with easy-to-use GUI for
tuning of motor
The hardware board and motor control software
provides:
Sensorless control and direct & smooth startup
using inductive sensing
3 PH/ 2 PH modulation FOC
Over-current protection
Speed controlled using GUI

Copyright © Infineon Technologies AG 2017. All rights reserved. 5
Agenda
Motor drive evaluation board
Hardware and software
Tools
Getting started
Resources
1
2
3
4
5

System overview
6
Copyright © Infineon Technologies AG 2017. All rights reserved.
Components
›IMC101T-T038 Microcontroller
–iMOTION™ flexible control solution for
variable speed drives. It performs
sensor less field oriented control
(FOC)
–Includes J-Link debug interface by
Segger
–MCEDesigner v2.2-based GUI for
parametrization and tuning
›Half bridge gate driver
EiceDRIVER™ 2ED28073J06F
›CoolMOSTM IPN60R1K5PFD7S
Software package (downloadable from
www.infineon.com/iMOTION™
–MCEDesigner
–MCEWizard
–IMC101T-T038 MCE software package
installer

System overview
7
Copyright © Infineon Technologies AG 2017. All rights reserved.
Hardware
Software
For example the EVAL_DRIVE_3PH_PFD7 Kit consists of:
›EVAL_DRIVE_3PH_PFD7 board
›KIT_XMC_LINK_SEGGER_V1
›Micro-B USB cable
›MCEDesigner
›MCEWizard
›IMC101T-T038 MCE software package installer
(downloadable from www.infineon.com/iMOTION™ )

System overview
8
Copyright © Infineon Technologies AG 2017. All rights reserved.
Block diagram description:

Hardware overview
9
Copyright © Infineon Technologies AG 2017. All rights reserved.
Hardware
›Kit name
–EVAL_DRIVE_3PH_PFD7
›Kit description
–EVAL_DRIVE_3PH_PFD7 board
–USB cable
–KIT_XMC_LINK_SEGGER_V1 –Isolated debug probe
›Order number
–EVALDRIVE3PHPFD7TOBO1
›Input voltage/output power
–230 VAC/100 Watt max

Hardware overview
10
Copyright © Infineon Technologies AG 2017. All rights reserved.
Infineon parts utilized on EVAL_DRIVE_3PH_PFD7 board:
Infineon Parts
Order Number
IMC100 Microcontroller
IMC101T
-T038
600 V
half bridge gate driver
2ED28073J06F
600 V CoolMOS
TM
IPN60R1K5PFDS
3.3 V
LDO regulator
IFX1117ME V33

Hardware overview
11
Copyright © Infineon Technologies AG 2017. All rights reserved.
To properly setup the board, follow these steps:
Connect AC source to
EVAL_DRIVE_3PH_PFD7
board
4
Connect 3-phase
motor wiring to
‘U V W’ connector
XMCTM link for debugging the
source code in MCEDesigner
Connect XMCTM link’s
ribbon cable to pin 1 of
debug connector
2
1
AC power input 230 VAC
Connect to PC via
micro-B USB cable
3

Copyright © Infineon Technologies AG 2017. All rights reserved. 12
Agenda
Motor drive evaluation board
Hardware and software
Tools
Getting started
Resources
1
2
3
4
5

Software setup
13
Copyright © Infineon Technologies AG 2017. All rights reserved.
Download
1. MCEDesigner
2. MCEWizard
3. IMC101T-T038 MCE software package installer
from: www.infineon.com/iMOTION™

iMOTION™ MCE_Wizard and MCE_Designer
14
Copyright © Infineon Technologies AG 2017. All rights reserved.
Run the MCE_Wizard and MCE_Designer.exe files and follow the instructions.
Download Micrium µC/Probe™ for XMC™ installer package from:
www.infineon.com/ucprobeXMC™
Installation requirements:
›PC with Windows 7,
Windows 8, Windows 10 –
32 bit & 64 bit
›RAM –3 GB or more

Copyright © Infineon Technologies AG 2017. All rights reserved. 15
Agenda
Motor drive evaluation board
Hardware and software
Tools
Getting started
Resources
1
2
3
4
5

MCE Wizard step by step
16
Copyright © Infineon Technologies AG 2017. All rights reserved.
After installing the MCEWizard, the shortcut for MCEWizard appears on the
Windows desktop.
1
Double click the shortcut to open the MCEWizard and configure the
parameters for evaluation boards or motor.
2
If both “I have modified the circuit board” and “Enable advanced question” checkmarks are
selected. Please refer to the User Manual of the corresponding power board for additional
information.

MCE Wizard step by step
17
Copyright © Infineon Technologies AG 2017. All rights reserved.
Select the control board, Eval-M1-101T start the MCEWizard system setup
procedure by clicking the “Next” button in the right bottom corner.
1

MCE Wizard step by step
18
Copyright © Infineon Technologies AG 2017. All rights reserved.
Make sure that “I want to modify the PWM frequency” checkmark is
selected to be able to modify the motor PWM freq.
1

MCE Wizard step by step
19
Copyright © Infineon Technologies AG 2017. All rights reserved.
Please insert the motor model name.
1

MCE Wizard step by step
20
Copyright © Infineon Technologies AG 2017. All rights reserved.
Please insert the motor rated continuous current.
1