IngMar Medical Laerdal ASL 5000 User manual

USA Toll Free: 1-800-583-9910 | International: [phone] | [email protected]
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020

2
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
IngMar Medical, LLC is not responsible for translations of its proprietary
manuals or guides
Document History
Revision History
Date
Authors
Rev. 1
July 15, 2020
Michael Bails

3
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Hardware setup

4
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Open manikin
External port to
ASL 5000™

5
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Locate SimMan®ALS lung components
Release stomach line
from chest plate
Right lung
Left lung
Airway / trachea
lines
Pressure lines
Internal port to
ASL 5000™

6
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Prepare right lung
Keep tube and
plastic elbow

7
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Prepare left lung
Keep tube and
plastic elbow

8
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
SimMan®ALS ready for Lung Adapter installation
Lung Adapter
Pressure lines
Airway / trachea
lines

9
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Lung Adapter components
1. Selector
2. Right lung manifold (labeled “R”)
3. Right lung connector
4. Tube to SimMan®ALS right lung pressure port (pre-connected to Selector and labeled “To
Right Sensor”)
5. Left lung manifold (labeled “L”)
6. Left lung connector
7. Tube to SimMan®ALS left lung pressure port (pre-connected to Selector and labeled “To
Left Sensor”)
8. Tubing to ASL 5000™ connection (labeled “To SimMan® Port”)
9. Connector for SimMan®ALS right lung pressure sensor tube (labeled “R” on Selector)
10. Connector for SimMan®ALS left lung pressure sensor tube (labeled “L” on Selector)
11. Spring loaded plug for switching to SIM mode
1
2
3
4
5
6
7
8
9
10
11

10
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Connect SimMan®ALS pressure sensor lines
Insert tubing to ASL 5000™ connection port and secure with zip-tie
Connect SimMan®ALS
left lung pressure
sensor line to
connector marked “L”
Connect SimMan®ALS
right lung pressure
sensor line to connector
marked “R”
Secure with zip-tie

11
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Insert left and right lung connectors into trachea tubes
Press-fit Lung Manifolds onto SimMan®ALS Lung Ports
Left lung manifold
Right lung manifold
Insert connectors into trachea
lines, then push lines behind
plastic protection plate

12
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Insert lines labeled “To Left Sensor” and “To Right Sensor”
Insert selector into clip
“To Right Sensor” line
“To Left Sensor” line

13
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Completed Lung Adapter installation

14
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Hardware setup
1
2
3
Selector Control:
1. Hold bottom of selector
plate with thumb and finger
2. Pull top of selector plate up
(do not unscrew knob)
3. Rotate top selector plate to
ASL

15
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Close SimMan®ALS and prepare for simulation
Replace stomach line onto
chest plate
To ASL 5000™

16
Part No. 80 31 843 Rev. 1 ASL 5000 Lung Solution SimMan ALS Quick Setup Guide, © IngMar Medical, LLC. 2020
Software setup
NOTE: LLEAP 6.7 OR GREATER MUST FIRST BE INSTALLED
•Download the latest LLEAP PlugIn:
www.ingmarmed.com/LaerdalDownloads
•Double-click the .exe file and follow prompts:
NOTE: For network configuration options, please see the Quick Connect
Guide or the User’s Manual