Ingrasys G2214H User manual

Ver: v1.00
Quick Installation Guide
G2214H

G2214H Quick Installation Guide v1.00
Ingrasys Technology Inc.
Package Contents
AG2214H B C
D E
Power Adapter (Optional) Quick Installation Guide Product CD
Sunshield
F
Wall Mount Bracket
Warranty Card
GHardware Pack
H
Alignment Sticker
1
VIP Card (Optional)
I

Ingrasys Technology Inc.
v1.00 G2214H Quick Installation Guide v1.00
Connections
Connect the camera to a network switch / hub with an Ethernet cable.
Connect the attached 12V DC power jack to the DC power cable, and connect the adapter to
a power outlet, , or connect a 24V AC power jack to AC input 1 and 2.
For the use of PoE, just connect the camera to a PoE switch with an Ethernet cable; no
need to connect the power adapter to the camera.
Connect the wires to the terminal block.
3
2
1
LAN
DC Power
Physical Description & Connection
Connectors
AC input-1
AC input-2
AC input-1
AC input-2
DC Power
LAN
AC Power
4
Terminal Block I/O
Reset Button
BNC Output
2

G2214H Quick Installation Guide v1.00
Ingrasys Technology Inc.
Installing Sunshield and O-ring
Step 1. Install Sunshield by two screws. Step 2. Lock the housing by burglarproof screw.
Step 3. Draw the cable through the O-ring
3

Ingrasys Technology Inc.
v1.00 G2214H Quick Installation Guide v1.00
Mounting Camera
Step 1. Alignment Sticker on the wall and
drill holes
Step 2. Wall bracket holder on the wall
Step 3. Install U-Shaped retainer Step 4. Press the screw on the bracket to combine
Step 5. Use wrench to lock bracket with housing. Step 6. Fix the camera into the wall
Step 7. Adjust vertical and horizontal angles 4

G2214H Quick Installation Guide v1.00
Ingrasys Technology Inc.
Assigning IP address
Launch Ingrasys Discovery Tool (IngrasysDiscovery.exe). The tool will start searching and then
displaying the cameras on the Device List after they are found.
2Check the box to select a camera device from the list.
Camera may be assigned with a valid IP address via DHCP server. It can be manually given a static
IP. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info
if camera is password protected. (Default ID/Password : Admin/Admin)
3
4Click on the “Browse” button to get access to the camera web page immediately.
1
5

Ingrasys Technology Inc.
v1.00 G2214H Quick Installation Guide v1.00
2The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The
network URL is rtsp://Camera IP/stream1. The example given below is that live video is displayed
with QuickTime player.
Accessing the camera
1Launch IE browser and input the IP address of the camera, or click on “Browse” button on
Ingrasys Discovery Tool. The web page with video will then be presented as below.
6

G2214H Quick Installation Guide v1.00
Ingrasys Technology Inc.
Tuning camera Focus
1Open the housing. (Make sure the burglarproof screw has been taken away)
2The G2214H series cameras are bundled with a vari-focal lens. Adjust the Zoom range, T ↔ W for a
proper view angle and adjust the focus controller in the range of N ↔ ∞ shown on the lens.
7