Lilin IPD6220ES3.6 User manual

Instr uction Manual
66-IPD622CSE
IPD6220ES/6222ES 3.6/4.3/6
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
1080P HD Vandal Resistant Dome IP Camera

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this 1080P HD Vandal Resistant Dome
IP Camera. You now own one of the many fine network products we
manufactured. This product has been carefully inspected under
rigid quality control and should reach you in perfect condition.
With reasonable care, it will provide years of reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT

IPD6220ES/IPD6222ES series is an 2 Megapixel 1080P HD
Vandal Resistant Dome IP Camera, built-in H.264 AVC(Advanced
Video Coding) video compression. H.264 AVC video compression
engine supports high definition video quality, 1080P(1920x1080)
resolution, bandwidth efficiency with PPPoE and DDNS.
Also it provides higher bit rate of internet and diverse alarm
functions such as movement video detection e-mail or FTP.
Moreover, IPD6220ES/IPD6222ES series can do remote
surveillance with iPad, iPhone or Android cell phone. The
software R&D engineer can use HTTP protocol(HTTPAPI) or
ONVIF protocol to develop related software, and integrate them
with existing application software system.
IPD6220ES series meets EN50155:2007 criteria for rolling stock
applications is ideal solution for remote video monitoring via
internet.
Executive Summary

Unit: mm
PART DESCRIPTION & DIMENSION
1Base
Dome Cover
Microphone
Mask
Camera Body
Network Cable (IPD6220ES series)
M12, 4-Pin D-coded male connector
DC12V Power Input Jack (IPD6222ES series)
RJ-45 Network Connector (IPD6222ES series)
Network Indicator LEDs
Green(LINK): Network cable connected, this LED lit.
Orange(ACT): Data communications, this LED flashes.
Micro SD Card Slot
Reset Key
To restore the server to factory default setting.
DC12V input connector
2
3
4
5
6
7
8
9
10
7
11
10
9
12
115
40
6
1
2
3
4
5
[IPD6222ES]
[IPD6220ES]
8
12
43
Pin 1: Tx +
Pin 2: Rx +
Pin 3:
Pin 4: R
Tx -
x -
M12 Connector
11
12
13

20°
a
a
62°62°
45.7
a
INSTALLATION
1. Please use the enclosed hexagon screw driver to untighten the 4 screws on the
dome cover (FIG.1).
FIG. 1
2. Put the provided screws (M3.0*25, wooden screw) through the holes marked as
"a", and fix the bottom chassis in the desired area (FIG.2 & FIG.3).
FIG. 2 FIG. 3
3. Loosen the screws on the camera body cover to rotate the camera body to the
desired angle and then tighten the screws (FIG.4 & FIG.5).

4. Put on the dome cover, use hexagon screw driver to screw dome cover into
bottom chassis and then tighten the screws (FIG.6).
FIG. 6
FIG. 4 FIG. 5

1. 2 Megapixel 1080P HD
Vandal Resistant Dome
IP Camera
2. Instruction Manual
3. CD Software Pack
IPD552EX2.2/4.2 N/P
H.264 Full HD IP Cameras
INSTRUCTION MANUAL
PRODUCTION COMPONENTS
4. L type Hex Key Wrench
In st r u ct i on M an u al
IPD2220ES 4.3/6
1080P HD Dome IP Camera
(2). Use PoE power injector and the network switch connected to the network.
PoE Power Injector
PC
LAN LAN / Internet
AC
Non-PoE Switch
LAN
IPD6220ES
IPD6222ES
PC
IPD6220ES
IPD6222ES
For connecting IPD6220ES/6222ES series to the network, please follow one of the
system architectures:
(1). Use with PoE of the network switch connected to the network.
SYSTEM ARCHITECTURES
LAN LAN / Internet
PoE Switch

Use hardware to restore factory default settings, follow these steps:
1. Hold "RESET Key" for 10 seconds, then release.
2. After about 40 seconds, the network LED light is off, and then lit.
3. This camera has completed the factory default settings, and then reboot.
4. Use IPScan software search for this IP device.
5. Using a Internet browser open the IP device.
6. Enter the default username "admin" and password "pass" to operate.
For the convenience of users, restore the factory default settings will revert to the
default IP address 192.168.0.200.
NOTE
EMERGENCY FACTORY DEFAULT