InHand ER805-NRQ3 User manual

InHand ER805-NRQ3 User Manual
I
www.inhand.com.cn
Beijing InHand Networks Technology Co., Ltd.
InHand ER805-NRQ3 5G Edge Router
User Manual
V1.0—2021.09

InHand ER805-NRQ3 User Manual
i
Declaration
Thank you for choosing our product. Before using this product, please read this manual carefully.
The contents of this manual cannot be copied or reproduced in any form without the written
permission of InHand.
Due to continuous updating, InHand cannot promise that the contents are consistent with the actual
product information, and does not assume any disputes caused by inconsistency of technical
parameters. The information in this document is subject to change without notice. InHand reserves the
right of final change and interpretation.
©2021 InHand Networks. All rights reserved.
Conventions
Symbol
Indication
1 1 Button name, for example, ‘click Save button’.
“” Indicates a window name or menu name, for example, the pop-up window “New
User”.
>>
A multi-level menu is separated by the double brackets “>>”. For example, the
multi-level menu File >> New >> Folder indicates the menu item [Folder] under the
sub-menu [New], which is under the menu [File].
Cautions
Please be careful of the contens under Cautions, improper action may result in loss of
data or device damage.
Note Note contain detailed descriptions and helpful suggestions.
Technical Support
Email: [e-mail]
URL: www.inhandnetworks.com

InHand ER805-NRQ3 User Manual
I
CONTENTS
1 Overview ............................................................................................................. 1
2 Hardware ............................................................................................................ 2
2.1 Indicator Description ............................................................................................... 2
2.2 Restoring to Default Settings via the Reset Button ...................................... 3
2.3 Antenna……………………………………………………………………………………………..4
3 Default Settings ................................................................................................. 5
4 Login and Network Access .............................................................................. 6
4.1 Network Access via Ethernet ................................................................................ 6
4.2 Network Access via SIM card ............................................................................. 10
4.3 Network Access via Wi-Fi .................................................................................... 12
5 Dashboard ........................................................................................................ 15
6 Status ................................................................................................................ 16
6.1 Events ......................................................................................................................... 16
6.2 Clients ......................................................................................................................... 16
6.3 VPN ............................................................................................................................. 16
7 Internet ............................................................................................................. 18
7.1 Internet List .............................................................................................................. 18
7.2 Work Mode .............................................................................................................. 18
7.2.1 Optimal Forwarding & Load Balancing .............................................. 19
8 Local Network .................................................................................................. 20
9 Wi-Fi .................................................................................................................. 22
10 VPN ................................................................................................................. 25
10.1 IPSec ......................................................................................................................... 25

InHand ER805-NRQ3 User Manual
II
11 Security ........................................................................................................... 27
11.1 Inbound/Outbound Rules ................................................................................ 27
11.2 Port Forwarding ................................................................................................... 28
12 Services ........................................................................................................... 30
12.1 Interface Management ...................................................................................... 30
12.2 DHCP server ........................................................................................................... 30
12.3 Fixed Address List ................................................................................................ 30
12.4 Static Routes.......................................................................................................... 31
13 System ............................................................................................................ 32
13.1 Cloud Management ............................................................................................ 32
13.2 Change the Password ........................................................................................ 32
13.3 Remote Access Control ..................................................................................... 33
13.4 System Clock ......................................................................................................... 33
13.5 Device Options ..................................................................................................... 34
13.6 Configuration Management ............................................................................ 34
13.7 Device Alarms ....................................................................................................... 35
13.8 Tools ......................................................................................................................... 36
13.8.1 Ping ............................................................................................................... 36
13.8.2 Traceroute .................................................................................................. 36
13.8.3 Capture ........................................................................................................ 37
13.8.4 Diagnostic Log .......................................................................................... 37

InHand ER805-NRQ3 User Manual
1
1 Overview
InHand ER805-NRQ3 5G Edge Router is a new generation 5G edge router
launched by InHand Networks. With 4G / 5G wireless network and a variety of
broadband services, this product can provide Internet access for all industries
of IoT. The product adopts SD-WAN technology to provide uninterrupted data
communication link experience for industry applications.
ER805-NRQ3, with its perfect security and agile wireless link services,
realizes the networking of a variety of IoT devices, can help enter enterprises to
realize informatization and digitization.
Fig. 1 Application case

InHand ER805-NRQ3 User Manual
2
2 Hardware
2.1 Indicator Description
ER805-NRQ3
Indicator LED Status and Definition
System
Steady off --- Power off.
Blinking in blue --- System starting.
Steady in blue --- System operates properly.
Blinking in red --- System faults.
Blinking in green --- System upgrading.
Network Status
Blinking in red --- Network connection lost.
Blinking in green --- Cellular network connecting.
Steady in green --- Cellular network connected.
Blinking in blue --- Ethernet network connecting.
Steady in blue --- Ethernet network connected.
Wi-Fi 2.4G
Steady off --- Disabled.
Steady in green --- Wi-Fi 2.4G connecting.
Blinking in green --- Wi-Fi 2.4G working properly.
Wi-Fi 5G
Steady off --- Disabled.
Steady in blue --- Wi-Fi 2.4G connecting.
Blinking in blue --- Wi-Fi 2.4G working properly.
Note: If both cellular network and ethernet network are working properly,
Network Status Indicator will be in blue. And it will show the color of the
connecting network if another network is not connected. If either two network
are not connected, this indicator will be in red.

InHand ER805-NRQ3 User Manual
3
2.2 Restoring to Default Settings via the
Reset Button
To restore to default settings via the reset button, please perform the following
steps:
1. Press the RESET button immediately after power on the device.
2. System indicator will blink after a few seconds, and after blinking for about
half a minute, it will be steady on.
3. Release RESET button, System indicator will blink, and press the RESET
button again.
4. When System indicator blinks slowly, release the RESET button. The device
has been restored to default settings and will start up normally later.

InHand ER805-NRQ3 User Manual
4
2.3 Antenna:
List of antenna：
Type of Antenna Model Number Manufacturer Max Gain
5G Sucker antenna GY-XDK-OCL2-B2JG24.1 ShenZhen GuYou Technology Co., Ltd. 5dBi
WiFi Sucker
antenna GY-XPF-BCL2.5-GJG22 ShenZhen GuYou Technology Co., Ltd. 3dBi
Note:
1. Cellular1 is the main antenna of the 3/4G, Cellular2 is the AUX antenna of
the 3/4G.
2. The following figure shows the frequency bands supported by 5G antennas:

InHand ER805-NRQ3 User Manual
5
3 Default Settings
No. Function Default Settings
1 Cellular − Dual SIM card enabled, use SIM1 by default.
2 Wi-Fi
− Wi-Fi 2.4G AP mode enabled, SSID: ER805-NRQ3-
followed with the last 6 letters of the AP MAC.
− Wi-Fi 5G AP mode enabled, SSID: ER805-NRQ3-5G-
followed the last 6 letters of the AP MAC.
− Auth Method is WPA2-PSK.
− Both WPA/WPA2 PSK keys in two mode are the last
8 letters in serial number.
3 Ethernet
− 4 LAN are enabled.
− IP Address: 192.168.2.1
− Netmask: 255.255.255.0
− DHCP server enabled, IP address is 192.168.2.2 to
192.168.2.100, can provide IP address for
downstream devices automatically.
4 Management
Services
− Local HTTP(80) and HTTPS(443) are enabled.
− Disable HTTPS access from cellular network.
5 Username and
password
− adm/123456 (super administrator)

InHand ER805-NRQ3 User Manual
6
4 Login and Network
Access
4.1 Network Access via Ethernet
Step 1: Connect power and Ethernet cable to ER805-NRQ3, connect WAN port
to public network, and one of LAN to PC.
Step 2: Configure PC to be in the same network segment as the IP address of
the router.
(1) Enable PC to obtain an IP address from DHCP automatically
(recommended).
(2) Configure a fixed IP address in the same network segment as the router for
PC. The IP address should be one of the address in 192.168.2.2~192.168.2.254,
Subnet mask should be 255.255.255.0, and Default gateway should be
192.168.2.1. DNS server should be 8.8.8.8 or the address of ISP’s DNS server.

InHand ER805-NRQ3 User Manual
7
Obtain an IP address automatically/manually
Step 3: Access to the default IP address 192.168.2.1 in a browser, enter
username and password(adm/123456 by default) then access to router’s WEB
management page. If the browser alarms the connection is not private, show
advanced, and proceed to access to the address.
Login to device’s WEB management page

InHand ER805-NRQ3 User Manual
8
Step 4: Create a WAN port in “Internet” in the left menu. ER805-NRQ3 wiill
enable WAN1 as DHCP mode by default. It will connect to Internet is the
upstream device also works in DHCP mode.
There are two methods to obtain IP address: Dynamic DHCP (recommend)
and Static IP (save after configure manually).
Obtain IP address by Dynamic Address (DHCP)

InHand ER805-NRQ3 User Manual
9
Obtain IP address by Static IP
Step 5: Check the connectivity in “System >> Tools >> Ping”.

InHand ER805-NRQ3 User Manual
10
4.2 Network Access via SIM card
Step 1: Insert the SIM card when device is power off. Connect 4 4G/5G antennas
to the router, and connect PC to router. Then power on.
Note：
When insert or plug out SIM card, please unplug the power cable to prevent
data loss or damage the router.
ER805-NRQ3 supports 4 antennas, please connect all antennas to obtain high
communication quality.
Step 2: Open a browser and access to router’s WEB management page. (refer
to 4.1)
Step 3: Click “Internet”, click Edit button in the right of Cellular to set dialup
profile. The device enables the cellular by default, it will connect to Internet

InHand ER805-NRQ3 User Manual
11
within a few minntes. If the device cannot connect to Internet, please disable
and restart dialup. (If you use a private network SIM card, you also need to
configure APN parameter)
Step 4: Check the dialup status in “Dashboard >> Interface Status”, if it shows
green in Cellular icon, the router has connected to Internet by SIM card. Click
Cellular icon to get check more dialup information like signal strength, IP
address or DNS.

InHand ER805-NRQ3 User Manual
12
4.3 Network Access via Wi-Fi
Step 1: Connect Wi-Fi antenna, and connect PC to the device. Access to
router’s WEB management page. (refer to 4.1)
Step 2: Choose the frequent band of Wi-Fi. ER805-NRQ3 supports 2.4G and 5G
Wi-Fi. These two Wi-Fi can work independently at the same time. 2.4G Wi-Fi has
higher penetration while 5G Wi-Fi has higher transmission speed. You can
check Wi-Fi status in “Wi-Fi” of the left menu.
Step 3: Set Station Role in “Wi-Fi 2.4G” or “Wi-Fi 5G”: AP or Client.
AP mode (default mode): ER805-NRQ3 acts as an accsess point to radiate
wireless signals, and other terminal devices can connect this device to access
the Internet. It is necessary to ensure that ER805-NRQ3 itself has been
connected to the Internet through wired or dialup mode. AP mode supports
setting SSID name and encryption authentication mode, and terminal devices
will need to input password when connecting.

InHand ER805-NRQ3 User Manual
13
Client mode: ER805-NRQ3 connects to other AP Wi-Fi device to access the
Internet.
Click Add button in “Internet” page, select “Wi-Fi(STA)” and then configure
other parameters.

InHand ER805-NRQ3 User Manual
14

InHand ER805-NRQ3 User Manual
15
5 Dashboard
Click “Dashboard” in the left menu to access to Dashboard, and check
Device Information, Interface Status, Traffic Statistics and other information of
the device.
Click interface icon in Interface Status, and check detailed information of
the interface in the right menu.

InHand ER805-NRQ3 User Manual
16
6 Status
Click “Status” in the left menu to access to status page, check events and
clients connected to this device and VPN status in this device.
6.1 Events
Router will record event log like user login, configuration changed, link
changed, reboot and other events in Events page,
By selecting start data, end date and event type, narrow the scope of
retrieval and view a certain type of event.
6.2 Clients
Check the information like name, IP address or MAC address of the device
connected to ER805-NRQ3 in Clients page.
6.3 VPN
Check the status and the traffic consume of the VPN in ER805-NRQ3 in VPN
page.