Inmarsat IsatPhone Pro Installation guide

We Deliver Solutions tailored to your needs
IsatPhone FAQ
IsatPhone PRO / IsatPhone 2
Where is the IMEI number found on the IsatPhone Pro?
The IMEI number is displayed under Menu > Settings > About.
Where is the firmware version found on the IsatPhone Pro?
The firmware version is displayed under Menu > Settings > About.
Where is the IMSI (SIM card number) found on the IsatPhone Pro?
The IMSI number is displayed under Menu > Settings > About.
Can a GPS fix be obtained manually?
If the phone continues to show the GPS fix required icon (which means that a new GPS fix is needed)
select Menu > GPS position. The new GPS fix is displayed. When this screen is open, the phone will
attempt to refresh the GPS fix every 30 seconds.
How does the IsatPhone Pro obtain a GPS fix?
Before a call can be made, the phone needs a GPS fix so it can be located by the satellite. This
happens automatically, but if a new GPS fix is needed the GPS fix icon will be displayed on the
screen. The phone should be kept in the open with a clear view of the sky until the icon on the
screen disappears. Once this is done the phone is now ready to register with the network.
How does the IsatPhone Pro connect to the Inmarsat network?
Stand outside with a clear view of the sky with the phone antenna pointing upwards. There must
be a clear line of sight between the phone's antenna and the satellite. The more sky you can see
the stronger the signal should be from the satellite. If open sky makes up about 70% of your view
when you look up, then the signal should be strong. 'Searching satellite' will appear on the screen.
The top left of the screen will display 'Inmarsat' when your phone is connected to the satellite. The
signal bars indicate the signal strength. At least two signal bars are required to make and receive
calls.

We Deliver Solutions tailored to your needs
How is the IsatPhone Pro switched on and off?
Hold down the red key, which is found on the top right of the main keypad, until the screen lights
up. The first time you use your phone, use the navigation keys to select your language and set the
time zone. To switch off, hold down the red key until the screen shuts down.
How is the SIM card inserted into the IsatPhone Pro?
Remove the battery cover by using a coin to turn the screw slot on the back of the IsatPhone Pro
until it is vertical. If the battery is in place, lift it out. Slide the catch down on the SIM holder and flip
it outwards. Make sure the angled corner of your SIM card is on your left and slide it into the holder.
Flip the holder back into place and slide the catch back up. Insert the battery, replace the cover and
turn the screw slot until it is horizontal.
What features does the IsatPhone Pro have?
The phone supports global satellite telephony (including Bluetooth for hands-free use), voicemail,
SMS text and email messaging, and GPS location data (view position and text)
What coverage is available for the IsatPhone Pro?
The IsatPhone Pro operates around the world. Global coverage maps are available from the
Inmarsat.com website.
How long are Inmarsat SMS messages kept, if undelivered to mobile phones?
SMS messages are sent instantly. If they are not delivered this could be due to an issue with the
recipient's network. Customers will need to check the time that mobile phone operators keep SMS
messages in their system.
How long are SMS messages kept in the system if undelivered to Inmarsat numbers?
SMS messages are kept in the system for a maximum of 7 days.
How long are messages retained when an email is sent to the SMS service?
Inmarsat will keep email messages sent to the SMS service for up to 72 hours.

We Deliver Solutions tailored to your needs
How long are voicemail messages kept in the BGAN voicemail system?
Voicemail messages are kept for 72 hours in the voicemail system.
Does the IsatPhone Pro Data service support Bluetooth profiles?
Headset and hands-free profiles (only for speech, not for data) are supported.
Is there a WAP browser for the IsatPhone Pro Data service?
There is no web browser on the handset interface.
Low speed data is not working on the IsatPhone Pro?
Check is to ensure that the low speed data service is provisioned on the SIM card.
For IsatPhone Pro data, are USB drivers required to connect the handset to a PC?
Yes.
Is a dial-up connection required for the IsatPhone Pro data service?
Yes, if using X-Gate, but no if using Amos Connect.
What should be done if the handset interface freezes during an IsatPhone Pro data sessions?
Ensure that the latest firmware is installed on the handset.
Is the IsatPhone Pro data service compatible with Mac OS or Linux?
No, it is not compatible (as at April 2011).
Can the IsatPhone Pro be used at sea?
IsatPhone Pro is part of Inmarsat's land portfolio and can be successfully used on land. It is designed
to be used at sea with a maritime dock and antenna. When maritime environmental conditions are
calm, users may have success using it hand-held, but is not designed for such use at sea. To gain
the best performance at sea, use IsatPhone Pro in conjunction with a maritime docking station with
a maritime antenna. These can be purchased from Beam Communications.
What is provisioned for emergency calling outside the USA for the IsatPhone Pro?
Emergency calling is not supported on the IsatPhone Pro outside the USA.

We Deliver Solutions tailored to your needs
What is the format to send an email to the IsatPhone Pro?
The format to send an email to the IsatPhone Pro is: 87[email protected]marsat.com. This is
covered in the User Guide supplied with the handset.
What is the total weight of the IsatPhone Pro complete with box and accessories?
The total weight including handset, battery, box and accessories is 948g (2.09lb).
How does the IsatPhone Pro indicate a network connection?
In the top left hand corner of the screen "Inmarsat" will be displayed beneath "IsatPhone", and four
beeps will be heard when the phone is connected to the network.
Is there a Chinese keypad version of the IsatPhone Pro?
PINYIN input of simplified Chinese is available. This is achieved by phonetically entering the 'sound'
of characters and requires the user to select from a list of relevant characters. The phonetic entry is
achieved through Latin character input.
Why is the IsatPhone Pro battery not charging?
When a battery is dead the display will show a black screen. It can take 5-7 minutes to appear to
start charging. This is because it needs some charge to light the back screen and show the battery
icon charging
How can contacts be synchronized using the IsatPhone Pro?
The USwiftBroadband drivers must be installed before the synchronization tool is run
Does the IsatPhone Pro support Fixed Number Dialling?
The Isat Phone Pro supports Fixed Number Dialling. This allows the administrator of the phone to
lock outgoing calls to specific numbers or prefixes. The Fixed Number Dialing feature is switched
on and off from the Security menu and requires the PIN2 code (9999 by default). The user then
goes to "Contacts", where the "FND" section allows numbers to be typed in or copied from the
phonebook. With Fixed Number Dialing switched on, these are the only numbers that can be dialed.
The other phone numbers stored on the phone remain available for browsing but not calling. The
User Guide for the IsatPhone Pro provides a more in-depth description of this process.
How long does it take to get a GPS fix for a new IsatPhone Pro phone?
When attempting to get a GPS fix (including after upgrading the firmware) for a new IsatPhone Pro,
it can take between 20 to 90 seconds to get a full GPS fix

We Deliver Solutions tailored to your needs
What is the IsatPhone Pro battery life?
IsatPhone Pro battery life is 8 hours talk time and up to 100 hours’ standby time. If a user
experiences a reduced battery life, then the firmware version should be checked to ensure that the
latest version is installed.
How is the keypad locked on the IsatPhone Pro?
You can lock the keypad by pressing the mains key in the centre of the phone followed by the *
key. Only the green and red buttons will be active now.
How is the IsatPhone Pro’s battery charged?
Plug the charger into the power source. Then connect the mini USB connector from the plug into
the base of the phone. Leave to charge until battery is full (it's important to fully charge when first
purchased).
How is the voicemail feature accessed on the IsatPhone Pro?
To retrieve and listen to voicemails, press and hold down the 1 key, or dial 57. This will then
automatically dial your voicemail inbox. Alternatively, you can dial the voicemail box directly on
[phone] and press the green key to dial.
How is an incoming call declined before it is answered on the IsatPhone Pro?
When there is an incoming call and the phone is ringing you can press the red button to decline it.
The details of the calling party will now be stored in the call register, under missed calls.
How is the redial feature used on the IsatPhone Pro?
If you press the green button you can see a list of the previous numbers which you have dialled.
Cycle through the numbers with the cursor keys, and l press the green button again when you reach
the one you want to call.
How is an outgoing call made on the IsatPhone Pro?
To make a call enter the full international number by dialling +, then the country code, area code
(without the leading 0), telephone number and then press the green key, eg. [phone].
How is an ongoing call terminated on the IsatPhone Pro?
Press the red button to end/terminate a call.
How is an incoming call answered on the IsatPhone Pro?
Firstly, the antenna has to be deployed. When the phone rings, press the green button to answer
the incoming call.