Innoquest SPOTON MINI-PATTERNATOR User manual

Product Manual
Innoquest Item # 26980
1
Table of Contents
1.0 Features…………………..……………….. 1
2.0 Specifications……………..……………… 1
3.0 Care and Storage………………………… 1
4.0 Taking a Measurement…..……………… 2
5.0 Trouble Shooting………….………………2
6.0 Warranty & Service……………………….3
1.0 Features
Quickly visualize spray pattern and coverage
Easy handheld operation
Small size for easy transport and storage
Made in USA
2.0 Specifications
Capacity: 16 channels spaced 2.5cm (0.984in) apart
Size: 12 in (30cm) tall x 18 in (46cm) wide x 1 in (2.5cm) thick
Weight: 2.7 lbs (1.2 kg) weight
Construction: PVC Body, Polycarbonate Window, Polyethylene Balls
3.0 Care and Storage
Use only with clean water and rinse with clean water if unit becomes
contaminated with chemicals. Wipe unit with damp cloth for cleaning.
Store unit away from direct sunlight! Sunlight can fade the red color
of the balls.

2
4.0 Taking a Measurement
Note: See Demo Video on www.YouTube.com
(Search: SpotOn Patternator)
For best results hold meter at a slight angle from horizontal so that fill
progress can be seen during use. When full to the desired level
remove from the spray and hold unit vertical and give it a slight shake
to assure all balls are sitting at the correct level.
5.0 Troubleshooting
If balls stick and do not want to float fully wet entire unit and shake to
release balls and coat all surfaces with water. Once the balls and the
inside channels are fully wet the balls will no longer stick.
3
6.0 Warranty & Service
One Year Warranty
Innoquest, Inc. warrants this product to be free from defects in
materials and workmanship under normal use and service for a period
one (1) year from date of purchase. This warranty extends only to the
original purchaser and shall not apply to any product which, in
Innoquest’s sole opinion, has been subject to misuse, alteration,
abuse, or abnormal conditions of operation or handling. Innoquest’s
obligation under this warranty is limited to repair or replacement of the
product which is returned to Innoquest. Innoquest accepts no liability
for whatever damages may be caused by a malfunctioning product.
Repair & Service Policy
Product returned to Innoquest for repair or service must follow the
guidelines set forth as follows: Return of the product for warranty or
service repair will be the responsibility of the purchaser (Innoquest
does not pay inbound shipping charges). All returns must receive an
RMA number by calling Innoquest prior to return of the product. The
RMA number must be clearly marked on the outside of the shipping
carton. If the customer is returning product for non-warranty related
repair or service, a minimum charge will apply for accessing the
product’s repair needs and further work will not be completed without
the customer’s approval.
910 Hobe Road
Woodstock, IL 60098
Toll Free: 800-637-1623
Phone: [phone]
Fax: [phone]
[e-mail]
www.innoquestinc.com
© 2013 Innoquest, Inc. USA P/N 27030 Rev. 2 (Revised 7/29/13)