Innotech QUADRAT-11 User manual

© INNO
TECH
Arbeitsschutz GmbH.
Irrtümer, Druckfehler, technische Änderungen v rbehalten!
© INNO
TECH Arbeitsschutz GmbH. Err rs and misprints accepted. We reserve the right t make technical changes.
Page 1 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
INSTRUCTIONS FOR
INSTALLATION AND USE
ENGLISH
ACHTUNG: DEUTSCH
Die M ntage und die Verwendung der Sicherungseinrichtung ist erst zulässig, nachdem der M nteur und der
Anwender die Original Aufbau– und Verwendungsanleitung in der jeweiligen Landessprache gelesen haben.
ATTENTION: ENGLISH
Assembling and using f the safety pr duct is nly all wed after the assembler and user read the riginal
installati n and applicati n instructi n in his nati nal language.
Attention!: FRANÇAIS
Le m ntage et l’utilisati n du disp sitif de sécurité ne s nt aut risés qu’après lecture par le m nteur et par
l’utilisateur de la n tice d' rigine de m ntage et d'utilisati n dans la langue du pays c ncerné.
Attenzione: ITALIANO
Il m ntaggi e l’us del disp sitiv di sicurezza è ammess s ltant d p che il m ntat re e l’utente hann
lett le istruzi ni per l'installazi ne e l'us nella rispettiva lingua nazi nale.
ATENCIÓN: ESPAÑOL
N está permitid m ntar ni usar el disp sitiv de pr tección antes de que el m ntad r y el usuari hayan
leíd las instrucci nes de m ntaje y us riginales en la lengua del respectiv país.
Aten ão: PORTUGUES
A m ntagem e empreg d mecanism de pr teçã s mente serã permitid s, após m ntad r e
usuári terem lid as instruções de us riginais, n respectiv idi ma d país, s bre a m ntagem e
empreg d mesm .
Attentie: NEDERLANDS
De m ntage en het gebruik van de veiligheidsinrichting is pas t egestaan, nadat de m nteur en de
gebruiker de riginele m ntage- en gebruikershandleiding in de desbetreffende taal gelezen hebben.
Figyelem: MAGYAR
A bizt nsági berendezés felszerelése és használata csak az után megengedett, miután a szerelést végző és a
használó személyek a nemzeti nyelvükre lef rdít tt, eredeti használati utasítást el lvasták és megértették.
Pozor! SLOVENSKY
M ntaža in up raba varn stnih naprav je d v ljena šele takrat, k sta m nter in up rabnik prebrala
riginalna nav dila za m ntaž in up rab v k nkretnem jeziku.
POZOR: ČESKY
M ntáž a p užívání zabezpeč vacíh zařízení js u p v leny až p té, c si prac vníci pr vádějící m ntáž a
uživatelé přečetli v příslušném jazyce riginální náv d k m ntáži a p užívání.
DİKKAT!: TÜRKÇE
Güvenlik tertibatının m ntajına ve kullanımına, ancak m ntaj teknisyeni ve kullanıcı, rijinal kurulum ve
kullanma talimatını kendi ülke dilinde kuduktan s nra, izin verilir.
Obs! : NORSK
M nteringen g anvendelsen av sikkerhetsinnretningene er gyldige først etter at m ntøren g brukeren har
lest den riginale ppbygnings- g bruksanvisningen i det tilsvarende landets språk.
O B S : SVENSKA
Säkerhetsan rdningen får inte m nteras ch användas förrän m ntören ch användaren har läst igen m
k nstrukti nsbeskrivningen ch bruksanvisningen i riginal på resp lands språk.
Huomio: SUOMI
Turvalaitteiden asennus ja käyttö n sallittu vasta, kun asentaja ja käyttäjä vat lukeneet alkuperäisen
asennus- ja käyttö hjeen malla kielellään.
GIV AGT: DANSK
M ntagen g brugen af sikkerhedsudstyret er først tilladt, efter at m ntøren g brugeren har læst den
riginale vejledning i samling g brug på det pågældende lands spr g.
UWAGA: POLSKI
M ntaż i użytk wanie urządzenia zabezpieczająceg d zw l ne jest wtedy, gdy m nter i użytk wnik
przeczytają ryginalną instrukcję m ntażu i użytk wania w sw im języku.

Page 2 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
INSTRUCTIONS FOR
INSTALLATION AND USE
SAFETY INSTRUCTIONS
•INNOTECH QUADRAT-11 sh uld nly be installed by specialised/c mpetent experts
familiar with the r f safety system and in c mpliance with the current state f the art.
•Y u must be familiar with these instructi ns, as well as with the l cal safety regulati ns as
a prerequisite f r installing and using the system. Y u must als be physically and
mentally fit and trained in the use f PPE (Pers nal Pr tective Equipment).
•Medical c nditi ns (cardi vascular pr blems, intake f medicines, alc h l) can affect the
safety f the user when w rking in high places.
•Adhere t the respective accident preventi n regulati ns (e.g. w rking n r fs) when
installing/using the attachment device INNOTECH QUADRAT-11.
•A plan must be available that specifies rescue pr cedures f r all p ssible emergencies.
•Bef re starting the w rk, y u must ensure that n bjects can fall t the gr und fr m the
w rk site. The area bel w the w rk site (sidewalk, etc.) must be kept clear.
•The fitters must ensure that the gr und is suited f r fixing the attachment device. If in
d ubt c nsult a structural engineer.
•The anch rage device n the r f is designed f r stress in all directi ns parallel t the
installati n surface r at right angles t the anch r.
•If uncertainties arise during installati n it is imperative that y u c ntact the manufacturer.
•The r f c vering must be pr perly sealed in acc rdance with applicable guidelines.
•D cument the pr fessi nal fastening f the fall arrest system t the building with ph t s
f each fitting situati n.
•Ensure that stainless steel d es n t c me int any c ntact with swarf r steel t ls, as this
may lead t c rr si n.
•All stainless steel b lts must be greased with a suitable lubricant bef re installati n.
•Y u sh uld plan, install and use the anch rage p int in such a way that n ne can fall
ver the edge if the pers nal pr tective equipment is used pr perly. (See planning
d cuments at www.inn tech-safety.eu)
•At the access t the r f safety system y u must d cument the p siti ns f the anch rage
devices by means f diagrams (e.g. view f the r f fr m ab ve).
•The minimum free space necessary between the edge and the gr und is calculated as
f ll ws:
Manufacturer's specificati n f the pers nal pr tective equipment used including deflecti n
f the cable + b dy height + 1 m safety margin.

Page 3 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
INSTRUCTIONS FOR
INSTALLATION AND USE
SAFETY INSTRUCTIONS
•Fastening n the INNOTECH QUADRAT-11 always ccurs thr ugh the eyeb lt with a
carabiner and must be used with pers nal pr tective equipment in acc rdance with EN
361 (safety harness) and EN 363 (fall arrest system).
•F r h riz ntal use, nly th se fasteners may be used that are suited f r this purp se and
have been tested f r the respective edges (sharp edges, sheet with trapez idal
c rrugati ns, steel girder, c ncrete, etc.).
•There is a hazard when c mbining individual elements f the specified units, since the safe
functi n f ne f the elements can be impaired thr ugh the c mbinati n. (f ll w the
specific instructi ns pr vided with each element!)
•Bef re use, y u must visually check the c mplete fall arrest system f r bvi us defects
(e.g. l se screws, def rmati ns, abrasi n, c rr si n, defective r f sealing, etc.).
If there are any d ubts c ncerning the safe functi n f the restraint system, it must be
inspected by an expert (written d cumentati n).
•At least nce a year, an expert must check the c mplete safety device including the
pers nal pr tective equipment used. The inspecti n by an expert must be d cumented in
the pr vided test l g.
•After a fall and the resulting strain, y u must st p using the restraint system and have it
checked by an expert (c mp nent parts, fastening t the substrate, etc.).
•The INNOTECH QUADRAT-11 was devel ped f r pers nal safety and may n t be used f r
ther purp ses. Never attach undefined l ads t the restraint system.
•D n t use safety systems if wind speeds exceed n rmal parameters.
•D n t make any changes t the enabled anch rage device.
•If used n sl ping r fs, r f avalanches (ice, sn w) must be av ided by means f
suitable devices t intercept sn w.
•If y u pr vide the restraint system t external c ntract rs, the instructi ns f r installati n
and use must be handed ver in writing.

Page 4 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
APPLICATION
As anch rage p int f r 3 people (including 1 pers n f r first-aid administrati n) with pers nal
pr tective equipment EN 361 (safety harness) and EN 363 (fall arrest system).
STANDARDS
INNOTECH QUADRAT-11 has been tested and certified f r installati n n r fs in acc rdance with
EN 795 A.
The inspection was executed both statically and dynamically on the original substrate.
MATERIAL
INNOTECH QUADRAT-11 is made f stainless steel, quality 1.4301
SIGNS AND MARKINGS
-Type designati n: INNOTECH QUADRAT-11
-Number(s) f the applicable standard(s): EN 795:2012 A
-Name r l g f the manufacturer/reseller: INNOTECH
-Manufacturer's serial number and year f manufacture: xxxx / 20xx
-Signs stating that the instructi ns specified in
the manual must be f ll wed:
DIMENSIONS
INNOTECH QUADRAT-11 ∅ 16mm
Supp rt heights: 200, 300, 400, 500, 600 mm
special lengths n request
Base plate dimensi ns: exteri r dimensi ns 235 x 235
and 4 mm thickness
ATTENTION:
If the INNOTECH QUADRAT-11 POST is used as end p int
r c rner p int f r h riz ntal lifeline systems, then it is
indeed suitable f r abs rbing high arrest f rces in the
event f a fall, h wever the basic stability f ∅16 mm
p sts is quite l w; with p sts exceeding 300 mm in height def rmati ns can ccur. C nsequently
the r f sealing must be designed in such a manner that it satisfies these requirements.
DEVELOPMENT
INNOTECH Arbeitsschutz GmbH A-4656 Kirchham, Laizing 10
w w w . i n n t e c h – s a f e t y . e u

Page 5 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
FASTENING ON THE SUBSTRATE
There are several p ssibilities f r installing the supp rts n the r f substrate.
The basic prerequisites are a statically bearing substructure and use f
the riginal fastener. If in d ubt c nsult a structural engineer.
The height f the anch r ab ve the surface f the structure sh uld n t exceed 300 mm.
FASTENING POSSIBILITIES:
a) SUBSTRATE: WOOD SANDWICHCONSTRUCTION
= Fastening set BEF-205
W d cr ss secti n f the carrying w d
at least 80 x 100 mm with ut w d plate,
w d plate thickness 20 mm (see Fig.).
Fasten with:
4 x riginal w d screws
8.0 x 120/84 mm and
8 x riginal w d screws
6.0 x 40 mm
ATTENTION only fasten 8x120 wood screws
in structural timber!
Minimum penetrati n depth in the carrying
structure is 95 mm
4 x 8.0 x 120/84
8 x 6.0 x 40 mm

Page 6 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
ALTERNATIVELY
b) SUBSTRATE: CONCRETE and HOLLOW CORE
CONCRETE SLAB
= Fastening set BEF-103
S lid c ncrete: c ncrete quality min. C 20/25.
H ll w c re slab:
c ncrete quality min. C 50/60 B4 and c ncrete thickness
f the minimum h ll w-c re slab cr ss secti n min.
25 mm.
Fasten with
4 x HILTI HUS3-H 8×55 5 VZ b lt anch rs
Strictly f ll w the riginal instructi ns
(edge distances and minimum cr ss secti ns!)
pr vided by the d wel manufacturer!!!)
B re depth min 60 mm with ø 8 mm
ATTENTION:
only fasten bolt anchors in structural concrete
(d n t fasten in screed, levelling c ncrete, blinding c ncrete, etc.)
Ensure that the pre-stressed steel strands of the hollow-
core slab are not damaged during installation!
If in doubt contact the manufacturer and specify the type
of hollow-core slab.

Page 7 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11

Page 8 f 12 Editi n 02/25/2016 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
c) ON CORRUGATED STEEL SHEETING BEARING
SHELL
= Fastening set BEF-501
Material cr ss secti n
C rrugated steel sheeting: 0.75 mm
ATTENTION: strictly ensure that y u use riginal
fasteners in acc rdance with the installati n manual
included in the fastening set!
SINGLE ANCHORAGE POINT
The single anch rage p int is appr ved f r 3 pe ple in acc rdance
with EN 795 A. After installati n it can be r tated in all directi ns.
This prevents l ping f the restraint cable.
Always use the single anch rage p int in c njuncti n with a
carabiner.
INSTALLATION - SINGLE ANCHORAGE POINT
1) Screw M16 nut nt the thread and tighten.
2) Place cable eye (eyeb lt) n the p st and fasten with the M16
l ck nut.
After fastening l sen the l ck nut a quarter turn; the anch rage
p int will n w r tate 360° ar und its wn axis.
3) Check: the l ck nut sh uld free appr ximately 2 thread turns f
the M16 threaded r d.
Attenti n: the single anch rage p int can be plastically def rmed!

Page 9 f 12 Editi n 09/26/2014 INNOTECH EAP QUAD-11
INNOTECH


SAFETY SOLUTIONS Arbeitsschutz GmbH
A C C E P T A N C E L O G
PROJECT:
PRODUCT:
units MANUFACTURING NO.:
CLIENT: CONTRACTOR: INSTALLATION
COMPANY:
SPECIALIST:
COMPANY
ADDRESS:
•Client accepts the perf rmances f the c ntract r.
•The instructi ns f r installati n and use, d wel l g and ph t d cumentati n have been
transferred t the client (building wner) and have been made available t the user. When
accessing the r f securing system, y u must d cument the p siti ns f the attachment
devices by means f diagrams (e.g. t p view f the r f).
•The expert fitter familiar with the safety system confirms that the installation work
has been executed properly, in accordance with the state of the art, and in
accordance with the manufacturer's instructions for installation and use. The safety
specifications for reliability are confirmed by the installation company.
C mments:
DOWEL LOG / PHOTO
DOCUMENTATION
Date: L cati n: D wel type: Setting
depth: Drill bit Ø: Tightening t rque:
Ph t s:
(File name)
The undersigned installati n c mpany warrants that the d wels have been pr perly pr cessed in acc rdance with the d wel manufacturer's
guidelines. (Pr per cleaning f b res, c mpliance with curing times and pr cessing temperature, edge spacing f the d wels, inspecti n f
the substrate, etc.)
Substrate (c ncrete quality C20/25), rafter dimensi n, etc.):
Installati n f the supp rt structure by:
Installati n f cable system by:
Client: Fitter:
NAME NAME
DATE, SIGNATURE DATE, SIGNATURE

Page 10 f 12 Editi n 09/26/2014 INNOTECH EAP QUAD-11
INNOTECH


SAFETY SOLUTIONS Arbeitsschutz GmbH
INSTRUCTIONS FOR
THE EXISTING SAFETY SYSTEM
The building wner must affix this n tice in a c nspicu us l cati n near the access t the system:
This system must be used in acc rdance with the state f the art and in acc rdance with
the instructi ns f r installati n and use.
The st rage l cati n f r the instructi ns f r installati n and use, inspecti n l gs, etc. is:
•Overview diagram sh wing the p siti n f the anch rage devices:
(Draw in the areas where there is a break-thr ugh hazard!)
The maximum limit values f the anch rage devices are pr vided in the respective
instructi ns f r installati n and use r the rating plate f y ur system.
If there is strain caused by fall, r if in d ubt, the anch rage device must be taken ut f service immediately and sent t
the manufacturer, r t a specialised w rksh p f r inspecti n and repair.
The same applies if there is damage t the anch rage equipment.

Page 11 f 12 Editi n 09/26/2014 INNOTECH EAP QUAD-11
INNOTECH


SAFETY SOLUTIONS Arbeitsschutz GmbH
I N S P E C T I O N L O G I
PROJECT:
PRODUCT:
units MANUFACTURING NO.:
ANNUAL SYSTEM INSPECTION EXECUTED ON:
INSPECTION POINTS:  checked and in order! DEFECTS DETECTED:
(Descripti n f defect / measures)
DOCUMENTATION:
Instructi ns f r installati n and use
Acceptance l g
D wel l g
Ph t d cumentati n
PPE (personal protective equipment against falling):
Inspection in accordance with manufacturer's specifications
Expirati n date
Annual inspecti n perf rmed
N t checked (n auth rizati n)
VISIBLE PARTS OF THE ANCHORAGE DEVICE
N def rmati n
The attachment eye can r tate
N c rr si n
Threaded j ints secured
Firm seat
ROOF SEALING:
N damage
N c rr si n
HORIZONTAL LIFELINE SYSTEM:
Attenti n:
Strictly ensure that the supplemental TEST LOG II (c py template in the installati n instructi ns / user c py)!
Acceptance result:
The safety system c rresp nds t the specificati ns in the manufacturer's instructi ns f r
installati n and use and the state f the art. Technical safety reliability is c nfirmed.
C mments:
Expert wh is familiar with the safety system: NAME:
SIGNATURE:

Page 12 f 12 Editi n 09/26/2014 INNOTECH EAP QUAD-11
INNOTECH

 QUADRAT-11
SALES AND DEVELOPMENT
INNOTECH Arbeitsschutz GmbH A-4656 Kirchham, Laizing 10
w w w . i n n t e c h – s a f e t y. e u