Inseego Wavemaker PRO User manual

Inseego WavemakerTM PRO 5G Industrial Gateway S2000e
Quick Start Guide

This guide provides instructions for setting up, connecting, and
configuring your 5G Industrial Gateway S2000e.
Front View
Six Cell Connectors
GNSS Connector for L1/L5 Coverage
4-Pin Power and GPIO
5Gbps Ethernet with
PoE PD Support
2.7Gbps USB 3.1 Type C - Supports
External USB Modem, Tethering,
or USB to Ethernet Adapter
LED Indicators
Cellular Signal SIM2 USB
Device Status SIM1 GNSS

LED LED Color Operation Meaning
Device Status White Solid
Slow Blink*
Starting Up or Updating
Low Power Mode
Red Solid Device On, No Connection
Yellow Solid Device On, External Connection
Green Solid Device On, Internal LTE Connection
Blue Solid Device On, Internal 5G Connection
Cellular Signal Red Solid RSRP >/= -102 dBm
Yellow Solid RSRP -90 dBm - -102 dBm
Green Solid RSRP -80 dBm - -90 dBm
Blue Solid RSRP <= -80 dBm
SIM (SIM1 and SIM2) O O No SIM
Red Solid SIM Error
Yellow Solid
Blinking+
SIM Installed, Slot Inactive
SIM Installed, Slot Active, Not Connected
Green Solid SIM Installed, Slot Active, Connected
USB O O No USB
Red Solid USB Error
Yellow Solid
Blinking
USB Connected, Not Active
USB Active, Not Connected
Green Solid USB Connected, Active
GNSS O O No SIM
Red Solid GPS Error
Yellow Blinking Searching/Acquiring
Green Solid Signal Acquired
Indicator LEDs
*Slow Blink is one second on, five seconds off.
+Blinking is one second on, one second off.

This guide provides instructions for setting up, connecting, and
configuring your 5G Industrial Gateway S2000e.
Step One: Install SIM Cards
• Lift the tab to open the SIM cover on the back of the device.
Setting Up Your S2000e
• Insert a Nano 4FF SIM card into the appropriate
SIM slot with the gold-colored contact points
facing down. The SIM card will click when
properly installed.
NOTE: This device supports only Nano SIM cards.
• Close the SIM cover.
Dual 4FF Nano SIM

Step Two: Connect Antennas
Torque all applicable antennas to 5 in-lbs to securely fasten.

Step Three: Identify a Location for your S2000e
• Scan the QR code to download the Inseego Mobile App
from AppStore or Google Play , or visit https://inseego.com/
inseego-connect-get-app to download the App.
• Follow instructions within the Inseego Mobile App to connect to the
S2000e and perform a location survey to identify the ideal location
for your S2000e.
• Connect your S2000e to power for the location survey.
Step Four: Install your S2000e
• Install your S2000e. Installation options include:
–Freestanding on desk or router
–Wall mount with a fixed bracket (Fixed Wall Mount Bracket Kit)
–Wall or pole mount with an adjustable bracket (Adjustable Wall
Mount Bracket Kit)
–DIN rail (DIN Rail Mount Bracket Kit)
NOTE: For information on installation options, see the User Guide available online at https://www.
inseego.com/download/S2000e_user_guide.pdf.
• Use the Inseego Mobile App to orient and fine tune antennas for the
best signal.

Monitoring and Managing Your S2000e
Once your 5G Industrial Gateway is connected to a device that supports
web browsing, you can use multiple options to monitor and manage your
5G Industrial Gateway:
–Inseego Mobile App - Use the same mobile app you used to install
your S2000e to perform basic device monitoring and management.
–S2000e Admin Web UI - Access the Web UI at http://192.168.1.1 for
a full set of device management features. The initial Admin password
(PW) is printed on the label of your device.
–Inseego Connect - Go to connect.inseego.com to sign up for a
free Inseego Connect account, which provides the fullest experience
for monitoring and managing S2000e devices from anywhere in the
world with access to a web browser.
• Select a power option:
–4-pin AC (50 or 60 Hz), included in box
–4-pin DC (9-28 VDC), included in box
–PoE+ Injector (60W), sold separately
–USB Power Delivery (15W Min), requires 15W from USB PD host
• Connect to a device that supports web browsing with Ethernet or
USB.
NOTE: When connecting via USB, the host system must supply a minimum of 15W with USB PD.
Step Five: Power On and Connect to your S2000e

Inseego Mobile App Requirements
More information
To access a User Guide, go to https://www.inseego.com/download/
S2000e_user_guide.pdf.
Or, from the S2000e Web UI, select Support > Customer Support > User
Guide.
Customer Service and Troubleshooting
Please reach out to your reseller.
WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH
ACTION MAY VOID THE WARRANTY. THE DEVICE IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR
TUNING IS REQUIRED. CONTACT INSEEGO TECHNICAL SUPPORT FOR INFORMATION ABOUT SERVICING
YOUR WIRELESS COMMUNICATION DEVICE.
Support and More
Any device with an Internet browser. The S2000e is compatible with all
major operating systems and the latest versions of browsers.
System Requirements
Smartphone or device on iOS 13 or above, or Android 9.0 or above.

© 2021 Inseego Corp. All Rights Reserved. PN 14945396 Rev 1