Insignia NS-Q2CS User manual

PACKAGE CONTENTS
Before using your new product, please read these instructions to prevent any damage.
NS-Q2CS
QUICK SETUP GUIDE
Charging Dock
2 Rechargeable Battery Packs
2 Custom Battery Doors
1 Magnetic USB-C plug
1 AC Adapter
Quick Setup Guide
•
•
•
•
•
•
Please see www.insigniaproducts.com for the latest
Quick Start Guide and troubleshooting.
Charging Dock for Oculus® Quest 2

FEATURES
Charges 2 Oculus touch controllers and headset simultaneously
1200mAh batteries extend your game time
Stylish stand holds and displays your touch controllers and headset
Rechargeable batteries eliminate costly disposable batteries
LED lights display charging status
Automatic shut o after controllers and headset are fully charged
Powered by AC adapter
Fully UL-certied battery cell
Incorrect battery use may result in battery leakage, overheating, or explosion.
When using batteries, make sure that you follow these instructions:
Keep batteries out of the reach of children.
Do not heat, open, puncture, mutilate, or dispose of batteries in re.
If a battery leaks, remove the battery, taking care to keep the leaked uid from
touching your skin or clothes. If uid from the battery comes into contact with
skin or clothes, ush skin with water or remove the clothing immediately. Before
inserting a new battery, thoroughly clean the controller with a damp paper towel.
Do not allow metal objects to touch the battery terminals, because they can
become hot and cause burns. For example, do not carry the battery in a pocket
with keys or coins.
Remove the battery when the controller will not be used for an extended period
of time.
SAFETY INFORMATION

1. Remove the original battery door from controllers.
2. Install the rechargeable battery pack making sure you have it aligned
with the correct polarity. Slide the custom battery door onto the controller.
INSTALLING THE BATTERY PACKS
3. Place the Touch controllers into the charging dock.
2
1
34

2. Insert the magnetic USB-C plug into the USB-C charging port of your
headset.
1. Separate the magnetic USB-C plug from the magnetic output connector
of the charging dock.
Note: The magnetic USB-C plug is small and easy to lose. We recommend
that you keep the magnetic USB-C plugged into the headset.
USING THE CHARGING DOCK

Left:Left Controller / Middle: Headset / Right: Right Controller
4. Plug the AC adapter into a power outlet, then connect the AC power
adapter to the jack on the back of the charging dock.
>>> The power LED indicators will turn on.
3. Place your headset into the charging dock and make sure that the
magnetic USB-C plug adheres to the magnetic output connector.
STATUS LED
Amber
Blue
DESCRIPTION
Charging in process
Fully charged

SPECIFICATIONS
TROUBLESHOOTING
Dimensions
Input DC 5V 3A
Output
1.5V 500mA Max x 2
5V 2.1A Max
Cable Length 4 ft. (1.2 m)
7.5 x 8.7 x 2.3 in. (19 x 22 x 5.9 cm)
1.97 x 0.78 x 0.98 in. (5 x1.98 x 2.5 cm)
Battery capacity
Battery type
Charging Dock
Rechargeable Battery Pack
Headset
Touch controllers
1200mAh
Ni-MH LSD battery
Make sure that the magnetic USB-C plug adheres to the magnetic output connector.
Make sure that each rechargeable battery is correctly installed in the Touch controller.
Make sure that the custom battery door is correctly installed on the Touch controller.
Made sure that you have connected the AC power adapter to the charging dock and
a working power outlet.
Make sure that the battery is fully charged before disconnecting from the charging dock.
Leaving your fully charged controller on the charging station for extended periods
of time will limit your battery's lifespan and performance.
Charging dock doesn’t charge
Battery life seems short

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.Reorient or relocate
the receiving antenna.
- CIncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
LEGAL NOTICES
FCC Information
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.

This product is not sponsored or approved by Facebook.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richeld,
MN 55423 U.S.A. ©2021 Best Buy. All rights reserved.
Made in China ENGLISH V3-21-1023
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com