Insignia NS-LED16RGB18 User manual

WARNING: Unroll before use. Never plug in the LED lights
when rolled up, as this can result in product damage or a re.
PACKAGE CONTENTS
• LED tape light • Double-sided tape
• Remote control • RF controller box
• Screws (2) • Quick Setup Guide
FEATURES
• Premium LEDs produce 15 selectable colors and white light
• 16 ft. LED tape light can be cut to length
• Remote control works anywhere in the room—no need to
point at the light
• Multi-step dimmer adjusts to the brightness level you want
• Four modes of ashing: Flash, Strobe, Fade, and Smooth
• Self-adhesive backing adheres to TVs, cabinets, or other
surfaces for quick, custom lighting
• Powered by AC wall power for constant use
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TAPE LIGHT
Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are about
3.9 in. (9.9 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads, as shown.
Attaching your lights
1Peel the adhesive backing o the lights, then adhere the
lights where you want them.
2Optional: Attach the double-sided tape to the back of the
RF controller box, then adhere it where you want it.
OR
Attach the RF controller box to a surface using the included
screws. There are two holes on the controller box to allow
for a rm attachment.
Notes:
• Make sure that the tape light is unrolled, otherwise it can
damage the tape light or cause a re.
• Every surface is dierent, and additional adhesive may be used
if the LED tape detaches from the surface. Small pieces of clear
tape can be used.
QUICK SETUP GUIDE
16 ft. Multi-Color
LED Tape Light
NS-LED16RGB18 / NS-LED16RGB18-C
POWER
RF Remote Controller
RGB-24 Buttons
Input : DC 12V 2A
Output : DC 12V 2A
AC adapter
Waterproof connector Waterproof connector
RF controller box
Remote control
Cut line Cut line
Tape light
Remote control
Cut line Cut line
Adjusts brightness and speed
Turns on and o
Selects a color
Changes the various transition modes
Cycles through red, green, and blue
Connecting to power
1Push both ends of the waterproof connectors together,
making sure that the arrows line up.
2Turn the cap until it is secure.
3Plug the AC adapter into a power outlet.
4Remove the plastic battery-saver tab from the remote
control.
AC adapter
Cap
Arrows

SPECIFICATIONS
• Input: 12V DC, 2A
• LED Tape Length: 16.4 ft. (5 m)
• LED quantity: 150
• LED life: 30,000 hours (approximate)
• Remote control battery: CR2025
• Remote control range: 30 ft. (9.1 m)
TROUBLESHOOTING
LEDs will not turn on.
• Press the power button to make sure that your light is
turned on, then select the color or mode you want.
• Make sure that all of the connectors are connected properly
and the AC adapter is plugged into a power outlet.
• Make sure that you have removed the plastic battery-saver
tab from the remote before use. If you already removed the
battery-saver tab, make sure that the battery still works. If
the battery does not work, replace the battery and try
again.
LEDs icker or turn on and o.
• Make sure that the power cable is not damaged.
• Make sure that both of the connectors are rmly connected
and screwed together tightly.
SAFETY INFORMATION
• To avoid damage to the tape light, do not sharply twist or
bend the tape light 90°.
• Do not cut the silver solder markings. Only cut in the center
of the copper-colored pads.
• Do not plug in your lights when they are coiled. This can
generate excess heat, which can result in product damage
or a re.
LEGAL NOTICES
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
V2 ENGLISH 17-0765
WARNING: Chemical Burn Hazard. Keep
batteries away from children.
This product contains a lithium button/coin cell
battery. If a new or used lithium button/coin
cell battery is swallowed or enters the body, it can cause
severe internal burns and can lead to death in as little as two
hours. Always completely secure the battery compartment.
If the battery compartment does not close securely, stop
using the product, remove the batteries, and keep it away
from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek
immediate medical attention.
The cells shall be disposed of properly, including keeping
them away from children.
Even used cells may cause injury.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China