Insinger AQUA SCRUBBER QUADJET User manual

❏ Undershelf on clean end
drainboard
❏ Sink overflows
❏ 1 to 8 hour pump timer
❏ Scrap trough in drainboard
❏ Overshelf with mounting brackets
(12” increments, 36” and up)
❏ End splash
❏ Disposal and cone (in soiled
drainboard, 48” minimum length)
❏ Hot water sanitizing
booster heater
❏ Scrapper drainboard with
pre-rinse faucet
❏ Shelves (cantilevered or
wall mounted)
OPTIONAL ACCESSORY EQUIPMENT
STANDARD EQUIPMENT
Item #_____________
CSI - 11400
QUADJET AQUA●SCRUBBERTM
AUTOMATIC POT & PAN WASHING SYSTEM
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com
● Patented design
● Heavy duty pump with a 2HP
TEFC motor
● Basket style high capacity lever
action waste drain
● Easy clean seamless front skirt
● Fast flow mixing faucets
● Single point electrical connection:
motor, controls, heater
● Stainless steel utensil basket
● Dual water temperature settings—
110° low/130° high
● 2.5 kw heater with low water
protection and dual
temperature control
● Welded support legs with S/S feet
● 14 gauge type 304 stainless steel
● NEMA 4X control panel enclosure
DESIGN
Automatic scrub sink reduces labor costs up to 56%. The spe-
cially designed patented nozzles scrub heavily soiled pots and
pans. Available in either right or left hand operation. Custom build
an Aqua.ScrubberTM System or choose from two pre-engineered
systems–The Dash 109 or the Marathon 140.
The QuadJet Aqua•Scrubbre jets
(PATENT PENDING) are easy to maintain
Unique whirlpool action keeps
pots and pans moving so they get
cleaner faster.

Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION - Entire unit constructed of type 304 polished stainless steel.
SINKS AND DRAINBOARDS - Constructed of 14 gauge stainless steel. All interior corners are coved to 3/4” radius. Top is 14
gauge stainless steel all welded with 11” high backsplash and 3” high splash on front and sides with a 1
3/4” rolled edge.
WASH SINK - Consists of an intake and discharge manifold both side mounted with specially designed nozzles strategically placed
for maximum scrubbing action. Intake manifold includes hinged access panel to facilitate cleaning of the intake chamber, heater and
probes.
PUMP - The pump is heavy duty cast iron construction with a 4” diameter intake and 3” diameter discharge. The motor is 2HP totally
enclosed, fan cooled with permanently sealed bearings.
SUPPORT - The wash sink is supported by heavy gauge stainless steel channels welded to the underside of the sink. H frame leg
assemblies are removable and have stainless steel adjustable bullet feet.
CONTROL PANEL - Control enclosure is made of S/S type 304 completely welded and waterproof (NEMA 4X). On/off power
switch, dual water temperature switch (low and high), on/off pump motor switch and reset switch. Heavy duty pump contactor and
overload. Heavy duty grounded plug. Controls labeled in English and Spanish.
PRE-ENGINEERED SYSTEMS - The Dash 109, Marathon 140.
Current draw amps Heater Pump & Controls Total
Motor size Heater size
2 hp 2.5 kw
Shipping weight
Dash 109 575 lbs.
Marathon 140 650 lbs.
240/60HZ/1PH .............10.4 ................ 11.9 ................... 22.3
480/60HZ/3PH .............. 3.0 ..................... 3.6 ........................ 6.6
QUADJET AQUA●SCRUBBER
DRAINBOARD
AVAILABLE
LENGTHS
15”
20”
24”
28”
36”
42”
48”
SANITIZER SINK
AVAILABLE
LENGTHS
15”
20”
24”
30”
36”
RINSE SINK
AVAILABLE LENGTHS
15”
18”
20”
24”
30”
36”
SCRAPPING STATION AVAILABLE LENGTHS
28” minimum
36”
OR
SOILED DRAINBOARD
28” minimum
36”
42”
48”
QUADJET AQUA.SCRUBBER WASHING STATION
AVAILABLE LENGTHS
36”
48”
54”
60”
28”
3M 10/06 PRINTED IN USA
Information and specifications subject to change without notice