Insportline Cylina IN 9099 User manual

USER MANUAL –EN
IN 9099 Mini Stepper inSPORTline Cylina
1

CONTENTS
SAFETY INSTRUCTIONS.................................................................................................................................... 3
PRODUCT PARTS ................................................................................................................................................ 4
EXPLOSION DIAGRAM ...................................................................................................................................... 4
PARTS LIST........................................................................................................................................................... 4
PRODUCT OPERATION GUIDE ......................................................................................................................... 5
COMPUTER FUNCTIONS ................................................................................................................................... 5
PRODUCT INSTALLATION ................................................................................................................................ 6
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ......................................................... 7
2

Please read this operation manual carefully, especially the safety warning in order to use it properly.
Keep this manual for further reference.
SAFETY INSTRUCTIONS
CAUTION
Read this user manual carefully before use.
Follow the assembly instructions carefully.
1. Ensure all screws and caps are fastened tightly upon the product is assembled completely.
2. Ensure all the spare parts are provided by the manufacturer, unauthorized replacement of spare parts are
strictly prohibited.
3. Ensure the health condition before starting to exercise. To ensure sufficient physical strength, exercise
should be done properly, regularly, and gradually.
4. Ensure children always use this equipment under adult supervision; otherwise ensure the equipment is
kept out of reach of children at all times.
5. Ensure to wear proper outfit while using this equipment to avoid any possible dangerous circumstances.
Stop using the equipment immediately and lie down for a rest in case of dizziness, pain, nausea or
display motion sickness symptoms.
6. This equipment accommodates for one (1) person at one time
7. Stop using this equipment in case of any damages are found within the unit.
8. Ensure this equipment is placed on a dry, firm and flat surface with ample space for maneuver.
9. This equipment is intended for indoor use only, which is designed for home user and max load user
weight is less than 100kgs.
10. Ensure all parts of this equipment are completely examined before use especially on the abrasive parts.
Replace the defective component immediately in order to maintain the safety level of this equipment.
Perform regular checking according to the assembly instructions of this equipment to ensure it’s safety
level at all time.
11. Disposal of this equipment shall comply with the federal and local regulations.
Correct ways to dispose this equipment
This marking indicates that this equipment should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources.
3

PRODUCT PARTS
Main frame (1) x 1
Computer (22) x 1
EXPLOSION DIAGRAM
PARTS LIST
Product NO.
Description
QTY
1
Main frame
1
2
Display
1
3
Adjustment knob
1
4
Pedal
2
5
Support pole (L)
for pedal
1
6
Support pole (R)
for pedal
1
7
Cushion rubber
2
4

8
Hydraulic rod
2
9, 11, 17, 18,
Power drive unit
1x set
19, 20, 23, 24,
25, 26, 27, 28
10, 20, 26, 27,
Master rod unit
2x set
28
12, 16
Plastic cover
4
13
Cushion
4
14
Alex sleeve
4
15
Magnetic fix base
1
21
Cable
1
22
Protective sleeve
1
29
Screw
4
30
Cushion
8
31
Screw
2
32, 33
Tapping crew + washer
1
34
Tapping screw
6
35, 36
Plastic cover
4
PRODUCT OPERATION GUIDE
OPERATION PROCEDURE
1. Rotate the adjustment knob to alter the pedal’s movement range.
2. Adjust the tension of the adjustment knob to ensure tension wire is well connected for proper function.
3. The computer will automatically shut off if there is no movement for 4 minutes.
4. The computer will automatically turn on when exercise commences.
5. All functions will automatically stop and a “STOP”sign will appear on top left corner of the computer
when there is no movement for 4 sections. Functions will recommence when you begin to exercise.
COMPUTER FUNCTIONS
SCAN
Automatically scans each function in sequence.
TIME
Displays the total time of the workout session starts from 00:00 –99:59.
COUNT
Displays the total number of steps taken during the workout session.
REPS/MIN
Displays the repetitions (or strides) per minute during the workout session.
CAL
Displays the calories burned during the workout session. NOTE: This is an approximate
measurement.
FUNCTION
To select TIME, COUNT, REPS/MIN, CALORIES To RESET the values to default. Press
BUTTON
4 secs to reset the value.
5

PRODUCT INSTALLATION
STEP 1
Open the Computer (Part: 22). Install the
battery into the correct position.
STEP 2
Connect the Computer (Part: 22) with Main Frame
cable (Part: 2).
6

STEP 3
Install the Computer (Part: 22) into
Main
Frame (Part: 1).
EXERCISE
Before using the product, please
make sure it is placed on a level
floor.
7

TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim
Procedure.
The seller is SAXO LTD with its registered office in Sakar Planina Street 1, Ruse, Bulgaria.
Company Registration Number: 117028813, registered in the Trade Register.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer”or simply the “End Customer”is the legal entity that does not
conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer”is a Businessman that buys Goods or uses services for the
purpose of using the Goods or services for his own business activities. The Buyer conforms to the
General Purchase Agreement and business conditions to the extent specified in the Commercial Code.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement
made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless
otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another
written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The
legal warranty period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a
certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its
regular or contracted features.
The Warranty does not cover defects resulting from:
-User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, not
properly assembled parts
-Mechanical damages
-Regular use (e.g. wearing out of rubber and plastic parts, joints etc.)
-Unavoidable event, natural disaster
-Improper maintenance
-Adjustments made by unqualified person
-Improper maintenance, improper placement, damages caused by low or high temperature,
water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Claims can be accepted from the head office of SAXO OOD, located in Ruse on „TEC IZTOK“
20 Street.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the
responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must
check the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase
and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number,
or eventually by the documents without the serial number. If the Buyer does not prove the validity of
the Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.

If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the
Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the
Seller is eligible to require a compensation for all the costs arising from the repair. The cost shall be
calculated according to the valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is
not accepted.
The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by
the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the
damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right
to exchange the defected Goods for a fully compatible Goods of the same or better technical
characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described
in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods,
unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is
handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the
Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of
the Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case
such agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation
in the form of a refund.
Office: Ruse, "TEC Iztok" 20 Street
Phone: [phone]
E-mail: [e-mail]
Web: www.yakosport.eu
www.insportline.bg