INSYS TwinLock B600 CashProtect 1.1 User manual

TwinLock B600 CashProtect
Vers.1.03 200217 –Errors excepted. Subject to change without notice.
Seite 1 www.insys-locks.de
Englisch English
These Brief Instructions apply for the following products by INSYS locks:
•TwinLock B600 CashProtect 1.1
•TwinLock B600 CashProtect 2.1
Note
These Brief Instructions do not replace the manual of the product. Primarily, they
provide a short briefing for the experienced user. Always consult the
corresponding manual.
Warning
Non-observance of the safety warnings!
Mediate danger to life for persons unintentionally locked in / danger of
damaging the system.
It is essential to observe the safety instructions in the manual before installing and
commissioning the product.
Also see the corresponding manuals.
For information on INSYS locks, the editor and manufacturer, visit our website
http://www.insys-locks.de.
Hereby INSYS MICROELECTRONICS GmbH declares that the systems TwinLock C/B6X0 CashProtect are in compliance with
directives 2011/65/EU and 2014/30/EU. Ask INSYS MICROLELECTRONICS GmbH via e-mail address [e-mail] to
send you the complete text of the EU Declaration of Conformity.

TwinLock B600 CashProtect
Vers.1.03 200217 –Errors excepted. Subject to change without notice.
Seite 2 www.insys-locks.de
Englisch English
Opening with Code
Activate the system.
CashProtect Select „Open”with arrow key .
Open Confirm with key Enter .
Lock 1< (optional)Confirm “Lock 1“ with or select
„Lock 2“ with and Enter .
Code Entry
User: Master Select user –or personnel number with .
Confirm with , if required.
Code EntryEnter PIN code with numeric keys or with and .
PIN code (optional) Confirm with .
Code:Enter PIN code with numeric keys or with and .
PIN code (optional)Display in case a further type of code input (card)
is required. In this case select „Code card“ with
and confirm with . See „Opening with Card“below.
Open 
Please waitThe lock bolt retracts.
Lock open: X
System unlockedOptional display with system unlocked.
You have successfully opened the lock.
 
Closing the Elektronic lock (alternatively it closes automatically via door switch)

Activate the system.
CashProtect With arrow key , select „Close“.
Close Confirm with key Enter .
Lock 1< (optional)Confirm “Lock 1“ with or select
„Lock 2“ with and Enter .
Please waitThe lock bolt extends.
Close
Lock closed: X 
System lockedOptional display with the system locked.
You have successfully closed the lock.


TwinLock B600 CashProtect
Vers.1.03 200217 –Errors excepted. Subject to change without notice.
Seite 3 www.insys-locks.de
Englisch English
Opening with Card

Activate the system.
CashProtect Select „Open” with arrow key .
Open Confirm with .
Lock 1< (optional)Confirm “Lock 1“ with or select
„Lock 2“ with and Enter .
Code EntrySelect user- or personnel number with .
User: Master Confirm with , if required.
PIN-Code With l select “Code card”.
Reading dataHold card about 1 cm in front of option box RFID.
Please waitRemove card.
PIN-Code Anzeige, wenn PIN-Code noch nicht eingegeben.
Confirm with . Further steps see
„Opening with Code“ above.
Open 
Please waitThe lock bolt retracts.
Lock open: X
System unlockedOptional display with system unlocked.
You have successfully opened the lock.
 

TwinLock B600 CashProtect
Vers.1.03 200217 –Errors excepted. Subject to change without notice.
Seite 4 www.insys-locks.de
Englisch English
Changing Your Code

Activate the system.
CashProtect Open lock, if required.
Settings Select „Settings” with
and confirm with Enter .
SettingsSelect „„Employee“ with 
Manager and confirm with .
PIN-Code
Change code „Confirm „Change code“ with .
Old codeOptional display with two locks.> , select the user-/
Lock 1<personnel number and, if necessary, confirm with .
User XX Enter PIN code currently valid.
Code
New user code Enter new PIN code.
Code
Confirm code Confirm new PIN code.
Code
PIN code
Please wait
User XX The new PIN code is saved.
Saved
Copy code?
* Yes * No Copy PIN code to lock 2 with “Yes”, if required.
Lock 2 The new PIN code is saved at lock 2, as it may be.
Saved
You have successfully changed your PIN code.