Intel AD450NX User manual

AD450NX Server System 1
Quick Start Guide
for the
AD450NX Server System
Order Number: 678270-002
This guide explains how to boot your server from the Server Configuration Software CD. After
booting the server from the CD, you can create software installation diskettes, run PC diagnostics
on the server, and read and/or print the online Product Guide.
WARNING
To avoid personal injury when unpacking the server, use only a
mechanical assist unit to lift it off the shipping pallet.
The minimum server configuration weighs about 58 kg (128 lbs), and
the maximum one weighs close to 79 kg (175 lbs). Do not attempt to lift
or move the server by the handles on the power supplies.
Contents
Select a site.......................................................................................................................... 3
After unpacking the server ................................................................................................... 4
Moving the server................................................................................................................. 4
Connect keyboard, mouse, and monitor, and printer............................................................ 6
Obtain power cords..............................................................................................................8
Turn on video monitor and server......................................................................................... 8
Power-on self test ...............................................................................................................11
Boot from the server configuration software CD..................................................................11
Access the server Product Guide........................................................................................12
Using the Acrobat .PDF files.......................................................................................12
Using the PostScript .PS files.....................................................................................13
Copy server configuration software to diskettes..................................................................13
If server won’t boot from the CD..........................................................................................13
WARNING: English (US)....................................................................................................15
AVERTISSEMENT: Français..............................................................................................17
WARNUNG: Deutsch.........................................................................................................19
AVVERTENZA: Italiano......................................................................................................21
ADVERTENCIAS: Español.................................................................................................23

2 Quick Start Guide
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and
Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied
warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not
designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other
application in which the failure of the Intel product could create a situation where personal injury or death may occur. Intel
may make changes to specifications and product descriptions at any time, without notice. No part of this document may be
copied or reproduced in any form or by any means without prior consent of Intel.
The AD450NX Server System may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request. Copies of documents which
have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777,
Germany 44-0-1793-421-333, other Countries 708-296-9333.
†Third party brands and names are property of their respective owners.
Copyright  1998 Intel Corporation.
printed on
recycled paper

AD450NX Server System 3
Select a site
The server operates reliably within the specified environmental limits. Choose a site that is
• Near a grounded power outlet
 In the United States and Canada, this means a NEMA 5-15R outlet for 100-120 V~ or a
NEMA 6-15R outlet for 200-240 V~.
 For international sites, this means a grounded power outlet applicable for the electrical
code of the region.
CAUTION
Ensure that the power service connection is through a properly grounded
outlet.
• Clean and dust-free
• Well ventilated and away from sources of heat
• Isolated from strong electromagnetic fields and electrical noise caused by electrical devices
such as air conditioners, large fans, large electric motors, radio and TV transmitters, and high
frequency security devices
• Spacious enough to provide sufficient room behind and around the server so that you can
remove AC power from it by unplugging the power cord from each power supply or wall
outlet
• Away from sources of vibration or physical shock

4 Quick Start Guide
After unpacking the server
Inspect the shipping box for evidence of mishandling during transit. If the shipping box is
damaged, photograph it for reference. After removing the contents, keep the damaged box and the
packing materials. If the contents appear damaged, file a damage claim with the carrier
immediately.
Save the shipping boxes and packing materials to repackage the server in the event you decide to
move it to another site.
Moving the server
The front casters on the base of the server are locked to prevent the server from moving.
1. Using your finger, pull the hinged plastic locks to the open position to unlock the front casters.
2. After connecting peripherals devices, cables, and power cords to the server, slide the server in
to its operating position.
3. Push the plastic locks to the closed position to lock the front casters.

AD450NX Server System 5
OM06775
A
BC
A Hinged plastic caster lock
B Closed
C Open

6 Quick Start Guide
Connect keyboard, mouse, and monitor, and printer
Keyboard Connect the signal cable of a PS/2†-compatible keyboard to the keyboard port on the
server I/O panel.
Mouse Connect the signal cable of a PS/2-compatible mouse to the mouse port on the server I/O
panel.
Monitor Connect the signal cable of the video monitor to the Super VGA†port on the server I/O
panel.
Printer Connect the signal cable of a PS/2-compatible printer to the parallel port on the server I/O
panel.

AD450NX Server System 7
OM06193
C
G
F
E D
A B
HI
A PS/2-compatible serial port 1 (COM1), 9-pin RS-232 connector
B PS/2-compatible parallel port (LPT), 25-pin bidirectional subminiature D connector
C USB ports O and 1, 4-pin connectors
D Super VGA compatible, 15-pin video connector
E PS/2-compatible serial port 2 (COM2), 9-pin RS-232 connector
F PS/2-compatible keyboard port, 6-pin miniature Deutsche Industrie Norm (DIN) connector
G PS/2-compatible mouse port, 6-pin miniature Deutsche Industrie Norm (DIN) connector
H Intelligent Chassis Management Bus (ICMB) port 1, SEMCONN†6-pin connector
I Intelligent Chassis Management Bus (ICMB) port 2, SEMCONN 6-pin connector

8 Quick Start Guide
Obtain power cords
WARNING
Do not attempt to modify or use AC power cords that are not the exact
type required.
Because power cords are not supplied for the server power supplies, you must obtain power cords
that meet the following criteria:
• The cord must be rated for the available AC voltage and have a current rating that is at least
125% of the current rating of the server.
• The connector that plugs into the wall outlet must be a grounding-type plug designed for use in
your region. It must have certification marks showing certification by an agency acceptable in
your region.
• The connector that plugs into the AC receptacle on the server power supply must be an
IEC 320, sheet C13, type female connector.
• The cord must be less than 4.5 meters (14.76 feet) long, and it must be flexible <HAR>
(harmonized) or VDE certified cordage to comply with the server safety certifications.
Turn on video monitor and server
WARNING
The push-button on/off power switch on the front panel of the server
does not turn off the AC power. To remove AC power from the server,
you must unplug each power cord from each power supply or wall
outlet.
1. Make sure all external devices, such as a video monitor, printer, keyboard, and mouse
(optional) have been connected.
2. Remove drive protection cards (if present) from the removable media drives.
3. Turn on your video monitor and printer.
4. For each power supply present in the server, plug the female end of each power cord into the
power supply input receptacle on the back of the chassis (your server may be configured with
either three or four power supplies).
✏NOTE
To plug in a power cord, push and hold the spring-loaded safety interlock
mechanism toward the edge of the power supply. Then plug the power cord
into the exposed inlet receptacle, and release the safety interlock.
5. For each power supply present in the server, plug the power cord into a properly grounded
power outlet.

AD450NX Server System 9
OM06196
A
B
F
E
C
D
I
PS
A Four power supplies (fourth power supply is redundant)
B AC power inlet receptacle and safety interlock mechanism
C Handle for removing the power supply
D Four screws
E PS LED (green) power supply okay
When lit, indicates the power supply is on and working. When off, it may indicate
either that the power supply has failed, the system-loading on the power supply is too
low to detect failure, or the supply is not properly plugged in.
F I LED (green) power supply current OK
When lit, indicates power supply is on and OK. When off, indicates the power supply
has shut down because of an overcurrent condition or the power supply has failed.

10 Quick Start Guide
6. If the server does not come on when you plug the power cords into the power outlets, press the
power switch on the front panel.
7. Verify that the power-on light on the front panel is lit. After a few seconds the power-on self
test (POST) begins. See “Power-on self test” on page 11.
OM06772
A B C D E F
H
G
A Front panel LCD
B NMI switch
C Power LED (green)
D Power fault LED (yellow)
E Cooling fault LED (yellow)
F Drive fault LED (yellow)
G Power switch
H Reset switch

AD450NX Server System 11
Power-on self test
Each time you turn on the server, the power LED on the front panel turns on and the power-on
self-test (POST) starts running. POST checks the I/O system board, processor system board,
keyboard, and most installed peripheral devices.
During the memory test, POST displays the amount of memory that it is able to access and test.
Depending on the amount of memory installed on each memory board, the test may take several
minutes.
These screen prompts and messages appear after the memory test:
Mouse initialized....
Press <F2> to enter SETUP
Do NOT press <F2>. The above message remains for a few seconds, and POST continues. The
server beeps once, and this message appears:
Operating system not found
Boot from the server configuration software CD
CAUTION
The Server Configuration Software CD contains only a limited operating
system. This limited operating system provides enough function to let you
boot from the CD and copy and use the utility and manual files from the CD.
But this limited OS is NOT intended to be copied onto diskettes or onto your
hard disk as a full-function OS that supports net-working or Windows†. To
run your server and applications, you must buy the OS of your choice and
install it on the server.
1. Open the CD tray by pressing the open/close button on the front panel of the CD-ROM drive—
the tray will slide out of the drive. See the figure on page 12.
2. Open the CD case. Press down on the center hub of the case with your finger to release the
hub tension on the CD.
CAUTION
Handle the CD only by the inner and outer edges. Do not touch the data side
of the CD—the side without the label.
3. Gently grasp the center hole and outer edge of the CD, remove it from the case, and place it
label-side up in the tray.

12 Quick Start Guide
4. Press the open/close button or gently push on the tray—it will automatically slide into the
drive.
OM06774
A B
A Open/close push-button switch
B CD tray
5. Press the reset switch on the front panel to reboot the server.
6. When POST completes, the server beeps once, boots from the CD, installs a mouse driver, and
displays the CD-ROM menu bar. Use the arrow keys to scroll through the menu bar and to
view the tasks in the pop-up menus.
✏NOTE
If you do not see the CD-ROM menu but see the following message instead,
you need to change the “Boot Device Priority” to the CD-ROM. See “If
server won’t boot from the CD” on page 13 for instructions.
Operating system not found
Access the server Product Guide
We provide two forms of Product Guide files on the CD:
• .PDF files: read and print .PDF files using the Adobe†Acrobat†Reader shipped on the CD.
• .PS (PostScript†) files: print .PS files directly to a PostScript printer.
Because printing from within Acrobat is time-consuming, we recommend printing only a small
range of pages for immediate use. If you want to print the entireProduct Guide, we recommend
printing it from the .PS files. See “Using the PostScript .PS files” on page 13.
Using the Acrobat .PDF files
Before you can print the Product Guide from within Acrobat, you must connect a printer to the
parallel port.
1. From the CD-ROM menu bar, select Read/Print Manuals and press <Enter>. The Adobe
Acrobat reader will be automatically installed on RAM disk e: (simulated disk drive in RAM
memory) and automatically started. The reader lets you view and print out a copy of the server
Product Guide.

AD450NX Server System 13
2. After the reader starts, a pop-up menu displays a list of manuals. If you are not sure which
manual applies to your server, check the title page of this Quick Start Guide for the correct
product reference.
3. The menu also includes a manual for SCSI devices in the server.
4. Use your mouse or the up and down arrow keys to select the manual. Double-click the left
mouse button or press <Enter> to load the .PDF file for the manual.
5. Use your mouse or the tab key to select the .PDF file for the manual. Double-click the left
mouse button or press an arrow key and <Enter> to view the .PDF file.
6. Follow the program options and prompts. If you need to access the Help menu, double-click
on Help or press <Alt+h>.
Using the PostScript .PS files
Before you can print the Product Guide from the CD, you must connect a printer to the parallel
port. Use the supplied PostScript files (.PS) to print out a copy of the Product Guide.
1. From the CD-ROM menu bar, select Quit to DOS and press <Enter>.
2. From the pop-up menu, select Quit Now and press <Enter>.
3. At the prompt C:\>, type dir c:\manuals and press <Enter>.
4. At the prompt, type dir c:\(manual name)\pscript and press <Enter> to see a list of
.PS files.
5. Use the copy or print command to send the .PS files directly to a PostScript printer using the
appropriate driver.
6. At the prompt C:\>, type menu and press <Enter> to return to the CD-ROM menu.
Copy server configuration software to diskettes
When you copy software from the CD onto diskettes, device drivers suitable for several different
operating systems are copied onto the diskettes. However, your operating system will read only
those drivers it can recognize, so you cannot usually check the directory of a diskette that is not
formatted for your operating system. Instead, you may see a message to the effect, “Disk not
formatted, do you want to format it now?” Don’t worry; the drivers for YOUR operating system
should be present on the diskette and available for you to load on the system.
1. Before starting, make sure that you have on hand several blank high-density diskettes.
2. From the CD-ROM menu bar, select Create Diskettes and press <Enter>.
3. Follow the prompts to copy the software onto the diskettes.
4. When finished, select Quit to DOS (on the CD-ROM menu bar) and press <Enter>.
5. Remove the CD from the drive.
If server won’t boot from the CD
It is possible that your server was shipped with the diskette drive or another device set as the first
boot device. If so, the server will try to boot from a diskette or other device rather than from the
CD we have provided. By pressing <Esc> during POST, you can override the boot sequence
specified in Setup by selecting a different primary boot device. This override is valid only for that

14 Quick Start Guide
specific boot. Subsequent boots revert back to the sequence specified in Setup. If the chosen
device fails to load the operating system, the BIOS reverts to the previous boot sequence. The
<Esc> hot key is valid while the “Press <F2> key to enter Setup” message is displayed on the
screen. At the end of POST, if the <Esc> key was pressed, a pop-up boot menu is displayed. It
allows you to change the boot sequence, or to enter Setup and permanently change the sequence.
To override the boot sequence, do this:
1. Press the reset switch on the front panel to reboot the server—the CD can be in the drive or
not.
2. When POST displays this message:
Press <F2> to enter SETUP
3. Press <Esc> and wait for the following boot menu to display:
OM08360
4. From the boot menu, select the CD-ROM drive, and press <Enter>.
5. When you see the following pop-up menu, press <Enter> to boot from the CD.
OM08361
The server should now boot from the CD, displaying a menu bar that includes creating diskettes,
diagnostics, reading/printing the manual, and quitting to DOS.
CAUTION
If the server does not operate as described in this guide, contact a qualified
service technician.

AD450NX Server System 15
WARNING: English (US)
The power supply in this product contains no user-serviceable parts. There may be more
than one supply in this product. Refer servicing only to qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type
required. A product with more than one power supply will have a separate AC power cord
for each supply.
The DC push-button on/off switch on the system does not turn off system AC power. To
remove AC power from the system, you must unplug each AC power cord from the wall
outlet or power supply.
SAFETY STEPS: Whenever you remove the chassis covers to access the inside of the
system, follow these steps:
1. Turn off all peripheral devices connected to the system.
2. Turn off the system by using the push-button on/off power switch on the system.
3. Unplug all AC power cords from the system or from wall outlets.
4. Label and disconnect all cables connected to I/O connectors or ports on the back of the
system.
5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist
strap attached to chassis ground of the system—any unpainted metal surface—when
handling components.
6. Do not operate the system with the chassis covers removed.
After you have completed the six SAFETY steps above, you can remove the system covers.
To do this:
1. Unlock and remove the padlock from the back of the system if a padlock has been
installed.
2. Remove and save all screws from the covers.
3. Remove the covers.
For proper cooling and airflow, always reinstall the chassis covers before turning on the
system. Operating the system without the covers in place can damage system parts. To
install the covers:
1. Check first to make sure you have not left loose tools or parts inside the system.
2. Check that cables, add-in boards, and other components are properly installed.
3. Attach the covers to the chassis with the screws removed earlier, and tighten them
firmly.
4. Insert and lock the padlock to the system to prevent unauthorized access inside the
system.
5. Connect all external cables and the AC power cord(s) to the system.
continued

16 Quick Start Guide
WARNING: English (continued)
A microprocessor and heat sink may be hot if the system has been running. Also, there
may be sharp pins and edges on some board and chassis parts. Contact should be made
with care. Consider wearing protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
The system is designed to operate in a typical office environment. Choose a site that is:
• Clean and free of airborne particles (other than normal room dust).
• Well ventilated and away from sources of heat including direct sunlight.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your
system into a surge suppresser and disconnect telecommunication lines to your modem
during an electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cords, because they serve as
the product’s main power disconnect.

AD450NX Server System 17
AVERTISSEMENT: Français
Le bloc d'alimentation de ce produit ne contient aucune pièce pouvant être réparée par
l'utilisateur. Ce produit peut contenir plus d'un bloc d'alimentation. Veuillez contacter un
technicien qualifié en cas de problème.
Ne pas essayer d'utiliser ni modifier le câble d'alimentation CA fourni, s'il ne correspond pas
exactement au type requis. Le nombre de câbles d'alimentation CA fournis correspond au
nombre de blocs d'alimentation du produit.
Notez que le commutateur CC de mise sous tension /hors tension du panneau avant
n'éteint pas l'alimentation CA du système. Pour mettre le système hors tension, vous devez
débrancher chaque câble d'alimentation de sa prise.
CONSIGNES DE SÉCURITÉ - Lorsque vous ouvrez le boîtier pour accéder à l’intérieur du
système, suivez les consignes suivantes :
1. Mettez hors tension tous les périphériques connectés au système.
2. Mettez le système hors tension en mettant l’interrupteur général en position OFF
(bouton-poussoir).
3. Débranchez tous les cordons d’alimentation c.a. du système et des prises murales.
4. Identifiez et débranchez tous les câbles reliés aux connecteurs d’E-S ou aux accès
derrière le système.
5. Pour prévenir les décharges électrostatiques lorsque vous touchez aux composants,
portez une bande antistatique pour poignet et reliez-la à la masse du système (toute
surface métallique non peinte du boîtier).
6. Ne faites pas fonctionner le système tandis que le boîtier est ouvert.
Une fois TOUTES les étapes précédentes accomplies, vous pouvez retirer les panneaux du
système. Procédez comme suit :
1. Si un cadenas a été installé sur à l’arrière du système, déverrouillez-le et retirez-le.
2. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr.
3. Retirez les panneaux.
Afin de permettre le refroidissement et l’aération du système, réinstallez toujours les
panneaux du boîtier avant de mettre le système sous tension. Le fonctionnement du
système en l’absence des panneaux risque d’endommager ses pièces. Pour installer les
panneaux, procédez comme suit :
1. Assurez-vous de ne pas avoir oublié d’outils ou de pièces démontées dans le système.
2. Assurez-vous que les câbles, les cartes d’extension et les autres composants sont bien
installés.
3. Revissez solidement les panneaux du boîtier avec les vis retirées plus tôt.
4. Remettez le cadenas en place et verrouillez-le afin de prévenir tout accès non autorisé
à l’intérieur du système.
5. Rebranchez tous les cordons d’alimentation c. a. et câbles externes au système.
suite

18 Quick Start Guide
AVERTISSEMENT: Français (suite)
Le microprocesseur et le dissipateur de chaleur peuvent être chauds si le système a été
sous tension. Faites également attention aux broches aiguës des cartes et aux bords
tranchants du capot. Nous vous recommandons l'usage de gants de protection.
Danger d'explosion si la batterie n'est pas remontée correctement. Remplacer uniquement
avec une batterie du même type ou d'un type équivalent recommandé par le fabricant.
Disposez des piles usées selon les instructions du fabricant.
Le système a été conçu pour fonctionner dans un cadre de travail normal. L'emplacement
choisi doit être :
• Propre et dépourvu de poussière en suspension (sauf la poussière normale).
• Bien aéré et loin des sources de chaleur, y compris du soleil direct.
• A l'abri des chocs et des sources de vibrations.
• Isolé de forts champs électromagnétiques géenérés par des appareils électriques.
• Dans les régions sujettes aux orages magnétiques il est recomandé de brancher votre
système à un supresseur de surtension, et de débrancher toutes les lignes de
télécommunications de votre modem durant un orage.
• Muni d'une prise murale correctement mise à la terre.
• Suffisamment spacieux pour vous permettre d'accéder aux câbles d'alimentation (ceux-
ci étant le seul moyen de mettre le système hors tension).

AD450NX Server System 19
WARNUNG: Deutsch
Benutzer können am Netzgerät dieses Produkts keine Reparaturen vornehmen. Das
Produkt enthält möglicherweise mehrere Netzgeräte. Wartungsarbeiten müssen von
qualifizierten Technikern ausgeführt werden.
Versuchen Sie nicht, das mitgelieferte Netzkabel zu ändern oder zu verwenden, wenn es
sich nicht genau um den erforderlichen Typ handelt. Ein Produkt mit mehreren Netzgeräten
hat für jedes Netzgerät ein eigenes Netzkabel.
Der Wechselstrom des Systems wird durch den Ein-/Aus-Schalter für Gleichstrom nicht
ausgeschaltet. Ziehen Sie jedes Wechselstrom-Netzkabel aus der Steckdose bzw. dem
Netzgerät, um den Stromanschluß des Systems zu unterbrechen.
SICHERHEISMASSNAHMEN: Immer wenn Sie die Gehäuseabdeckung abnehmen um an
das Systeminnere zu gelangen, sollten Sie folgende Schritte beachten:
1. Schalten Sie alle an Ihr System angeschlossenen Peripheriegeräte aus.
2. Schalten Sie das System mit dem Hauptschalter aus.
3. Ziehen Sie den Stromanschlußstecker Ihres Systems aus der Steckdose.
4. Auf der Rückseite des Systems beschriften und ziehen Sie alle Anschlußkabel von den
I/O Anschlüssen oder Ports ab.
5. Tragen Sie ein geerdetes Antistatik Gelenkband, um elektrostatische Ladungen (ESD)
über blanke Metallstellen bei der Handhabung der Komponenten zu vermeiden.
6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein.
Nachdem Sie die oben erwähnten ersten sechs SICHERHEITSSCHRITTE durchgeführt
haben, können Sie die Abdeckung abnehmen, indem Sie:
1. Öffnen und entfernen Sie die Verschlußeinrichtung (Padlock) auf der Rückseite des
Systems, falls eine Verschlußeinrichtung installiert ist.
2. Entfernen Sie alle Schrauben der Gehäuseabdeckung.
3. Nehmen Sie die Abdeckung ab.
Zur ordnungsgemäßen Kühlung und Lüftung muß die Gehäuseabdeckung immer wieder vor
dem Einschalten installiert werden. Ein Betrieb des Systems ohne angebrachte Abdeckung
kann Ihrem System oder Teile darin beschädigen. Um die Abdeckung wieder anzubringen:
1. Vergewissern Sie sich, daß Sie keine Werkzeuge oder Teile im Innern des Systems
zurückgelassen haben.
2. Überprüfen Sie alle Kabel, Zusatzkarten und andere Komponenten auf
ordnungsgemäßen Sitz und Installation.
3. Bringen Sie die Abdeckungen wieder am Gehäuse an, indem Sie die zuvor gelösten
Schrauben wieder anbringen. Ziehen Sie diese gut an.
4. Bringen Sie die Verschlußeinrichtung (Padlock) wieder an und schließen Sie diese, um
ein unerlaubtes Öffnen des Systems zu verhindern.
5. Schließen Sie alle externen Kabel und den AC Stromanschlußstecker Ihres Systems
wieder an.
Fortsetzung

20 Quick Start Guide
WARNUNG: Deutsch (Fortsetzung)
Der Mikroprozessor und der Kühler sind möglicherweise erhitzt, wenn das System in Betrieb
ist. Außerdem können einige Platinen und Gehäuseteile scharfe Spitzen und Kanten
aufweisen. Arbeiten an Platinen und Gehäuse sollten vorsichtig ausgeführt werden. Sie
sollten Schutzhandschuhe tragen.
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf
nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp
ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers
entsprechend.
Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der
Standort sollte:
• sauber und staubfrei sein (Hausstaub ausgenommen);
• gut gelüftet und keinen Heizquellen ausgesetzt sein (einschließlich direkter
Sonneneinstrahlung);
• keinen Erschütterungen ausgesetzt sein;
• keine starken, von elektrischen Geräten erzeugten elektromagnetischen Felder
aufweisen;
• in Regionen, in denen elektrische Stürme auftreten, mit einem
Überspannungsschutzgerät verbunden sein; während eines elektrischen Sturms sollte
keine Verbindung der Telekommunikationsleitungen mit dem Modem bestehen;
• mit einer geerdeten Wechselstromsteckdose ausgerüstet sein;
• über ausreichend Platz verfügen, um Zugang zu den Netzkabeln zu gewährleisten, da
der Stromanschluß des Produkts hauptsächlich über die Kabel unterbrochen wird.