Intel TSRMT2 User manual

Intel®TSRMT2
Carrier/Industrial Grade Server
Quick Start Guide
Order Number: A89939-002
This guide contains basic instructions for setting up the system and accessing
the Product Guide from the CD.

Disclaimer
The TSRMT2 server may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request

Information in this document is provided in connection with Intel®products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions
of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating
to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability,
or infringement of any patent, copyright or other intellectual property right. Intel products are not designed, intended or
authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of
the Intel product could create a situation where personal injury or death may occur. Intel may make changes to
specifications and product descriptions at any time, without notice.
This document contains information on products in the design phase of development. The information here is subject to
change without notice. Do not finalize a design with this information.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
No part of this document may be copied, or reproduced in any form, or by any means without prior written consent of Intel.
Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

†Other names and brands may be claimed as the property of others.
Copyright ©2001, 2002 Intel Corporation. Allrightsreserved.

Intel TSRMT2 Carrier/Industrial Grade Server iii
Quick Start Guide
Contents
Specifications ...................................................................................................................... 5
Regulatory Specifications and Disclaimers........................................................................... 6
Declaration of the Manufacturer or Importer................................................................. 6
Removing the Server from the Box....................................................................................... 9
Selecting a Site .................................................................................................................... 9
Checking the Power Connection......................................................................................... 10
Connections and Controls .................................................................................................. 13
Front Panel................................................................................................................ 13
Back Panel ................................................................................................................ 15
Connecting the Monitor, Keyboard, and Mouse.................................................................. 16
Applying Power for the First Time....................................................................................... 16
The TSRMT2 Resource CD................................................................................................ 17
The Intel®TSRMT2 Server System Product Guide............................................................. 18
Warnings.............................................................................................................................. 19
WARNING: English (US) ................................................................................................... 20
AVERTISSEMENTS : Français ......................................................................................... 22
WARNUNG: Deutsch ........................................................................................................ 24
AVVERTENZA: Italiano ..................................................................................................... 26
ADVERTENCIA: Español .................................................................................................. 28
Figures
1. Front View ...................................................................................................................5
2. Front Panel Control Locations ................................................................................... 13
3. DC Input Back Panel (AC Input Power Supply Shown Below) ................................... 15
Tables
1. TSRMT2 Server Physical Specifications...................................................................... 5
2. Front Panel Features................................................................................................. 14
3. Back Panel Features ................................................................................................. 15

iv Intel TSRMT2 Carrier/Industrial Grade Server
Quick Start Guide

Intel TSRMT2 Carrier/Industrial Grade Server 5
Quick Start Guide
Specifications
Table 1. TSRMT2 Server Physical Specifications
Specification Value
Height 1.7 inches (43 mm)
Width 17.12 inches (43.5 mm)
Depth 20 inches (508 mm)
Front clearance, minimum 2 inches (50.8 mm)
Side clearance, minimum 1 inches (25.4 mm)
Rear clearance, minimum 3.6 inches (92 mm)
Figure 1. Front View

6 Intel TSRMT2 Carrier/Industrial Grade Server
Quick Start Guide
Regulatory Specifications and Disclaimers
Declaration of the Manufacturer or Importer
We hereby certify that this product is in compliance with European Union EMC Directive
89/336/EEC, using standards EN55022 (Class A) and EN55024 and Low Voltage Directive
73/23/EEC, Standard EN60950.
Safety Compliance
USA: UL 1950 –3rd Edition/CSA 22.2. No. 950-M93
Canada: UL Certified –3rd Edition/CSA 22.2. No. 950-M93 for Canada (product bears
the single UL mark for U.S. and Canada)
Europe: Low Voltage Directive, 73/23/EECTUV/GS to EN60950 2nd Edition with
Amendments, A1 = A2 + A3 + A4
International: TUV/CB to IEC 60950 3rd Edition, EN60 950 2nd Edition + Amd 1-4,
EMKO-TSE (74-SEC) 207/94 plus international deviations
Australian / New Zealand: CB Report to IEC 60950, 3rd Edition plus Australian deviations
Electromagnetic Compatibility (EMC)
USA: FCC CFR 47 Part 2 and 15, Verified Class A Limit
Canada: IC ICES-003 Class A Limit
Europe: EMC Directive, 89/336/EEC
• EN55022, Class A Limit, Radiated & Conducted Emissions
• EN55024, ITE Specific Immunity Standard
• EN61000-4-2, ESD Immunity (Level 2 Contact Discharge, Level 3 Air
Discharge)
• EN61000-4-3, Radiated Immunity (Level 2)
• EN61000-4-4, Electrical Fast Transient (Level 2)
• EN61000-4-5, AC Surge
• EN61000-4-6, Conducted RF
• EN61000-4-8, Power Frequency Magnetic Fields
• EN61000-4-11, Voltage Dips and Interrupts
• EN61000-3-2, Limit for Harmonic Current Emissions
• EN61000-3-3, Voltage Flicker
Japan: VCCI Class A ITE (CISPR 22, Class A Limit) IEC 1000-3-2 Limit for Harmonic
Current Emissions
Australia/New Zealand: AS/NZS 3548, Class A
Taiwan: BSMI Approval, Class A
Korea: RRL Approval, Class A
Russia: GOST Approved
International: CISPR 22, Class A Limit

Intel TSRMT2 Carrier/Industrial Grade Server 7
Quick Start Guide
FCC Electromagnetic Compatibility Notice (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operating in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference. In this
case, the user is required to correct the interference at their own expense. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on; the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment. The customer is responsible for ensuring compliance of
the modified product.
FCC Declaration of Conformity
Product Type: TSRMT2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation
250 Berry Hill Rd., Suite 100
Columbia, SC 29210
Electromagnetic Compatibility Notices (International)
Europe (CE Declaration of Conformity)
This product has been tested in accordance too, and complies with the Low Voltage Directive
(73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark
to illustrate its compliance.

8 Intel TSRMT2 Carrier/Industrial Grade Server
Quick Start Guide
Japan EMC Compatibility
English translation of the notice above:
This is a Class A product based on the standard of the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI). If this equipment is used in a domestic
environment, radio disturbance may arise. When such trouble occurs, the user may be required to
take corrective actions.
ICES-003 (Canada)
Cet appareil numérique respecte les limites bruits radioélectriques applicables aux appareils
numériques de Classe A prescrites dans la norme sur le matériel brouilleur: “Appareils
Numériques”, NMB-003 édictée par le Ministre Canadian des Communications.
English translation of the notice above:
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Canadian Department of Communications.
BSMI (Taiwan)
The BSMI Certification number and the following warning is located on the product safety label
which is located visibly on the external chassis.

Intel TSRMT2 Carrier/Industrial Grade Server 9
Quick Start Guide
Removing the Server from the Box
Carefully unpack the server. Save all packing materials in case the server needs to be shipped at a
later time.
Selecting a Site
The server operates reliably within normal office environmental limits. Select a site that meets
these criteria:
• Clean and relatively free of excess dust.
• Well-ventilated and away from sources of heat, with the ventilating openings on the server kept
free of obstructions.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields and noise caused by electrical devices such as
elevators, copy machines, air conditioners, large fans, large electric motors, radio and TV
transmitters, and high-frequency security devices.
For AC-powered servers:
• Place the server near a properly earthed, grounded, three-pronged power outlet.
 In the United States and Canada: a NEMA-compliant, 110-125 V outlet rated for 20 amps.
 In other geographic areas: a properly earthed, grounded outlet in accordance with the local
electrical authorities and electrical code of the region.
For DC-powered servers:
• Place the server near a -48 to -60 V DC supply.
• Verify that proper DC grounding is provided.
• Verify that proper insulation protects the DC connection terminals and wires.
CAUTION, ESD precautions
Electrostatic discharge (ESD) can damage disk drives, add-in boards, and
other parts. This server can withstand normal levels of environmental ESD.
However, we recommend doing all procedures in this guide only at an
ESD-protected workstation. If one is not available, you can provide some
ESD protection by wearing an anti-static wrist strap attached to chassis
ground of the server when handling components (e.g. any unpainted metal
surface).
CAUTION, Use grounded outlet
Make sure that the power service connection is through a properly grounded
outlet.

10 Intel TSRMT2 Carrier/Industrial Grade Server
Quick Start Guide
Checking the Power Connection
WARNING
The Power button on the Front Control Panel of the server does not
completely remove AC power. To completely remove AC power from
the server, you must unplug/disconnect the power connection from the
system. Unplugging/disconnecting the power connection removes the
+12 Volt standby power that is present when the server is powered
down.
WARNING
Do not modify or use a supplied AC power cord if it is not the exact type
required in the region where the server will be installed and used.
Replace the cord with the correct type. Refer to the cord requirements
described below.
Do not connect power to the server (AC or DC) if you will be adding
internal parts (boards, DIMMs, removable media drives). For these
installation procedures, see the Intel®TSRMT2 Server System Product
Guide.
WARNING
The DC power source may produce hazardous voltage levels
exceeding -60 VDC and high energy levels above 240VA that may cause
electric shock or burns. All DC input connections should be made only
by a qualified service person only to prevent injury. All wiring
terminals connected to the DC input terminal block must be fully
insulated with no exposed bare metal.
If an AC power supply is installed:
Mains AC power disconnect: The AC power cord(s) is considered the
mains disconnect for the server and must be readily accessible when
installed. If the individual server power cord(s) will not be readily
accessible for disconnection then you are responsible for installing an
AC power disconnect for the entire rack unit. This mains disconnect
must be readily accessible, and it must be labeled as controlling power to
the entire rack, not just to the server(s). To remove all power, the
AC cord must be removed.