Intel R2000LT2 Configuration guide

Intel®Server System R2000LH2/T2
Product Family
Technical Product Specification
Revision 1.0
April 2013
Enterprise Platforms and Services Division

Revision History Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
ii
Revision History
Date
Revision
Number
Modifications
June 2012
0.8
Updates to images and all sections
Nov 2012 0.95
Updates to images, environmental data,system boards,power supply section,
IO Riser, GPGPU, Post Codes, and connector pinouts
April 2013
1.0
Updates to Power Supply section, POST Codes, and formatting
Disclaimers
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR
INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly,
in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION
CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES,
SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH,
HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS'
FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL
INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR
NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF
THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not
rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined". Intel reserves
these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from
future changes to them. The information here is subject to change without notice. Do not finalize a design with this
information.
The products described in this document may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your
product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may
be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.htm

Intel® Server System R2000LH2/T2 Product Family TPS Table of Contents
Revision 1.0
iii
Table of Contents
1. Introduction ........................................................................................................................1
1.1 Chapter Outline......................................................................................................1
1.2 Server Board Use Disclaimer.................................................................................2
2. Product Family Overview...................................................................................................3
2.1 Chassis Dimensions...............................................................................................6
2.2 System Level Environmental Limits........................................................................7
2.3 System Features and Options Overview ................................................................9
2.3.1 Hot Swap Hard Drive Bay and Front Panel Options ...............................................9
2.3.2 Back Panel Features............................................................................................10
2.3.3 Front Control Panel Options.................................................................................10
2.4 Server Board Features Overview .........................................................................12
2.5 Available Front Bezel Support..............................................................................13
2.6 Available Rack and Cabinet Mounting Kit Options................................................14
3. Power Subsystem.............................................................................................................15
3.1 Mechanical Overview...........................................................................................16
3.2 Power Connectors................................................................................................18
3.2.1 Power Supply Module Card Edge Connector.......................................................18
3.3 Power Supply Module Efficiency ..........................................................................19
3.4 AC and DC Power Cord Specification Requirements ...........................................20
3.5 AC Input Specifications........................................................................................21
3.5.1 Power Factor........................................................................................................21
3.5.2 AC Input Voltage Specification.............................................................................21
3.5.3 AC Line Isolation Requirements...........................................................................21
3.5.4 AC Line Dropout/Holdup ......................................................................................21
3.5.5 AC Line Fuse .......................................................................................................22
3.5.6 AC Inrush.............................................................................................................22
3.5.7 AC Line Transient Specification ...........................................................................22
3.5.8 Susceptibility Requirements.................................................................................23
3.5.9 Electrostatic Discharge Susceptibility...................................................................23
3.5.10 Fast Transient/Burst.............................................................................................23
3.5.11 Radiated Immunity...............................................................................................23
3.5.12 Surge Immunity....................................................................................................23
3.5.13 Power Recovery...................................................................................................24
3.5.14 Voltage Interruptions............................................................................................24
3.5.15 Protection Circuits................................................................................................24
3.5.16 Over-current Protection (OCP).............................................................................24
3.5.17 Over-voltage Protection (OVP).............................................................................24
3.5.18Over-temperature Protection (OTP) .....................................................................25
3.6 1600W DC Power Supply Support .......................................................................26

Table of Contents Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
iv
3.6.1 Power Supply Module Efficiency ..........................................................................26
3.6.2 DC Inlet Connector...............................................................................................26
3.6.3 DC Input Voltage Specification.............................................................................26
3.6.4 DC Holdup/Dropout Time.....................................................................................26
3.6.5 DC Line Fuse.......................................................................................................27
3.6.6 DC Inrush.............................................................................................................27
3.6.7 DC Line Surge Voltages (Line Transients) ...........................................................27
3.6.8 Residual Voltage Immunity in Standby Mode .......................................................28
3.6.9 Protection Circuits................................................................................................28
3.6.10 Over Temperature Protection (OTP) ....................................................................29
3.7 Cold Redundancy Support ...................................................................................30
3.7.1 Powering on Cold Standby Supplies to Maintain Best Efficiency..........................30
3.7.2 Powering on Cold Standby Supplies during a Fault or Over Current Condition.....31
3.7.3 BMC Requirements..............................................................................................31
3.7.4 Power Supply Turn On Function ..........................................................................31
3.8 Closed Loop System Throttling (CLST)................................................................32
3.9 Smart Ride Through (SmaRT)..............................................................................32
3.10 Power Supply Status LED....................................................................................32
4. Thermal Management.......................................................................................................33
4.1 Thermal Operation and Configuration Requirements............................................33
4.2 Thermal Management Overview ..........................................................................35
4.2.1 Set Throttling Mode..............................................................................................35
4.2.2 Altitude.................................................................................................................35
4.2.3 Set Fan Profile .....................................................................................................36
4.2.4 Fan PWM Offset...................................................................................................36
4.2.5 Quiet Fan Idle Mode.............................................................................................36
4.2.6 Thermal Sensor Input for Fan Speed Control.......................................................37
4.3 System Fans........................................................................................................39
4.3.1 Lower Fan Board..................................................................................................41
4.3.2 Upper Fans..........................................................................................................42
4.4 Power Supply Module Fan ...................................................................................43
5. System Storage and Peripheral Drive Bays Overview...................................................44
5.1 2.5” Hard Disk Drive Support................................................................................44
5.1.1 2.5” Drive Hot-Swap Backplane Overview............................................................46
5.2 3.5” Hard Disk Drive Support................................................................................48
5.2.1 3.5” Drive Hot-Swap Backplane Overview............................................................49
5.3 Optical Drive Support...........................................................................................52
5.4 Solid State Drive (SSD) Support...........................................................................53
5.5 Low Profile eUSB SSD Support ...........................................................................54
5.6 SATA DOM Support.............................................................................................55
6. Storage Controller Options Overview.............................................................................56

Intel® Server System R2000LH2/T2 Product Family TPS Table of Contents
Revision 1.0
v
6.1 Embedded SATA/SAS Controller Support............................................................56
6.2 Embedded Software RAID Support......................................................................58
6.2.1 Intel®Embedded Server RAID Technology 2 (ESRT2).........................................58
6.2.2 Intel®Rapid Storage Technology (RSTe) .............................................................58
7. Front Control Panel and I/O Panel Overview..................................................................60
7.1 I/O Panel Features...............................................................................................60
7.2 Control Panel Features ........................................................................................61
8. Intel®Local Control Panel................................................................................................65
8.1 LCD Functionality.................................................................................................66
8.2 Main Menu...........................................................................................................68
8.3 Event Menu..........................................................................................................69
8.4 View Menu...........................................................................................................70
8.4.1 System FW Version (SysFwVer)..........................................................................70
8.4.2 System Information (SysInfo)...............................................................................70
8.4.3 BMC IP Configuration...........................................................................................71
8.4.4 RMM4 IP Configuration........................................................................................71
8.4.5 Power...................................................................................................................72
8.4.6 Last Post Code (Last PC).....................................................................................72
8.5 Config Menu.........................................................................................................73
8.5.1 IP Version ............................................................................................................73
8.5.2BMC IP.................................................................................................................73
8.5.3 RMM4 IP..............................................................................................................75
8.5.4 Boot Device..........................................................................................................75
8.5.5 Banner .................................................................................................................76
9. PCI Riser Card Support....................................................................................................77
9.1 Riser Slot Overview..............................................................................................77
9.2 GPGPU Support on the PCIe Risers....................................................................79
9.2.1 GPGPU Power.....................................................................................................79
9.2.2 GPGPU Cable......................................................................................................79
9.3 Wattage Limitation of the PCI Loading .................................................................80
9.4 Riser Slot Mapping..............................................................................................81
9.5 Riser Card Drawing..............................................................................................82
10. Additonal System Boards................................................................................................83
10.1 Power Distribution Board (PDB)...........................................................................83
10.2 Setting the Power Supply Addressing for PMBus and FRU..................................83
10.3 12V Over Current Protection................................................................................83
10.3.1 Over Current Protection Circuits...........................................................................83
10.4 Power Supply Keying...........................................................................................84
10.5 PDB Connectors ..................................................................................................84
10.5.1 Grounding............................................................................................................84
10.5.2 Power Supply Card Edge Connectors..................................................................84

Table of Contents Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
vi
10.5.3 Motherboard Power Connectors...........................................................................85
10.5.4 Motherboard Signal from PDB..............................................................................86
10.5.5 GPGPU Power Connectors..................................................................................86
10.5.6 Upper Fan Connector...........................................................................................87
10.6 PDB Drawing........................................................................................................88
11. Front Panel........................................................................................................................89
12. IO Module Support ...........................................................................................................90
13. Intel®Intelligent Power Node Manager (NM)...................................................................92
13.1 Overview..............................................................................................................92
13.1.1 Hardware Requirements ......................................................................................92
13.1.2 Features...............................................................................................................92
13.1.3 Role of BMC in NM ..............................................................................................93
13.1.4 ME System Management Bus (SMBus) Interface.................................................94
13.1.5 PECI 3.0...............................................................................................................94
13.1.6 PECI Proxy ..........................................................................................................94
13.1.7 ME Power and Firmware Startup..........................................................................95
13.1.8 ME Firmware Update ...........................................................................................95
13.1.9 NM Discovery OEM SDR .....................................................................................95
13.1.10 SmaRT/CLST.......................................................................................................96
Appendix A: Integration and Usage Tip ................................................................................97
Appendix B: POST Code Diagnostic LED Decoder..............................................................98
Appendix C: POST Code Errors...........................................................................................104
Glossary ................................................................................................................................111
Reference Documents..........................................................................................................114

Intel® Server System R2000LH2/T2 Product Family TPS List of Figures
Revision 1.0
vii
List of Figures
Figure 1. System Overview.........................................................................................................3
Figure 2. System Assembly.........................................................................................................3
Figure 3. Chassis Dimensions.....................................................................................................6
Figure 4. System Components Overview....................................................................................9
Figure 5. 2.5" Hot Swap Hard Drive Bay - 8 Drive Configuration.................................................9
Figure 6. 3.5" Hotswap Hard Drive Bay - 4 Drive Configuration...................................................9
Figure 7. Back Panel Feature Identification...............................................................................10
Figure 8. Front Control Panel Options.......................................................................................10
Figure 9. Intel®Server Board S4600LH2/LT2............................................................................12
Figure 10. Optional Front Bezel (Intel Product Order Code – A2UBEZEL)................................13
Figure 11. Installing the Front Bezel..........................................................................................13
Figure 12. Power Supply...........................................................................................................15
Figure 13. Power Supply Module Mechanical Drawing..............................................................16
Figure 14. Power Supply Module ..............................................................................................16
Figure 15. AC and DC Power Supplies – Connector View ........................................................17
Figure 16. AC Power Cord........................................................................................................20
Figure 17. DC Power Cord........................................................................................................20
Figure 18. 75VDC Test .............................................................................................................27
Figure 19. 0VDC Test ...............................................................................................................28
Figure 20. Fan Control Model....................................................................................................38
Figure 21. System Fan Identification.........................................................................................39
Figure 22. System Fan Assembly..............................................................................................40
Figure 23. Upper and Lower System Fan Connections.............................................................41
Figure 24. Lower Fan Board......................................................................................................41
Figure 25. Lower Fan Board Dimensions..................................................................................42
Figure 26. Upper Fans Connectors on PDB..............................................................................42
Figure 27. 8 x 2.5" Hard Drive Configuration.............................................................................44
Figure 28. 2.5” Hard Disk Drive Assembly.................................................................................45
Figure 29. 2.5” Drive LEDs........................................................................................................45
Figure 30. 2.5” Drive Hot-Swap Backplane Assembly...............................................................46
Figure 31. 2.5” Drive Hot-Swap Backplane – Front Side...........................................................46
Figure 32. 2.5” Drive Hot-Swap Backplane – Back Side............................................................47
Figure 33. 4 x 3.5" Hard Drive Configuration.............................................................................48
Figure 34. 3.5” Hard Disk Drive Assembly.................................................................................48
Figure 35. 3.5” Drive LEDs........................................................................................................49
Figure 36. 3.5” Drive Hot-Swap Backplane Assembly...............................................................50
Figure 37. 3.5” Drive Hot-Swap Backplane – Front Side...........................................................50
Figure 38. 3.5” Drive Hot-Swap Backplane – Back Side............................................................51
Figure 39. Optical Drive Support...............................................................................................52

List of Figures Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
viii
Figure 40. Optical Drive Assembly............................................................................................52
Figure 41. 2.5" Solid State Drive (SSD) Mounting Option..........................................................53
Figure 42. Low Profile eUSB SSD Support ...............................................................................54
Figure 43. InnoDisk* Low Profile SATA DOM............................................................................55
Figure 44. Embedded SATA/SAS Controller Support................................................................56
Figure 45. Front I/O Panel Features..........................................................................................60
Figure 46. Front Control Panel Features...................................................................................61
Figure 47. Intel®Local Control Panel Option.............................................................................65
Figure 48. LCP Background Color during Normal Operation.....................................................66
Figure 49. LCP Background Color during an Error....................................................................66
Figure 50. LCP Main Menu .......................................................................................................68
Figure 51. LCP Event Menu......................................................................................................69
Figure 52. LCP View Menu .......................................................................................................70
Figure 53. System Firmware Versions Menu.............................................................................70
Figure 54. System Information Menu ........................................................................................70
Figure 55. LCP – BMC IP Configuration....................................................................................71
Figure 56. LCP – RMM4 IP Configuration.................................................................................71
Figure 57. LCP – Power Consumed by the System Currently...................................................72
Figure 58. LCP – Last BIOS Post Code....................................................................................72
Figure 59. LCP – Configure Menu Items...................................................................................73
Figure 60. LCP – IP Version Configuration Screen ...................................................................73
Figure 61. LCP – BMC IP Configuration Menu..........................................................................73
Figure 62. LCP – BMC IP Source Configuration Menu..............................................................73
Figure 63. Screen shots for Configuring IP Address, Subnet Mask, and Gateway ....................74
Figure 64. State Transition Diagram for Setting IP Address ......................................................75
Figure 65. Boot Options Configuration Menu ............................................................................75
Figure 66. Banner Configuration Menu .....................................................................................76
Figure 67. PCIe Risers and Add-in Cards .................................................................................78
Figure 68. GPGPU Cable..........................................................................................................79
Figure 69. IO Riser CPU Mapping.............................................................................................81
Figure 70. Right Riser Card Drawing.........................................................................................82
Figure 71. Left Riser Card Drawing...........................................................................................82
Figure 72. PDB .........................................................................................................................83
Figure 73. Upper Fans Connectors on PDB..............................................................................87
Figure 74. PDB Drawing ...........................................................................................................88
Figure 75. SSI Common Front Panel Board..............................................................................89
Figure 76. Mezzanine Support ..................................................................................................90
Figure 77. RMM4 Installation ....................................................................................................91
Figure 78. PECI Proxy ..............................................................................................................94
Figure 79. POST Diagnostic LED Location ...............................................................................98

Intel® Server System R2000LH2/T2 Product Family TPS List of Tables
Revision 1.0
ix
List of Tables
Table 1. Server System...............................................................................................................4
Table 2. System Feature Set.......................................................................................................4
Table 3. System Environmental Limits Summary........................................................................7
Table 4 Front Control Panel Options.........................................................................................10
Table 5. Power Supply Module Output Power Connector Pin-out .............................................18
Table 6. 1600 Watt (AC) Power Supply Efficiency (Gold)..........................................................19
Table 7. AC Power Cord Specifications ....................................................................................20
Table 8. Power Factor...............................................................................................................21
Table 9. AC Input Voltage Range..............................................................................................21
Table 10. AC Line Dropout/Holdup............................................................................................22
Table 11. AC Line Sag Transient Performance.........................................................................22
Table 12. AC Line Surge Transient Performance......................................................................23
Table 13. Performance Criteria.................................................................................................23
Table 14. Power Supply Over Current Protection......................................................................24
Table 15. Over Voltage Protection (OVP) Limits .......................................................................25
Table 16. 1600 Watt (DC) Power Supply Efficiency (Platinum) .................................................26
Table 17. 1600 Watt (DC) Power Supply Efficiency (Platinum) .................................................26
Table 18. DC Holdup/Dropout Time..........................................................................................26
Table 19. Line Voltage Transient Limits ....................................................................................28
Table 20. Over Current Protection.............................................................................................29
Table 21. Over Voltage Protection Limits..................................................................................29
Table 22. Example Load Share Threshold for Activating Supplies ............................................30
Table 23. LED Indicators...........................................................................................................32
Table 24. Lower Fan Connector Pin-out....................................................................................41
Table 25. Upper Fan Connector Pin-out (Fans 8-11).................................................................42
Table 26. 2.5” Drive Status LED States.....................................................................................45
Table 27. 2.5” Drive Activity LED States....................................................................................45
Table 28. 3.5” Drive Status LED States.....................................................................................49
Table 29. 3.5” Drive Activity LED States....................................................................................49
Table 30. Intel®RAID C600 Upgrade Key Options....................................................................57
Table 31. System Status LED State Definitions.........................................................................62
Table 32. Power/Sleep LED Functional States..........................................................................64
Table 33. GPGPU Aux Connector Pin-out (J9 and J10)............................................................79
Table 34. Wattage Limitation of PCIe Loading..........................................................................80
Table 35. Over Current Protection Circuits................................................................................83
Table 36. Power Supply Card Edge Connector Pin-out P8 and P9 ...........................................84
Table 37. Main Power (J8) Connector Pin-out...........................................................................85
Table 38. Main Power (J6) Connector Pin-out...........................................................................85
Table 39. Power Control Signals Pin-out (J5)............................................................................86

List of Tables Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
x
Table 40. GPGPU Aux Connector Pin-out (J9 and J10)............................................................86
Table 41. Upper Fan Connector Pin-out (Fans 8-11)................................................................87
Table 42. SSI Front Panel Connector Pin-out (Baseboard).......................................................89
Table 43. Intel®I/O Modules .....................................................................................................90
Table 44. POST Progress Code LED Example.........................................................................99
Table 45. POST Progress Codes..............................................................................................99
Table 46. MRC Progress Codes .............................................................................................102
Table 47. MRC Fatal Error Codes...........................................................................................103
Table 48. POST Error Messages and Handling.......................................................................105
Table 49. POST Error Beep Codes.........................................................................................110
Table 50. Integrated BMC Beep Codes...................................................................................110

Intel® Server System R2000LH2/T2 Product Family TPS List of Tables
Revision 1.0
xi
< This page intentionally left blank. >

Intel® Server System R2000LH2/T2 Product Family TPS Introduction
Revision 1.0
1
1. Introduction
This Technical Product Specification (TPS) provides system level information for the Intel®
Server System R2000LH2 and Intel®Server System R2000LT2 product families. The system
level features of both these product families are common, however the server board integrated
into them is different. The Intel®Server System R2000LH2 product family is integrated with an
Intel®Server Board S4600LH2 and the Intel®Server System R2000LTH2 product family is
integrated with the Intel®Server Board S4600LT2.
This document describes the functions and features of the integrated server system which
includes the chassis layout, system boards, power subsystem, cooling subsystem, storage
subsystem options, and available installable options. Server board specific details can be
obtained by referencing the Intel®Server Boards S4600LH2/T2 Product Specification.
In addition, design-level information related to specific server board components or subsystems
can be obtained by ordering External Product Specifications (EPS) or External Design
Specifications (EDS) related to this server generation. EPS and EDS documents are made
available under NDA with Intel and must be ordered through your local Intel representative. See
the Reference Documents section for a complete list of available documents.
1.1
Chapter Outline
This document is divided into the following chapters:
Chapter 1 – Introduction
Chapter 2 – Product Family Overview
Chapter 3 – Power Subsystem
Chapter 4 – Thermal Management
Chapter 5 – System Storage and Peripherals Drive Bay Overview
Chapter 6 – Storage Controller Options Overview
Chapter 7 – Front Control Panel and I/O Panel Overview
Chapter 8 – Intel®Local Control Panel
Chapter 9 – PCI Riser Card Support
Chapter 10 – Additional System Boards
Chapter 11 – Front Panel
Chapter 12 – IO Module Support
Chapter 13 –Intel®Intelligent Power Node Manager (NM)
Appendix A – Integration and Usage Tips
Appendix B – POST Code Diagnostic LED Decoder
Appendix C – Post Code Errors
Glossary
Reference Documents

Introduction Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
2
1.2
Server Board Use Disclaimer
Intel Corporation server boards support add-in peripherals and contain a number of high-density
Very Large Scale Integration (VLSI) and power delivery components that need adequate airflow
to cool. Intel ensures through its own chassis development and testing that when Intel®server
building blocks are used together, the fully integrated system will meet the intended thermal
requirements of these components. It is the responsibility of the system integrator who chooses
not to use Intel developed server building blocks to consult vendor datasheets and operating
parameters to determine the amount of airflow required for their specific application and
environmental conditions. Intel Corporation cannot be held responsible if components fail or the
server board does not operate correctly when used outside any of their published operating or
non-operating limits.

Intel® Server System R2000LH2/T2 Product Family TPS Product Family Overview
Revision 1.0
3
2. Product Family Overview
This generation of Intel 2U server platforms offers a variety of system options to meet the varied
configuration requirements of high-density high-performance computing environments. The
Intel®Server System R2000LH2 and Intel®Server System R2000LT2 servers are comprised of
several available 2U rack mount server systems that are integrated with either an Intel®Server
Board S4600LH2 or Intel®Server Board S4600LT2.
This chapter provides a high-level overview of the system features and available options as
supported in different platform SKUs within this server family. Greater detail for each major
system component or feature is provided in the following chapters.
Figure 1. System Overview
Figure 2. System Assembly

Product Family Overview Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
4
Note: Table 2lists features common to both server product families. Features that are unique to
one product family are identified by either denoting the server system name or the integrated
server board name.
Table 1. Server System
Server System
Integrated Server Board
Intel®Server System R2000LH2
Intel®Server Board S4600LH2
Intel®Server System R2000LT2
Intel®Server Board S4600LT2
Table 2. System Feature Set
Feature
Description
Processor support
Support for up to four Intel®Xeon®processors E5-4600 product family with a Thermal
Design Power (TDP) of up to 130 W
Memory
48 DIMM slots – 3 DIMMs / Channel – 4 memory channels per processor
Unbuffered DDR3 (UDIMM), registered DDR3 (RDIMM), Load Reduced DDR3
(LRDIMM)
Memory DDR3 data transfer rates of 800, 1066, 1333, and 1600 MT/s
DDR3 standard I/O voltage of 1.5V and DDR3 Low Voltage of 1.35V
Chipset
Intel®C600-A chipset with support for optional Storage Option Select keys
External I/O
connections 
DB-15 Video connector (Rear)
RJ-45 Serial Port A connector
S4600LH2 Dual-port Network Interface supporting 10/100/1000Mbps
S4600LT2 Dual-port Network Interface supporting 100/1000/10000Mbps
6 USB 2.0 connectors (4 rear + 2 front)
Internal I/O
connectors / headers
One 2x5 pin connector providing front panel support for two USB ports
One Type-A USB 2.0 connector
One 2x15 pin SSI-EEB compliant front panel header
One 2x7pin Front Panel Video connector
One DH-10 Serial Port B connector
Optional I/O Module
support
The following I/O modules utilize a single proprietary on-board connector. An installed I/O
module can be supported in addition to standard on-board features and any add-in
expansion cards.
Quad port 1 GbE based on Intel®Ethernet Controller I350 – RMS25CB0080
Dual port 10GBase-T Ethernet module based on Intel®Ethernet Controller I350
Dual SFP+ port 10GbE module based on Intel®82500 10 GbE controller
Single Port FDR speed Infiniband* module with QSFP connector
System Fans
11 managed system fan headers
Riser Cards
Two riser card slots:
Each riser card slot has a total of 48 PCIe lanes routed to them.
Each riser card slot supports various Full Height Full Length (FHFL) and Full Height
Half Length (FHHL) cards.
Video

Integrated 2D Video Controller
16 MB DDR3 Memory
On-board storage
controllers and
One eUSB 2x5 pin connector to support 2mm low-profile eUSB solid state devices

Intel® Server System R2000LH2/T2 Product Family TPS Product Family Overview
Revision 1.0
5
Feature
Description
options
Two 7-pin single port AHCI SATA connectors capable of supporting up to 6 GB/sec
Two SCU 4-port mini-SAS connectors capable of supporting up to 3 GB/sec
SAS/SATA
Intel®RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID
capabilities
Security
TPM Module AXXTPME5 (Accessory Option)
Server Management
Integrated Baseboard Management Controller, IPMI 2.0 compliant
Support for Intel®Server Management Software
Intel®Remote Management Module 4 Lite – Accessory Option
Intel®Remote Management Module 4 Management NIC – Accessory Option
Power Supply
Options
The server system can have up to two power supply modules installed, providing
support for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0
Combined Power
Two power supply options:
AC 1600W
DC 1600W
Storage Bay Options

8x – 2.5” SATA/SAS Hot Swap Hard Drive Bays
4x – 3.5” SATA/SAS Hot Swap Hard Drive Bays
4x – 3.5” SATA/SAS Fixed Hard Drive Bays
Available Rack
Mount Kit Options
Tool-less rack mount premium rail kit – Intel Product Code – AXXPRAIL
Value rack mount rail kit – Intel Product Code – AXXVRAIL
Cable Management Arm – Intel Product Code – AXX1U2UCMA (*supported with
AXXPRAIL only)
2-post fixed mount bracket kit – Intel Product Code – AXX2POSTBRCKT

Product Family Overview Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
6
2.1
Chassis Dimensions
Figure 3. Chassis Dimensions

Intel® Server System R2000LH2/T2 Product Family TPS Product Family Overview
Revision 1.0
7
2.2
System Level Environmental Limits
The following table defines the system level operating and non-operating environmental limits.
Table 3. System Environmental Limits Summary
Parameter
Limits
Temperature
Operating
ASHRAE Class A2 – Continuous Operation. 10ºC to 35ºC 1(50ºF to 95ºF)
with the maximum rate of change not to exceed 10°C per hour
ASHRAE Class A3 – Includes operation up to 40ºC for up to 900 hrs. per
year
ASHRAE Class A4 – Includes operation up to 45ºC for up to 90 hrs. per
year
Shipping
-40ºC to 70ºC (-40ºF to 158ºF)
Altitude
Operating
Support operation up to 3050m with ASHRAE class deratings
Humidity
Shipping
50% to 90%, non-condensing with a maximum wet bulb of 28°C (at
temperatures from 25°C to 35°C)
Shock
Operating
Half sine, 2g, 11 mSec
Unpackaged
Trapezoidal, 25 g, velocity change is based on packaged weight
Packaged
Product Weight: ≥40 to < 80
Non-palletized Free Fall Height = 18 inches
Palletized (single product) Free Fall Height = NA
Vibration
Unpackaged
5 Hz to 500 Hz 2.20 g RMS random
Packaged
5 Hz to 500 Hz 1.09 g RMS random
AC-DC
Voltage
90 Hz to 132 V and 180 V to 264 V
Frequency
47 Hz to 63 Hz
Source Interrupt
No loss of data for power line drop-out of 12 mSec
Surge Non-
operating and
operating
Unidirectional
Line to earth
Only
AC Leads 2.0 kV
I/O Leads 1.0 kV
DC Leads 0.5 kV
ESD
Air Discharged
12.0 kV
Contact
Discharge
8.0 kV
Acoustics
Sound Power
Measured
Power in Watts
<300 W ≥300 W ≥600 W ≥1000 W
Servers/Rack
Mount BA
7.0 7.0 7.0 7.0

Product Family Overview Intel® Server System R2000LH2/T2 Product Family TPS
Revision 1.0
8
Note:
1. Intel Corporation server boards contain a number of high-density VLSI and power delivery components that
need adequate airflow to cool. Intel ensures through its own chassis development and testing that when
Intel®server building blocks are used together, the fully integrated system will meet the intended thermal
requirements of these components. It is the responsibility of the system integrator who chooses not to use
Intel developed server building blocks to consult vendor datasheets and operating parameters to determine
the amount of airflow required for their specific application and environmental conditions. Intel Corporation
cannot be held responsible if components fail or the server board does not operate correctly when used
outside any of its published operating or non-operating limits.
Disclaimer Note: Intel ensures the unpackaged server board and system meet the shock
requirement mentioned above through its own chassis development and system configuration. It
is the responsibility of the system integrator to determine the proper shock level of the board
and system if the system integrator chooses different system configuration or different chassis.
Intel Corporation cannot be held responsible, if components fail or the server board does not
operate correctly when used outside any of its published operating or non-operating limits.
See the Intel®Server Board S4600LH2/T2 Power Budget and Thermal Configuration Guidelines
Tool for system configuration requirements and limitations.