Intel R1000WF Series Quick setup guide

Intel® Server System R1000WF
Product Family
System Integration and Service Guide
A guide providing instructions for the insertion and extraction of system components
and available Intel accessories and spares
Revision 1.1
August 2017
Intel® Server Products and Solutions

Intel®Server System R1000WF Product Family System Integration and Service Guide
<Blank Page>

Document Revision History
Date
Revision
Number
Modifications
July 2017
1.0
Production Release
August 2017
1.1
Figure 13 modification

Intel®Server System R1000WF Product Family System Integration and Service Guide
2
Disclaimers
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this
document.
Intel disclaims all express and implied warranties, including without limitation, the implied warranties of
merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from
course of performance, course of dealing, or usage in trade.
The products and services described may contain defects or errors known as errata which may cause
deviations from published specifications. Current characterized errata are available on request.
You may not use or facilitate the use of this document in connection with any infringement or other legal
analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free
license to any patent claim thereafter drafted which includes subject matter disclosed herein.
Intel, the Intel logo, are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
© Intel Corporation.

Intel®Server System R1000WF Product Family System Integration and Service Guide
iii
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the instructions. See also
Intel Server Boards and Server Chassis Safety Information at
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der
Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel-Serverplatinen und
Servergehäusen auf der
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document avant de
suivre toute instruction. Consultez Intel Server Boards and Server Chassis Safety Information sur le site
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las
instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
重要安全指导
在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。和/或
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm 上的 Intel®Server Boards and Server
Chassis Safety Information（《Intel 服务器主板与服务器机箱安全信息》）。

Intel®Server System R1000WF Product Family System Integration and Service Guide
iv
Warnings
Heed safety instructions: Before working with your server product, whether you are using this guide or any
other resource as a reference, pay close attention to the safety instructions. You must adhere to the
assembly instructions in this guide to ensure and maintain compliance with existing product certifications
and approvals. Use only the described, regulated components specified in this guide. Use of other
products/components will void the UL listing and other regulatory approvals of the product and will most
likely result in noncompliance with product regulations in the region(s) in which the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To remove power from
the system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is
unplugged before you open the chassis, add, or remove any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power,
telephone, and communication cables. Turn off the server and disconnect the power cord,
telecommunications systems, networks, and modems attached to the server before opening it. Otherwise,
personal injury or equipment damage can result.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper
pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle
nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or
install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide
sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled
by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper,
or you may bend or break the pins on the board.
Slide / Rail mounted equipment is not to be used as a shelf or a work space
Electrostatic Discharge (ESD)
Electrostatic discharge can cause damage to your computer or the components within it. ESD can occur
without the user feeling a shock while working inside the system chassis or while improperly handling
electronic devices like processors, memory or other storage devices, and add-in cards.
Intel recommends the following steps be taken when performing any procedures described within this
document or while performing service to any computer system.
•Where available, all system integration and/or service should be performed at a properly equipped ESD
workstation
•Wear ESD protective gear like a grounded antistatic wrist strap, sole grounders, and/or conductive shoes
•Wear an anti-static smock or gown to cover any clothing that may generate an electrostatic charge
•Remove all jewelry
•Disconnect all power cables and cords attached to the server before performing any integration or
service
•Touch any unpainted metal surface of the chassis before performing any integration or service
•Hold all circuit boards and other electronic components by their edges only
•After removing electronic devices from the system or from their protective packaging, place them
component side up on to a grounded anti-static surface or conductive foam pad. Do not place electronic
devices on to the outside of any protective packaging

Intel®Server System R1000WF Product Family System Integration and Service Guide
v
Preface
About this document
This document is written for system integrators and service technicians who are responsible for system
assembly, server upgrades, server repair, and component replacement.
This document is divided into two major sections. The first half of the document provides detailed
instructions on how to assemble a system from the bare chassis to a functional server. It will guide you
through the installation of system components and available accessories. The second half of the document
is focused on system service. It provides many reference diagrams used to identify all key physical features
of the system. It also provides detailed instructions for the replacement of field replaceable components.
For the latest revision of this document, go to http://www.intel.com/support
Document Organization
System Integration
Chapter 1 –– Server Building Block System Integration –provides grounds up assembly instructions for the
integration of individual server building blocks, starting with a bare chassis and installing all the system
boards and major server components, including power supply and system fans. This chapter can be skipped
if the server board and other major components are pre-installed in the system.
Chapter 2 –Essential System Component Integration and Service –provides instructions for adding essential
system components required to complete the integration of the server system. This includes installation of
Processors, Memory, Add-in Cards, and hot-swap storage devices
Chapter 3 –Options and Accessory Kit Integration and Service –provides instructions for adding and
removing various system options and available accessory option kits that maybe installed in the system
Chapter 4 –System Software Updates and Configuration - provides instructions for completing the
integration of the server system by updating the system software and navigating through the BIOS Setup
screens.
Chapter 5 –System Packaging Assembly –Provides package assembly instructions when re-using the Intel
packaging the system was originally shipped in.
System Service
Chapter 6 - System Features Overview –provides a high level overview of the Intel® Server System R1000WF
product family. In this chapter, you will find a list of the server system features and illustrations identifying
the major system components.
Chapter 7 –FRU Replacement –provides guidance for the replacement of system components considered as
field replaceable units (FRUs).
Appendix A –Getting Help
Appendix B –System Status LED Operating States and Definition
Appendix C –POST Code Diagnostic LED Decoder Table
Appendix D –POST Code Errors

Intel®Server System R1000WF Product Family System Integration and Service Guide
vi
Additional Information and Software
For additional information about this family of products or any of their supported accessories, refer to the
following resources available at http://www.intel.com/support.
Table 1. Server System References
For this information or software
Use this Document or Software
For in-depth technical information about
this product family
•Intel®Server Board S2600WF Technical Product Specification
•Intel®Server System R1000WF Product Family Technical Product Specification
•Intel® Remote Management Module 4 (Intel® RMM4) and Integrated BMC User
Guide
•Intel® Remote Management Module 4 Technical Product Specification
•Intel® Server System BIOS Setup Utility Guide
•Product Safety and Regulatory Compliance - Intel® Xeon® processor Scalable
Family
For system integration instructions and
service guidance
Intel® Server System R1000WF product family System Integration and Service Guide
For server configuration guidance and
compatibility
•Intel® S2600WF Product Family Configuration Guide
•Intel®Online Server Configurator Tool
For system power budget guidance
Intel®Server Board S2600WF Product Family Power Budget Tool and Thermal
Configuration Guide
For system firmware updates, onboard
device drivers, and software to manage
your Intel® Server System
http://downloadcenter.intel.com
For a complete list of supported
processors, memory, add-in cards, and
peripherals
Intel®Online Server Configurator Tool
The server system has support for several software utilities which can be used to configure system
parameters and aid in troubleshooting system issues. All available utilities can be downloaded from the
following Intel web site: http://downloadcenter.intel.com/
Table 2. System Utility Software
To do this:
Use this utility:
To obtain full system information
Intel® SYSINFO Utility – Various OS support
To read System Event Log (SEL)
Intel® SELVIEW Utility – Various OS support
Configure, Save and Restore various system options
Intel® SYSCFG Utility – Various OS support
Test onboard feature functionality
Intel® Platform Confidence Test (PCT) – uEFI only
To update system software
System Update Package (SUP) – uEFI only
Intel® One Boot Flash Update (OFU) – Various OS Support
To configure and manage Intel® RAID Controllers
Intel® RAID Web Console 2 Utility – Various OS support
Server Management Software
Intel® Active System Console

Intel®Server System R1000WF Product Family System Integration and Service Guide
vii
Table of Contents
1. SERVER BUILDING BLOCK SYSTEM INTEGRATION..........................................................................................................1
1.1 CHASSIS IDENTIFICATION ........................................................................................................................................................... 2
1.1.1 Chassis Component Identification.................................................................................................................................. 2
1.2 PREPARE CHASSIS FOR ASSEMBLY.............................................................................................................................................. 3
1.3 SYSTEM ASSEMBLY.................................................................................................................................................................... 4
1.3.1 Power Supply Module Installation................................................................................................................................11
2. ESSENTIAL SYSTEM COMPONENT INSTALLATION AND SERVICE ..............................................................................12
2.1 INTERNAL CABLE ROUTING CHANNELS .....................................................................................................................................13
2.2 SYSTEM COVER REMOVAL /INSTALLATION............................................................................................................................... 14
2.2.1 System Cover Removal...................................................................................................................................................14
2.2.2 System Cover Installation .............................................................................................................................................. 14
2.3 AIR DUCT REMOVAL /INSTALLATION........................................................................................................................................15
2.3.1 Air Duct Removal............................................................................................................................................................. 15
2.3.2 Air Duct Installation ........................................................................................................................................................ 15
2.4 PROCESSOR ASSEMBLY,INSTALLATION,AND REPLACEMENT.....................................................................................................16
2.4.1 PHM Assembly ................................................................................................................................................................. 17
2.4.2 Processor Installation..................................................................................................................................................... 19
2.4.3 Processor Replacement..................................................................................................................................................23
2.5 MEMORY MODULE (DIMM) INSTALLATION AND REPLACEMENT ................................................................................................ 25
2.5.1 DDR4 DIMM Installation................................................................................................................................................. 26
2.5.2 DDR4 DIMM Replacement..............................................................................................................................................27
2.6 DRIVE CARRIER EXTRACTION,INSTALLATION,AND ASSEMBLY................................................................................................... 28
2.6.1 Drive Carrier Extraction .................................................................................................................................................. 28
2.6.2 Drive Carrier Installation................................................................................................................................................ 28
2.6.3 2.5” HDD/SSD Drive Carrier Assembly (Intel® Server System R1208WFxxxx) ....................................................... 29
2.6.4 3.5” HDD/SSD Drive Assembly (Intel® Server R1304WFxxx) .....................................................................................30
2.6.5 2.5” SSD into a 3.5” Drive Carrier Assembly (Intel® Server R1304WFxxx) ..............................................................31
2.7 RISER CARD BRACKET ASSEMBLY -REMOVAL /INTEGRATION /INSTALLATION.......................................................................... 34
2.7.1 Riser Card Bracket Removal ..........................................................................................................................................34
2.7.2 PCIe Add-in Card Installation........................................................................................................................................ 34
2.7.3 Riser Card Bracket Installation .................................................................................................................................... 35
2.8 PCIE*NVME SSD SUPPORT –(R1208WFXXX ONLY).............................................................................................................36
2.8.1 Onboard PCIe OCuLink Connector Cabling ................................................................................................................ 36
2.8.2 4 - Port PCIe Switch Cabling.......................................................................................................................................... 37
2.8.3 Installing the Intel® VROC Upgrade Key ......................................................................................................................38
2.8.4 Removing the Intel® VROC Upgrade Key .....................................................................................................................38
2.8.5 NVMe* Drive Population Rules for Intel® VROC ..........................................................................................................39
3. OPTION AND ACCESSORY KIT INTEGRATION AND SERVICE .......................................................................................43
3.1 POWER SUPPLY MODULE –INSTALLATION /REMOVAL.............................................................................................................44
3.1.1 2nd Power Supply Module Installation ......................................................................................................................... 44
3.1.2 Power Supply Module Removal .................................................................................................................................... 44
3.1.3 Power Cord Retention Strap Installation..................................................................................................................... 45
3.1.4 Power Cord Retention Strap Removal.......................................................................................................................... 45
3.2 ESRT2 SATA RAID 5UPGRADE KEY –INSTALLATION /REMOVAL.......................................................................................... 46
3.2.1 Installing the ESRT2 SATA RAID 5 Upgrade Key ........................................................................................................ 46
3.2.2 Removing the ESRT2 SATA RAID 5 Upgrade Key....................................................................................................... 46
3.3 INTEL®REMOTE MANAGEMENT MODULE 4LITE KEY –INSTALLATION /REMOVAL .................................................................... 47
3.3.1 Intel® RMM4 Lite Key Installation ................................................................................................................................. 47
3.3.2 Intel® RMM4 Lite Key Removal ...................................................................................................................................... 47
3.4 TRUSTED PLATFORM MODULE (TPM) INSTALLATION ............................................................................................................... 48
3.5 M.2 STORAGE SSD INSTALLATION /REMOVAL ........................................................................................................................ 48

Intel®Server System R1000WF Product Family System Integration and Service Guide
viii
3.5.1 M.2 Storage SSD Installation ....................................................................................................................................... 49
3.5.2 M.2 Storage SSD Removal ............................................................................................................................................. 49
3.6 OCP EXPANSION MODULE –INSTALLATION /REMOVAL...........................................................................................................50
3.6.1 OCP Expansion Module Installation............................................................................................................................. 50
3.6.2 OCP Expansion Module Removal ................................................................................................................................. 50
3.7 INTEL®SAS RAID MODULE INSTALLATION /REMOVAL ............................................................................................................ 51
3.7.1 Intel® SAS RAID Module Installation.............................................................................................................................51
3.7.2 Intel® SAS RAID Module Removal ................................................................................................................................. 51
3.8 SINGLE INTEL®RAID MAINTENANCE FREE BACKUP UNIT (RMFBU) INSTALLATION/REMOVAL ..................................................52
3.8.1 Single Intel® RAID Maintenance Free Backup Unit (RMFBU) Installation ...............................................................52
3.8.2 Single Intel® RAID Maintenance Free Backup Unit (RMFBU) Removal .................................................................... 52
3.9 DUAL INTEL®RAID MAINTENANCE FREE BACKUP UNITS (RMFBU) INSTALLATION/REMOVAL................................................... 53
3.9.1 Dual Intel® RAID Maintenance Free Backup Unit (RMFBU) Assembly Installation ................................................53
3.9.2 Dual Intel® RAID Maintenance Free Backup Unit (RMFBU) Assembly Removal..................................................... 55
3.10 INTEL®OMNI-PATH IFT CARRIER ACCESSORY KIT INSTALLATION .............................................................................................55
3.10.1 Intel® Omni-path IFT Carrier Kit (iPC AWF1PFABKITM) –Installation............................................................56
3.10.2 Intel® Omni-path IFT Carrier Kit (iPC AWF1PFABKITP) –Installation............................................................. 58
4. SYSTEM SOFTWARE UPDATES AND CONFIGURATION ................................................................................................60
4.1 UPDATING THE SYSTEM SOFTWARE STACK .............................................................................................................................. 60
4.2 USING THE BIOS SETUP UTILITY..............................................................................................................................................60
4.2.1 Entering BIOS Setup .......................................................................................................................................................60
4.2.2 No Access to the BIOS Setup Utility ............................................................................................................................. 60
4.2.3 Navigating the BIOS Setup Utility ................................................................................................................................ 61
5. SYSTEM PACKAGING ASSEMBLY......................................................................................................................................63
5.1 ACCESSORY KIT .......................................................................................................................................................................63
6. SYSTEM SERVICE - SYSTEM FEATURES OVERVIEW......................................................................................................70
6.1 SYSTEM FEATURE REFERENCE DIAGRAMS................................................................................................................................. 70
6.1.1 Front Drive Bay Options ................................................................................................................................................. 71
6.1.2 Control Panel Features...................................................................................................................................................71
6.1.3 Front I/O Features ........................................................................................................................................................... 71
6.1.4 Back Panel Features ....................................................................................................................................................... 72
6.1.5 Server Board Features .................................................................................................................................................... 72
6.2 SYSTEM CONFIGURATION AND RECOVERY JUMPERS ................................................................................................................. 75
6.2.1 BIOS Default Jumper Block ........................................................................................................................................... 75
6.2.2 Password Clear Jumper Block.......................................................................................................................................76
6.2.3 Management Engine (ME) Firmware Force Update Jumper Block .......................................................................... 76
6.2.4 BMC Force Update Jumper Block ................................................................................................................................. 77
6.2.5 BIOS Recovery Jumper ................................................................................................................................................... 77
6.2.6 Serial Port ‘A’ Configuration Jumper............................................................................................................................78
7. SYSTEM SERVICE - FRU REPLACEMENT ..........................................................................................................................79
7.1 REPLACING A SYSTEM FAN .......................................................................................................................................................80
7.2REPLACING THE SYSTEM BATTERY............................................................................................................................................82
7.3 RACK HANDLES –INSTALLATION /REMOVAL ............................................................................................................................83
7.3.1 Installing the Rack Handles...........................................................................................................................................83
7.3.2 Removing the Rack Handles..........................................................................................................................................83
7.4 REPLACING A BACKPLANE......................................................................................................................................................... 84
7.4.1 Removing the Backplane ............................................................................................................................................... 84
7.4.2 Installing the Backplane ................................................................................................................................................ 85
7.5 REPLACING THE STANDARD FRONT CONTROL PANEL................................................................................................................ 86
7.5.1 Standard Front Control Panel Removal ...................................................................................................................... 86
7.5.2 Standard Front Control Panel Installation..................................................................................................................86
7.6 REPLACING THE SERVER BOARD ............................................................................................................................................... 87

Intel®Server System R1000WF Product Family System Integration and Service Guide
ix
7.6.1 Server Board Removal....................................................................................................................................................87
7.6.2 Server Board Installation ............................................................................................................................................... 89
APPENDIX A. GETTING HELP ................................................................................................................................................90
APPENDIX B. SYSTEM CABLE ROUTING DIAGRAMS.........................................................................................................91
APPENDIX C. SYSTEM STATUS LED OPERATING STATES AND DEFINITION................................................................93
APPENDIX D. POST CODE DIAGNOSTIC LED DECODER TABLE.......................................................................................95
APPENDIX E. POST CODE ERRORS ....................................................................................................................................102

Intel®Server System R1000WF Product Family System Integration and Service Guide
x
List of Figures
FIGURE 1. INTEL®SERVER CHASSIS R1304WFXXX –4X 3.5” FRONT DRIVE BAY ...................................................................................................... 2
FIGURE 2. CHASSIS COMPONENTS ......................................................................................................................................................................................... 2
FIGURE 3. CHASSIS COVER REMOVAL.................................................................................................................................................................................... 3
FIGURE 4. SYSTEM FAN ASSEMBLY REMOVAL ..................................................................................................................................................................... 4
FIGURE 5. SERVER BOARD INSTALLATION............................................................................................................................................................................. 5
FIGURE 6. SAS/SATA I/O CABLE ......................................................................................................................................................................................... 6
FIGURE 7. BACKPLANE POWER CABLE AND SAS/SATA DATA CABLE ATTACHMENTS................................................................................................ 6
FIGURE 8. ON-BOARD MINI-SAS HD CONNECTORS FOR EMBEDDED SATA SUPPORT .............................................................................................. 6
FIGURE 9. HOT SWAP BACKPLANE POWER CABLE AND ONBOARD CONNECTOR .......................................................................................................... 7
FIGURE 10. SYSTEM FAN ASSEMBLY INSTALLATION........................................................................................................................................................... 7
FIGURE 11. CONNECT SYSTEM FAN CABLES........................................................................................................................................................................ 8
FIGURE 12. HOT SWAP BACKPLANE I2C CABLE.................................................................................................................................................................. 8
FIGURE 13. HOT SWAP BACKPLANE I2C INTERNAL CABLE CONNECTION ...................................................................................................................... 8
FIGURE 14. BACKPLANE I2C CONNECTOR............................................................................................................................................................................ 9
FIGURE 15. FRONT CONTROL PANEL AND FRONT I/O INTERNAL CABLE CONNECTIONS............................................................................................. 9
FIGURE 16. AIR DUCT SIDE WALL AND SUPPORT BRACKET INSTALLATION .................................................................................................................10
FIGURE 17. POWER SUPPLY AND POWER SUPPLY BAY FILLER INSTALLATION............................................................................................................11
FIGURE 18. INTERNAL CABLE ROUTING...............................................................................................................................................................................13
FIGURE 19. SYSTEM COVER REMOVAL................................................................................................................................................................................14
FIGURE 20. SYSTEM COVER INSTALLATION........................................................................................................................................................................14
FIGURE 21. AIR DUCT REMOVAL ..........................................................................................................................................................................................15
FIGURE 22. AIR DUCT INSTALLATION ..................................................................................................................................................................................15
FIGURE 23. PROCESSOR HEAT SINK MODULE (PHM) REFERENCE DIAGRAM ..............................................................................................................16
FIGURE 24. PROCESSOR HEAT SINK HANDLING ................................................................................................................................................................17
FIGURE 25. PHM ASSEMBLY –HEAT SINK ORIENTATION...............................................................................................................................................17
FIGURE 26. PROCESSOR CLIP ASSEMBLY ...........................................................................................................................................................................18
FIGURE 27. PROCESSOR CLIP SUB-ASSEMBLY..................................................................................................................................................................18
FIGURE 28. PROCESSOR CLIP SUB-ASSEMBLY TO HEAT SINK ORIENTATION ..............................................................................................................19
FIGURE 29. PROCESSOR HEAT SINK MODULE (PHM)......................................................................................................................................................19
FIGURE 30. PLASTIC PROCESSOR SOCKET COVER REMOVAL ...........................................................................................................................................20
FIGURE 31. ALIGNMENT FEATURES......................................................................................................................................................................................20
FIGURE 32. PHM ALIGNMENT TO BOLSTER PLATE...........................................................................................................................................................21
FIGURE 33. CORRECT PHM PLACEMENT............................................................................................................................................................................21
FIGURE 34. INSTALLING THE PHM.......................................................................................................................................................................................22
FIGURE 35. UNINSTALLING THE PHM .................................................................................................................................................................................23
FIGURE 36. PLASTIC PROCESSOR SOCKET COVER INSTALLATION.................................................................................................................................23
FIGURE 37. PHM DISASSEMBLY...........................................................................................................................................................................................24

Intel®Server System R1000WF Product Family System Integration and Service Guide
xi
FIGURE 38. RELEASING THE PROCESSOR CARRIER CLIP FROM THE HEAT SINK ...........................................................................................................24
FIGURE 39. RELEASING PROCESSOR FROM CARRIER CLIP................................................................................................................................................24
FIGURE 40. DIMM BLANK .....................................................................................................................................................................................................25
FIGURE 41. 1U SYSTEM DIMM SLOT POPULATION REQUIREMENTS FOR THERMAL COMPLIANCE.........................................................................25
FIGURE 42. DDR4 DIMM INSTALLATION...........................................................................................................................................................................26
FIGURE 43. MEMORY REMOVAL ...........................................................................................................................................................................................27
FIGURE 44. EXTRACTING DRIVE CARRIER FROM CHASSIS ...............................................................................................................................................28
FIGURE 45. INSTALLING DRIVE CARRIER INTO CHASSIS....................................................................................................................................................28
FIGURE 46. 2.5” DRIVE CARRIER ASSEMBLY –DRIVE /DRIVE BLANK REMOVAL.........................................................................................................29
FIGURE 47. 2.5” DRIVE CARRIER ASSEMBLY –DRIVE INSTALLATION TO CARRIER ......................................................................................................29
FIGURE 48. 2.5” DRIVE CARRIER ASSEMBLY –DRIVE CARRIER AND DRIVE BLANK ALIGNMENT FEATURES............................................................30
FIGURE 49. 3.5" DRIVE CARRIER ASSEMBLY -DRIVE /DRIVE BLANK REMOVAL .........................................................................................................30
FIGURE 50. 3.5” DRIVE CARRIER ASSEMBLY –DRIVE INSTALLATION TO CARRIER ......................................................................................................31
FIGURE 51. 3.5” DRIVE CARRIER ASSEMBLY –DRIVE BLANK REMOVAL .......................................................................................................................31
FIGURE 52. 3.5" DRIVE CARRIER TO 2.5” SSD BRACKET –TAB REMOVAL..................................................................................................................32
FIGURE 53. 3.5" DRIVE CARRIER TO 2.5” SSD BRACKET –MOUNT SSD TO BRACKET.............................................................................................32
FIGURE 54. 3.5" DRIVE CARRIER TO 2.5” SSD BRACKET –MOUNT BRACKET ASSEMBLY TO CARRIER..................................................................33
FIGURE 55. 3.5" DRIVE CARRIER TO 2.5” SSD BRACKET –SECURE SSD TO CARRIER..............................................................................................33
FIGURE 56. PCI RISER ASSEMBLY REMOVAL......................................................................................................................................................................34
FIGURE 57. PCI ADD-IN CARD INSTALLATION...................................................................................................................................................................34
FIGURE 58. RISER CARD BRACKET INSTALLATION.............................................................................................................................................................35
FIGURE 59.ONBOARD PCIE OCULINK CONNECTORS FOR NVME SSD SUPPORT......................................................................................................36
FIGURE 60. BACKPLANE PCIE*DATA CABLE ATTACHMENTS .........................................................................................................................................37
FIGURE 61. INSTALLING THE INTEL®VROC UPGRADE KEY .............................................................................................................................................38
FIGURE 62. BACKPLANE CABLING FROM TWO PCIE SOURCES .......................................................................................................................................39
FIGURE 63. POWER SUPPLY MODULE INSTALLATION ......................................................................................................................................................44
FIGURE 64. POWER SUPPLY MODULE REMOVAL ..............................................................................................................................................................44
FIGURE 65. POWER CORD RETENTION STRAP INSTALLATION ........................................................................................................................................45
FIGURE 66. POWER CORD PLUGGING..................................................................................................................................................................................45
FIGURE 67. INSTALLING THE SATA RAID 5UPGRADE KEY............................................................................................................................................46
FIGURE 68. INSTALLING THE INTEL®RMM4 LITE..............................................................................................................................................................47
FIGURE 69. TRUSTED PLATFORM MODULE (TPM) INSTALLATION.................................................................................................................................48
FIGURE 70. M.2 CONNECTOR LOCATIONS .........................................................................................................................................................................48
FIGURE 71. INSTALLING M.2 DEVICE ...................................................................................................................................................................................49
FIGURE 72. REMOVING M.2 DEVICE ....................................................................................................................................................................................49
FIGURE 73. INSTALLING OCP EXPANSION MODULE.........................................................................................................................................................50
FIGURE 74. REMOVING AN OCP EXPANSION MODULE ....................................................................................................................................................50
FIGURE 75. INTEL®SAS RAID MODULE INSTALLATION ..................................................................................................................................................51

Intel®Server System R1000WF Product Family System Integration and Service Guide
xii
FIGURE 76. SINGLE INTEL®RAID MAINTENANCE FREE BACKUP UNIT (RMFBU) INSTALLATION.............................................................................52
FIGURE 77. INTEL®RAID MAINTENANCE FREE BACKUP UNIT (RMFBU) REMOVAL...................................................................................................52
FIGURE 78. AWTAUXBBUBKT 1U RMFBU MOUNTING PLATE INSTALLATION......................................................................................................53
FIGURE 79. RMFBU REMOVAL FROM STANDARD HOUSING ..........................................................................................................................................53
FIGURE 80. RMFBU INSTALLATION INTO DUAL RMFBU HOUSING .............................................................................................................................54
FIGURE 81. DUAL RMFBU ASSEMBLY INSTALLATION .....................................................................................................................................................54
FIGURE 82. DUAL RMFBU ASSEMBLY REMOVAL .............................................................................................................................................................55
FIGURE 83. FABRIC PROCESSOR CABLE INSTALLATION....................................................................................................................................................57
FIGURE 84. FABRIC CABLE PROCESSOR CONNECTOR PLACEMENT................................................................................................................................59
FIGURE 85. PACKAGE ASSEMBLY REFERENCE DIAGRAM ..................................................................................................................................................64
FIGURE 86. INTEL®SERVER SYSTEM R1000WF FEATURES OVERVIEW.......................................................................................................................70
FIGURE 87. 3.5" DRIVE BAY –4DRIVE CONFIGURATION –INTEL®SERVER SYSTEM R1304WFXXXX..................................................................71
FIGURE 88. 2.5" DRIVE BAY –8DRIVE CONFIGURATION –INTEL®SERVER SYSTEM R1208WFXXXX...................................................................71
FIGURE 89. CONTROL PANEL FEATURES.............................................................................................................................................................................71
FIGURE 90. FRONT I/O PANEL FEATURES ..........................................................................................................................................................................71
FIGURE 91. BACK PANEL FEATURES ....................................................................................................................................................................................72
FIGURE 92. SERVER BOARD FEATURE IDENTIFICATION ....................................................................................................................................................72
FIGURE 93. INTEL®LIGHT-GUIDED DIAGNOSTIC LEDS -SERVER BOARD.....................................................................................................................73
FIGURE 94. DIMM FAULT LEDS..........................................................................................................................................................................................74
FIGURE 95. SYSTEM FAN CONNECTIONS ............................................................................................................................................................................74
FIGURE 96. SYSTEM CONFIGURATION AND RECOVERY JUMPERS...................................................................................................................................75
FIGURE 97. SYSTEM FAN ASSEMBLY REMOVAL.................................................................................................................................................................80
FIGURE 98. CONNECT SYSTEM FAN CABLES......................................................................................................................................................................81
FIGURE 99. REPLACING THE BACKUP BATTERY .................................................................................................................................................................82
FIGURE 100. INSTALLING THE RACK HANDLE ....................................................................................................................................................................83
FIGURE 101. REMOVING THE RACK HANDLE......................................................................................................................................................................83
FIGURE 102. REMOVING THE BACKPLANE ..........................................................................................................................................................................84
FIGURE 103. INSTALLING THE BACKPLANE.........................................................................................................................................................................85
FIGURE 104. STANDARD FRONT CONTROL PANEL REMOVAL.........................................................................................................................................86
FIGURE 105. STANDARD FRONT CONTROL PANEL INSTALLATION ................................................................................................................................86
FIGURE 106. SERVER BOARD REMOVAL .............................................................................................................................................................................88
FIGURE 107. SERVER BOARD LIFTING .................................................................................................................................................................................88
FIGURE 108. INTEL®SERVER SYSTEM R1304WFXXXX CABLE ROUTING....................................................................................................................91
FIGURE 109. INTEL SERVER SYSTEM R1208WFXXXX CABLE ROUTING......................................................................................................................92
FIGURE 110. POST DIAGNOSTIC LED LOCATION............................................................................................................................................................95

Intel®Server System R1000WF Product Family System Integration and Service Guide
xiii
List of Tables
TABLE 1. SERVER SYSTEM REFERENCES ...............................................................................................................................................................................VI
TABLE 2. SYSTEM UTILITY SOFTWARE..................................................................................................................................................................................VI
TABLE 3. BIOS SETUP:KEYBOARD COMMAND BAR.........................................................................................................................................................61
TABLE 4. SYSTEM STATUS LED STATE DEFINITIONS.......................................................................................................................................................93
TABLE 5. POST PROGRESS CODE LED EXAMPLE ............................................................................................................................................................95
TABLE 6. MRC PROGRESS CODES .......................................................................................................................................................................................96
TABLE 7. MRC FATAL ERROR CODES..................................................................................................................................................................................97
TABLE 8. POST PROGRESS CODES.....................................................................................................................................................................................98
TABLE 9. POST ERROR CODES AND MESSAGES............................................................................................................................................................102
TABLE 10. POST ERROR BEEP CODES............................................................................................................................................................................108
TABLE 11. INTEGRATED BMC BEEP CODES ....................................................................................................................................................................109

Intel®Server System R1000WF Product Family System Integration and Service Guide
1
1. Server Building Block System Integration
Purpose
This chapter provides instructions for the integration of the following Intel server building blocks:
Intel® Server Chassis R1304WF
+ Any server board from the Intel® Server Board S2600WF product family
If your system came with the server board pre-installed in the chassis, you can skip this chapter and proceed
to Chapter 2 –Essential System Component Installation and Service to continue the system integration.
In addition to the Intel server building blocks defined above, the following system components (Sold
Separately) will also be needed to complete the full system integration:
Appropriate SAS/SATA Data Cables
Appropriate PCIe OCuLink Data Cables for NVMe support
Appropriate Riser Card(s)
Appropriate Power Supply Module(s)
Processor(s) –Intel® Xeon® processor Scalable family
Memory - DDR4 DIMMs
Appropriate Power Cable(s)
Storage Devices –HDDs, SSDs, M.2
PCIe Add-in Cards
Optional Server System Accessories
Reference the Intel® Server S2600WF Product Family Configuration Guide for a complete list of available
accessories and spares
Before You Begin
Before working with your server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
Tools and Supplies Needed
Anti-static wrist strap and conductive foam pad (recommended)
Phillips* (cross head) screwdriver (#1 and #2 bits)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.
Instruction Format
Each procedure described in this chapter will follow an illustration first format. This format will give the
reader the option to follow a quicker path to system integration by first seeing an illustration of the intended
procedure. If necessary, the reader can then follow the step-by-step instructions that will accompany each
procedure.

Intel®Server System R1000WF Product Family System Integration and Service Guide
2
1.1 Chassis Identification
Figure 1. Intel® Server Chassis R1304WFxxx –4 x 3.5” Front Drive Bay
1.1.1 Chassis Component Identification
Figure 2. Chassis Components

Intel®Server System R1000WF Product Family System Integration and Service Guide
3
1.2 Prepare Chassis for Assembly
The accessory kit included with the chassis will include the following components:
Left and right black plastic air duct side walls
Chassis Support Bracket
Separate bags of screws for mounting the server board, air duct side walls, and chassis support
bracket
DIMM Blanks –See Chapter 2 for usage
Black Mylar “No CPU” processor socket spacers –See Chapter 2 for usage
The following components will be found inside the chassis. Each should be removed:
Clear plastic air duct –See Chapter 2 for usage
A box with two processor heat sinks –See Chapter 2 for usage
Two riser card brackets –See Chapter 2 for usage
Two (3-fan) system fan assemblies
1. Remove the System Cover
Note:A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on your work surface.
Figure 3. Chassis Cover Removal
a) Loosen the two captive thumb screws located on the back edge of the system cover (See Letter “A”)
b) Slide cover back and lift upward (see Letter "B").

Intel®Server System R1000WF Product Family System Integration and Service Guide
4
2. Remove the following from the chassis:
a) Air Duct
b) Box containing two (2) processor heat sinks
c) Riser Card Brackets
d) Power Supply Module (if present)
3. Remove System Fan Modules
Figure 4. System Fan Assembly Removal
a) Remove each fan assembly module from the chassis by grasping them on each side and pulling
straight up away from the chassis mounting pins (see Letter ‘A’).
1.3 System Assembly
Note on System Integration
It is highly recommended that the system integration process defined in the following sections within this
chapter be performed in the order specified. Following these instructions will result in the proper
installation of critical system components and provide recommended cable routing. Deviating from the
prescribed process may result in improper system assembly, a longer integration process, and a less than
desired system appearance.